Search results

Results 1 to 24 of 24
  1. S

    How do you remove the mower pulley nut?

    I know this is a stupid question, but I need to remove the mower pulley but cannot see any way to hold the pulley while untightening the nut. When I held with the blade below the blade nut just loosened up. I even tried to hold the belt tight but it just slipped as well. What are the tricks...
  2. S

    Anyone looking for a Sims Cab for BX?

    If your looking for one, you may want to check out this Ebay listing. I was thinking about bidding then realized I really don't need it. But I'm sure someone here does so here's a heads up. Sims Cab on Ebay ends 2/2/06
  3. S

    Bad case of Seat Deprivation? or Kids Ice Rink?

    The neighbors probably think I'm crazy, and the wife definately does. I spent a couple hours today "plowing" my yard. Well actually I was skimming the snow off it to put on another area that I am trying to create a ice rink for my boys. I have practically moved all the snow from my back yard...
  4. S

    My Early Father's Day KK 48" Tiller Tail

    My Early Father\'s Day KK 48\" Tiller Tail On Saturday I went to the TSC that is near my lake property with the wife and youngest son to pick up a couple bucks of bolts and some new rubber boots for the boy. Upon arrival I noticed a pen in the parking lot with Clearance banner on it. I...
  5. S

    HELP! Anybody using KK 48" Tiller on a BX?

    HELP! Anybody using KK 48\" Tiller on a BX? Is anyone using a KK 48" Tiller on a BX? I just purchased one and am wondering if it can be used on the BX now that I have it. I am trying to follow the directions for cutting the PTO shaft. The book says position the tiller to the position with...
  6. S

    New Trailer For My BX

    Well I picked up my new trailer last weekend and am in the process of getting it setup for towing my BX. It is an aluminum trailer and I decided the gate would need some reinforcement to handle the BX as the supports were not on line with the tires. SO I went to my local Fab shop and had them...
  7. S

    Trailer Tie Down Point Question

    OK since Dargo had his wild ride and Spring if finally starting to hit NY I have finally (after 2 years) decided to go out and buy a new trailer that is sized to better trailer by BX1800. I am picking up a 14' Tandem Axle 7000lb rated trailer this weekend so I was at TSC last night looking at...
  8. S

    Raking Leaves the Kubota Way!

    Well many times people ask about the BX grass catcher, so this year I thought I would snap a few photos to give an idea of what can be done. This is when I love the thing!! You will notice in the first pick I put my sons Soccer ball next to the leaves to try and give a depth perspective, it...
  9. S

    Kubota Cozy Cab for BX 1800/2200's on EBay

    Kubota Cozy Cab for BX 1800/2200\'s on EBay Anyone looking for a cab for their BX1800/2200's you may want to check this out on EBAY. Cozy Cab for Kubota I assume it is the manufacturer starting to sell them on EBAY. I looked them up at this site Custom Products Website The description...
  10. S

    Blown Head Gasket Question

    Last year I blew the engine in my Cub 1811 hence my Kubota BX replacement. Well I himed and hawed about what to do with the Cub when I found a used Kohler Magnum M18 on ebay so I bought it (this was last fall). Anyhow, I got the engine in and running, but it was running rough. I tinkered off...
  11. S

    Problem with Markups

    I am having troube lately and cannot use the faces or markups. Everytime I do it kicks me back like I hit the back button on Explorer. I suspect it is from the Explorer update I recently did (from 5.5 to 6.0) but don't know for sure as I also had to re-install my Norton Internet security and...
  12. S

    Is Bigger REALLY Better?

    I was thinking........is bigger really better? (maybe Henro's spring fever is spreading) I've had a BX1800 for almost a year now and I keep reading posts from new perspective owners who are looking to purchase a machine and most everyone always says get bigger you'll need it down the road...
  13. S

    In the middle of 50hr service have question?

    I have pulled the strainer and the manual says to clean in a non-flammable solvent. What are non-flammable solvents? All the solvents that I know I have are flammable. Any ideas or suggestions would be highly appreciated especially since I do have a few filings I need to get off. Of course...
  14. S

    Price Check Price for a Cub 1811?

    Any idea what a fair price would be for a Cub 1811 with a thrown connecting rod? I have a 50" deck and a 42"(I think) front blade. I also added a sleeve hitch so the hydraulic lift could be used for a 1 bottom plow for my garden (not including the plow when I sell). Both the tractor and...
  15. S

    My new 3-point receiver hitch

    Finally got my new 3-point receiver hitch finished and here are a few pictures. I designed it looking at several posts on here, and then incorporating a few of each. I had a local fab shop build it for me. They gave me a great deal at $100 which included 2 receivers also. One for the normal...
  16. S

    BX1800 VS GARDEN

    Well I finally got a chance to plow the garden tonight. Between all the rain we've had (who hasn't right?) and getting my rear hitch built, I am only about 1 month behind normal schedule. Well I gotta say that this BX1800 is the cats meow!!! I used to do this with my old Cub 1811 and had to...
  17. S

    Grading Hydraulic Blade for 6200/7200 on a BX?

    Does anyone know if a hydraulic blade for a 6200/7200 would work on a BX1800?
  18. S

    BX Mid PTO Cover

    Why doesn't Kubota make a cover for the mid PTO? I assume the cover for the PTO is to keep it clean as well as keep others safe. I checked with my dealer to find out if they forgot to send it or if it even existed, but they told me it didn't. I am kinda dissapointed as I would like to cover...
  19. S

    Another FEL Use.........

    Well I have been itching to use my new unit, but haven't got many things that need to be done yet. The grass is just starting to grow, so there I was, trying to think of something I could do ...............then suddenly it dawned on me the potatoes we never finished digging last year in the...
  20. S

    BX Grass Catcher

    Rogue, As promised, here are some pictures of my new Grass Catcher on my BX1800. I will post some pictures tonight, but don't have time to get into much discussion on taking on/off, operations etc. as I was out picking up leaves with it right up till now and now I have to go make dinner for...
  21. S

    Ballast Question on top link and rear ballast box

    Does anyone have a rear ballast box with their BX1800 or BX2200? I just installed mine and it appears the top link is too long as the unit does not sit up straight if the top link is attached. I am attaching a photo with it attached and then will follow one without. Do I need a different top...
  22. S

    My baby has arrived!!!

    Well she finally made it here. The truck driver pulled into town around 3:00pm gave me a call to meet him in a parking lot near by that allowed easy access for him. I hurried right over but still wasn't sure how we would get it off the truck........well to my suprise this was a lowboy...
  23. S

    My BX1800 is finally on its way!!!!!!!!!!!!!!!!!!!

    Finally after nearly 3 weeks, my 1800 is on the way. This past week has been sooooooo long..........as Carvers has been waiting for a truck to pick it up. Talked to them today and it was on the truck and scheduled for Monday. The truck driver also called and he wants to drop it off TOMORROW...
  24. S

    Soon to be BX1800 Owner

    Well I've been reading the posts here for about 3 weeks now and gotta say I am getting hooked. Feels like a bunch of guys out in the garage standing around the "New Toy" gruntin, drinkin beers and enjoying the stories. So here goes my story..............Well February 15/16th we had a nice bit...
 
Top