Search results

Many believe they can change what mother earth has in store for itself. The dino died from climate change way before man set foot on earth. Just saying !!!!

America, Land of the FREE ? :ROFLMAO: :ROFLMAO: :ROFLMAO:

I have no clue about other engines . But when you delete the MDS on a dodge, you must reprogram the computer to be able to deliver the correct fuel/ air ratio because the computer still wants to kill those cylinders . Not a plug and play delete for us

they should do the same with 5.7 and 6.4 dodge . Lifter failures. Just rebuilt my son's 6.4 L. and Deleted the old MDS system.

for me. the pros of trust, out weighted the cons. It cost me more up front, but lawyers won't drain the estate dry, taking their time billing for everything they can think of going through probate, and protecting assets. If they play their cards right. These two boys won't have any worries...

this is the very reason I have a trust. Trust wasn't cheap, but No probate needed

I spray generic roundup on all my fence lines. Mix it 2oz per gallon in a 30 gallon sprayer and always have good results. Grass/ weeds begin to yellow in about 3 days. I use triclopyr 4 (same as remedy) on my pastures for woody plants that come up, such as briars, etc,.

Thought we were discussing a R22 system, Not a 134 A system LOL Who knows, It may run for 10 min or 10 yrs LOL

yeah Love those ''tire kickers'' You can waste an entire day with people just wanting a price for something they may, want done next year ! and they want you out for F LMAO I sold my business several years ago. Everyone around here charges for estimates now days. Just for all those that may...

nor do companies want to do business with customers like you. Thinking we all should just make enough to get by. As I stated, I can sit at home and starve, I'll not go work my azz off and still starve.

use R22, or change it all and install R407c is what I would do

nah, I charge $80.00 for an estimate. I send out someone out, they get paid, I have fuel cost, insurance, etc, So I guess I can buy a pack of crackers. So, I'm not starving to death. After reading your post about why tradsman charges xxx . I would quote you an out of sight price because I...

Now the complaint is someone charging to give an estimate. Well, the employee must be paid to give that estimate, there is gasoline cost, vehicle cost, and you want me to ride around all day giving free estimates, with zero guarantee I'll ever land the job ? LOL If I got the job, I would always...

While I can't comment on your specific job. I will say, not many want to go into the trade these days and get dirty. They all want college degrees and work in a climate controlled environment . So, someone is going to pay us guys that are willing to do the hard work that you didn't want to do...

I use baldwin hyd filters on my hydraulic and HST . I have never had an issue with them. I started using kubota filter for oil , they are cheaper from my dealer than baldwin filters I was using. As far as hyd oil. I use TSC premium hyd fluid. Never an issue and it's compatible with kubota HST UDT

there are many homes where alum wire is run to A/C condensers. Size of alum depends on the run and the circuit / load requirements.

the red regulator at the tank is likely delivering 5 psi to the house regulator. The house regulator in turn reduces the 5 psi to 11' W.C. propane appliances operate @ 11 ''W.C. So if you're connecting that generator to your home line. You need to connect to the outlet of that second regulator...

Just an FYI ....These are Run capacitors. Not start capacitors

think he said it makes 44x48 bales

he's wanting $2500

I have seen some for sale, that had the rale wheels replaced. Not sure where they got the parts. They Must interchange with other brands

good price for this small baler ? https://www.facebook.com/groups/199681607247960/permalink/1099719447244167

I wonder just how many are living on CC debt ? When it's all said and done, I think we gonna see a lot of bankruptcies !

This is the charger I use. It has been the best charger I have ever bought. It isn't cheap but it's the largest they make. They make smaller ones ( less Joules) that cost less.

Did they dim with the old unit ? I have all LED bulbs, Alum. wire to my both A/C units and my led's don't dim when the unit/ units come on. At times, Both are on at the same time. I have a 400 amp service to my home. Alum. wire from pole to breaker box

note the single cylinder . It appears you can let one side down manually with a turn buckle

The Vermeer wr 20 is a smaller frame wheel rake is why I asked. Most of the newer ones I have seen have a much larger frame. It also uses a single cylinder to raise and lower both sides. No way to raise or lower each side individually. this isn't it but similar

looking at a WR 20 8 wheel hay rake. Seems to be in pretty good condition. $1300.00 Pros/cons Thanks

I've got a small echo gas blower (ES250) I have had for several years. Never had an issue with it. I can't comment on how well their newer products are

was in the local mom and pop grocery store Friday. They had ground beef for $2.79 per #

Saw some today for $2.79 per lb !

most times they just honor the fence I have up. If they wanted, they could go through at any time. Those barbs on that wire wouldn't phase them much if they want out. I try to keep them pretty happy with treats and fresh water. I do have a few if pressured, would run through a fence like it was...

He got caught and sent to the sale barn. I was pressuring him trying to get him to load, and he had a choice, go into the trailer, or jump the fence. Before I could do anything, he jumper the fence and was right back in the pasture. I had to go catch him again. That time he got loaded and taken...

LOL I have found a fence to a 1500# cow /bull is just a suggestion they stay where you want them. Those barbs aren't much on a thick leather hide. You pressure them and their flight or flight kicks in. They ain't gonna fight so they flight, and they'll flight right through barbed wire. I have...

I was taking it to the cattle auction when it jumped.. Trying to escape auction LOL

LOL I don't think it matters about the fence. I had one scale a 6ft fence last week. You would have thought that 600# steer was 1/2 deer the way he went over that 6' fence

If you talking about the plug he installed being water tight. That plug is what we use to test plumbing, and to just keep things out until a fixture is installed. It's a water tight rubber plug

Mine are grass on grass up until about 4 months. then, they're on grass, and fed grain twice a day. Morning and afternoon until it's their time to go. Funny how they all run up to be fed in the am and again in the pm not knowing what their fate will be. I sometimes wonder if they think I'm...

Being I'm pretty well invested in oil and energy stocks. I'm getting some of my money back each time those prices rise

Yeah, grass fed brings more here as well. No one I deal with wants strictly grass fed

I don't worry about that much around here. Most of the slaughter / process houses are locally owned. If word got out about that happening, they would close their doors due to lack of customers. There are plenty of slaughter / processors around the area

BIG bones yes ! You can look at him and tell his frame (bones) are much bigger. Even the bones in his legs look much larger than my other non Charolais steers. I won't have any more of these as I sold my Charolais cows off. He's going to cost me more, and I'll probably get less meat, due to...

Yeah, I think 450 - 500# from a 1100# steer should be about right. depending on the steer. This time I have a Charolais / Angus cross in the mix. He is larger than the others (Hereford/angus & straight Herefords) Just looking at him you can tell he has a much larger frame than the others

I don't know how it works everywhere else. But around here, the less they weight, the more $ they bring. The more they weight, the less $ they bring. So yeah, a 450# steer would probably bring that here. It all depends on what the buyers are willing to pay that day

I owned that exact tractor in yanmar version (3110). the JD 950 It has a yanmar engine. the entire tractor was build by yanmar. They're good tractors, but they are old school. no bells or whistles, but will get the job done. I'm 6'2 and the way they're built it was cramped. I kept it a few yrs...

I would love to get $2.00 per # live weight at the stock yard sales Last I sold at the stockyard brought $1.34 per # @ 735# steers

Haven't bought any in a long time. I raise my own, and also raise beef for others I take them to slaughter. I charge them $4.80 per # hanging weight

Are you talking euro and global the same, or different ?. I have always called the set up on my CX105 as being euro. I like better than any other hook up, than any other I have tried. Pull the lock back before getting on the tractor, drive to the bucket, or what ever, and never have to get back...