Search results

Results 1 to 11 of 11
  1. J

    T233, Tire pressure?

    I went through the manual, and can’t find any information on tire pressure. I have the standard R4 tires. What is it supposed to be?
  2. J

    Nimco Handle switch assemblies.

    I have a Nimco cable actuated FEL valve. The handle had, a two button switch assembly mounted. The guy I bought it from decided he didn’t like it, took it out and pitched it. I want to add a diverter valve to run a grapple, and am going to mount a couple of new switches. I can source water...
  3. J

    PowerStroke ICP sensor to monitor hydraulic pressure?

    I was looking on ebay for an electronic oil temperature gauge to monitor the hydraulic temperature. Found a manufacturer who has a gauge to monitor the fuel pressure on a Ford 7.3 power stroke using the factory ICP sensor. The gauge has a range of 0 to 4000-psi. the tractor hydraulics relief...
  4. J

    Lessons learned the stupid way

    The red dye in Dextron ATF, which my snow plow uses as hydraulic fluid, will dye translucent polyethylene. i found this out the hard way, when the hydraulics on my plow quit working because the reservoir ran dry, and I pumped air into the cylinders. I’d look at the reservoir and it was red...
  5. J

    Alternative to Third Forward for Hydraulic Powered Attachments

    I want a grapple on the rock bucket for my tiny tractor. I can get the add on kit, and mount one up to my existing bucket with no real issues. Except I don’t have a third function going forward. The after market kit, with soft hoses, is about $800. The manufacturer‘s version with hard lines...
  6. J

    TYM 233, All Metric

    So is there anything on the 233, which isn’t metric?
  7. J

    Lowering rate restrictor for a FEL

    So I ordered wheel weights for the tiny tractor, and today when they showed up, I lifted them off of the truck, with my pallet forks. They were fairly heavy, so I ran the engine speed up to have enough hydraulics to lift them. And, of course it was really happy to go down fast. so, I got...
  8. J

    Formal Training?

    I took a year of “Farm Implements and Equipment” in Junior High. I was living in semi rural Oregon, and the state had a ”Farm Implements” license you could get at 14, if you had formal training in how to operate equipments and implements safely. You could work the family farm without it. But...
  9. J

    T233, T273 Owners manual.

    Does anyone have one, or know where to get one?
  10. J

    T233, stuck in float.

    So, last night I pushed the joystick hard forward and teh loader went into float.. It is now stuck there, and I can’t figure out how to get it out of float. The bucket curl works, but the forward and backward of the stick to raise/lower aren’t there. Any Hints on how ot get it out. I have...
  11. J

    Paint Code?? Or Premix Source

    Does anyone know the paint code for the TYM red, or of a source I can buy it from premixed?