Search results

Results 1 to 33 of 33
  1. BakoJ

    Jammed 3 point now won't lift

    Right! Didn't cost me a thing except for some time. And after 2 weeks and 30 hours on the LS, I finished the landscaping in the front yard. Now to go till up the garden.
  2. BakoJ

    What did you do on or to your LS Tractor today?

    Spread 7 cu yards of gravel for my front yard xeriscape project. Then drove next door and helped the neighbors out by spreading 4 cu yards of topsoil.
  3. BakoJ

    MT573CPS first impressions

    Great stuff!
  4. BakoJ

    Jammed 3 point now won't lift

    That's correct!
  5. BakoJ

    Jammed 3 point now won't lift

    And we have a winner! Before I saw your post, I connected one of the quick connects and it didn't work. Then I connected the other after a while and it worked immediately. This connection isn't color coded, like the caps and plugs. It's a little frustrating but now I know. It's a total newb...
  6. BakoJ

    Jammed 3 point now won't lift

    Thanks for the idea. Just one rear kit. 3 point is directly off the pump. No problem with the loader. The flow control knob under the seat is halfway between fast and lock. I lifted the 3 point and turned the knob to off but there's no pressure or resistance. I've never used the 3 point before...
  7. BakoJ

    Jammed 3 point now won't lift

    Second photo
  8. BakoJ

    Jammed 3 point now won't lift

    LS MT225s I dropped my backhoe and went to attach my 3 point quick hitch. One of the hydraulic quick connect fittings came loose and jammed the 3 point control arm. I was able to loosen the quick connect, dislodge it from the controls and tighten it so it is up and out of the way. However, now...
  9. BakoJ

    Bucket Cutting edge added

    Very nice! Would you mind telling us what you piad for it?
  10. BakoJ

    Tractor quit and won't start

    Oh... And I got a new trailer! My single axle was right there on the edge of safe with the LS (FEL and backhoe removed). So I got a 7'x16', dual axle utility trailer with a 7k lb capacity.
  11. BakoJ

    Tractor quit and won't start

    Update: Looks like everything is squared away. I picked up the tractor last Thursday. Two hoses, one hydraulic and one radiator, were both leaking. Service ran the tractor for a half hour without leaks. I ran it at home for an hour and no leaks, so it looks like we're good. Service handled the...
  12. BakoJ

    The Tractor Scam 2018 Kubota Grand L4760

    I ran into one of these looking online at a JD 1025R. Same story except the tractor "was at eBay" and I was going to have to go see it there. I got a good chuckle out of that.
  13. BakoJ

    Tractor quit and won't start

    Update: Trailered the tractor to the dealer. They are going to look at the oil leak and inspect the harnesses for damage. I'm not confident the dealer's service is going to be thorough or effective. This dealership is not primarily in the business of selling tractors. I knew that going in, but I...
  14. BakoJ

    This is my last post on TBN

    I'm all for some tractor porn. [emoji23]
  15. BakoJ

    Tractor quit and won't start

    Good question. I don't see any damage to wiring harnesses. I don't feel like we overloaded anything. It was idling when it quit.
  16. BakoJ

    Tractor quit and won't start

    Since multiple photos won't seem to upload, here's photo of the fuse box location.
  17. BakoJ

    Tractor quit and won't start

    I had some time today to troubleshoot. I was able to solve my issue. I tracked down an owner's manual and checked out the electrical section. I located the fuse box behind the black, cosmetic panel on the left side. There's a catastrophic 60 amp fuse before the starter. Then there's a small fuse...
  18. BakoJ

    Tractor quit and won't start

    Yes, tried jumping it and no change. It won't even crank and the display is blank and will not light. I can't tell if this model has an ECM. It looks like it may. Does anyone know for sure?
  19. BakoJ

    Tractor quit and won't start

    Update: Checked everything I could. Every lever, switch, sensor, fluid level was checked. Battery connections were tight and showed 13.6 Volts on the multimeter. The dash display and none of the warning/idiot lights display except for the parking brake indicator does light and the parking brake...
  20. BakoJ

    Tractor quit and won't start

    The engine just stopped. It is full of brand new fuel. I'm heading out to check everything else now.
  21. BakoJ

    Tractor quit and won't start

    I haven't yet. It was getting dark (and really cold!). I will check in the morning, for sure. Headlights, tailights and flashers all work.
  22. BakoJ

    Tractor quit and won't start

    Thanks. I'll have to check that in the morning.
  23. BakoJ

    Tractor quit and won't start

    I have a MT2 25S that I've had for a couple of weeks. I'm on it most days. I spent about 2 hours on it yesterday, everything went well. I dug out a really large concrete collar with the backhoe and that was a ton of fun. Today, we were going to lift the collar with the backhoe onto the trailer...
  24. BakoJ

    Cutting edge for LS MT2 25S FEL

    Where did you order it from?
  25. BakoJ

    Cutting edge for LS MT2 25S FEL

    Thanks for the links. Both the Pirahna and EA look pretty good. Does anyone else's dealer charge 3x what I see online for LS parts? My dealer wanted over $1000 for a one sided, bolt-on edge.
  26. BakoJ

    Cutting edge for LS MT2 25S FEL

    Hi there. Has anyone here added a bolt on cutting edge to the FEL of this machine? The bucket has five bolt holes and is 54" which is smaller than anything I'm finding online or locally.
  27. BakoJ

    New guy

    Welcome
  28. BakoJ

    Howdy from Northern Utah

    It showed up! There's some stuff I need to figure out. They delivered a stationary seat bracket with it. With the backhoe, eh, isn't really useful. The other thing, and this is where I need help, the turnbuckles aren't connected and just thrown into the FEL bucket. I thought that the...
  29. BakoJ

    Looking at Bad Boy Tractors, thoughts?

    Thanks for the response. This sheds a lot of light on manufacturer support and practices. And you make a really good point about AOR that I'm not sure I considered. I know of a car dealer up in ID that will undercut anyone on price but I'm sure if I wanted to take a vehicle bought there into a...
  30. BakoJ

    Looking at Bad Boy Tractors, thoughts?

    Budds, I'm new here and a new tractor owner so no bias. I'm curious, what's the warranty process like on your end when dealing with the manufacturer? I know what it's like in the RV world (miserable, slow, intentionally misleading). Maybe your perspective in that would shed some light on how we...
  31. BakoJ

    Howdy from Northern Utah

    I'm 2 miles from Hill. We love hearing the sounds of freedom flying over! Thanks to everyone for the warm welcome. I'll add pics on Tuesday or Wednesday when I take delivery.
  32. BakoJ

    Howdy from Northern Utah

    Hello to all. I've recently moved to Northern Utah with an acre of property at home. After budgeting equipment rental for our workshop build along with clean up (it's a fixer upper home/ property) and completely new landscaping, we decided to buy a new tractor. We are in the market for some...
 
Top