Search results

Results 1 to 50 of 199
  1. C

    Trying to identify model tractor

    Yanmar Factory modification. From A 20yr. UTDA Yanmar dealer. Not going to be listed which I knew that. Could just be a Customer modification. Actual Mod.?
  2. C

    Painting YM-146 Clearcoat or no clearcoat any advice

    Fredricks equipment has painted a few Yanmars. I'm sure they have and use the best there is. I think I'd check with them.
  3. C

    Trying to identify model tractor

    Just show me one page that shows the meaning of the A and dash"-A" for my tractor. Of the Ser. Id.'s. 1 page out of how many manuels for a YM2000 or a YM240 can't be that hard. You can't down load a Pg. from that site? "You should of seen that thread over the past year. :) It has 18,000 views...
  4. C

    Trying to identify model tractor

    Post it? Your on here. Never seen any of those Manuals. You forgot a BD,................:rolleyes:
  5. C

    Trying to identify model tractor

    My YM2000 to the day have a answer for the A's in my Id.plate #'s. My Eng. Id. 2TR20A-A and on my Trans # YM2000A 15089 Have a ym2000 Manual and a 240/195 and neither has a reason for it. Or anyone for that matter 693188
  6. C

    Yanmar 1303 Tiller

    We had to go into a back wharehouse to dig it out. Spalding tractor co. told me I needed to go get it Wouldn't last long. Been quite a few Yrs. but the bearing did come up. In dirt like most all US. gardens the dry wears the bearing. Easy to grease up only takes a Min. or Two..... 600608
  7. C

    Yanmar 1303 Tiller

    1303 Last one Fredricks had Yrs. ago. On a YM2000. Worked fantastic!! My mother sure like it after having to deal with a walk behind sears. Tilled 6-8" deep if that. In the pic it's set as low as it will go. And the Tractor handled it with ease. That is the shortest the top link gets. Set the...
  8. C

    Replacing water pump - YM2000 D

    Yup! Looks like 1 YM240 that was painted red........ yanmar ym240 tractor - Bing images
  9. C

    ATl. speedway.

    Big boy toys here!! Knew of Yanmar from the 70's and my first Yanmar tractor came from just down the street from the Track.. Spalding. Heard the story's for Yrs. on rain and even Snow delays. Snowed in one Yr. 2 days. My father retired from the Big Blue Oval. Seeing that on the car was a HUGE...
  10. C

    ATl. speedway.

    It's good to be Red in Ga. Again!! Check this out......... Yanmar America Reignites Partnership with Front Row Motorsports|2022|News|YANMAR USA My favorite no doubt.
  11. C

    Painting YM-146 Clearcoat or no clearcoat any advice

    I tried Valve springs but they moved way to much. For me so it had to actually stiffen it up. Neck Inj. I was going after the back seat height also. Leaned way to far back. Moved my seat mounts away from the dash and not the first compaint since. 15Yrs.. The springs I used was stronger no doubt...
  12. C

    Replacing water pump - YM2000 D

    240's Grn. and the YM2000 is Red :)
  13. C

    2210 D rebuild

    Fredricks show CS-2000 195,240,1600,1700,1900,2000,2210 which more Eng's may use it now. I'm sure they have a few.
  14. C

    Replacing water pump - YM2000 D

    The 1700 conv. was the first for me but there is Several now over the Decades. Fredricks show WP-4201 169,180,186,187,220,226,250,276,1301,1401.1502,1510,1601,1602,1610,1702,1720,220.2202,22202301,2310,2402,2420 They have a 1700 Kit also WPC-1700
  15. C

    Replacing water pump - YM2000 D

    YM1700 WATER PUMP CONVERSION KIT
  16. C

    New? Yanmar dealer in East Texas

    I'm going to have a upgrade my small Ym2000. 15Yrs. and still going. Yanmar is local so no doubt #1 on my list. Not sure just how much Tractor I'm going to need yet. FEL. BH. 4wd. no doubt. Way to many trees and then the stumps. Dealing with this Heat in Ga. Cab/Ac. may be really nice...
  17. C

    YM1600

    Sent him a Maint. Manual and from what I could tell from parts everything is pretty much the same 1500-2000. Except Cyl. size. I believe the 1600 is about the rarest model. Not much of nothing ever shows on the YM1600.
  18. C

    Differential lock doesn't work?

    Haven't been inside mine to look at it. But it seems there was "alot" of pressure on it to cut that grove. For awhile. Well done!!..... And Welcome
  19. C

    When to worry about black smoke?

    Just Greased mine I'm sure 7. With most on the Front and 2 on the Pedals. I was on Yard patrol Yesterday.
  20. C

    Issues? Yanmar built John Deere 755

    I see my favorite Fram filter is on there.
  21. C

    Replacment alternator

    Rebuild the one you have. I finally had to get mine rebuilt for a YM2000 same starter in 6/2011 for 75.00$. Not the first complaint. US. JD. 240 also same starter. Not much to them. The shop mentioned they could see were I was in the brushes of mine. It quit and I added an extra 3yrs use out...
  22. C

    Issues? Yanmar built John Deere 755

    Sae20 Hyd. fluid is what is says. I'm not worried much about it. My guess the 303 in it now is clean. I'm telling you it was Whale oil that a came out of it. It was Nasty!! They didn't ban it in the US. until 1975. My YM2000 production in Japan was in 75-77 "Wikipedia" In the United States...
  23. C

    Issues? Yanmar built John Deere 755

    Yeah I found that out the local fish Mkt. told me!! Wanted it Org. as I could you know..:rolleyes: I filled it with TS.303 back then and now I'm waiting for the Tac. to roll to change it. In the 900Hrs since I done it. I'm using this to change it. TS. 746955
  24. C

    Issues? Yanmar built John Deere 755

    This one was super milkey. I had to use a cloths hanger to clean the Pan. Easier for me being just a gear Trans. no doubt. Had to replace the Screen. Someone put the Ghetto rig on the one in it. Welding and the brass screw is what it looked like replacing the Old screen. It was bent up but was...
  25. C

    Yanmar tiller ID help

    Very few made it over here. I When I was looking to purchase a tiller I found that out. 2009-2010 In Ga. we still had the big VN. importers. Spalding told me I better go get this one. Last one Fredricks had. Back then they would show up at the dealers. But they was hard to come bye. There was a...
  26. C

    Yanmar tiller ID help

    Figured that a Part # or Tine# would work!! I came up with a RS1200.
  27. C

    Yanmar tiller ID help

    This rear wheel Mount looks to be the same. RS1200 is what they call it. Had to make mounting brackets for a 3pt. like you QH...
  28. C

    Yanmar tiller ID help

    Looking at a few old Pics. 48.25" is to small for a RS1400. My rear tires being 49' longest point shows that. And here another pic. of the 1400. The tine total width is in the mid to upper 50" looking at it. Here is a 1300 and the way the rear wheel mount looks different. no doubt about that...
  29. C

    Yanmar tiller ID help

    No hole in my RS 1400 I can recall. This pic I had out had me thinking that my tiller was bigger that 48". The Tines was my guess. My Rear tires are 49" and you can clearly see the tiller is bigger. Or the Tine width is with No tire tracks. You look to be leaning back as if the Top link needs to...
  30. C

    Yanmar tiller ID help

    In my last reply RS-1400 from Fredricks equipment. They told me the rear wheels I wouldn't need. Spalding also Which was true and I better go get it. When they sent the correct Pto. shaft which I had to shorten the Org.. I told them to forget about the wheels. Which they was right of course. If...
  31. C

    Yanmar tiller ID help

    No gauge wheels and never a need for my mothers old garden. She said planting was effortless. The pic. is as low as the 3Pt. would go down. Really deep.... 1st of the season pass. 640243
  32. C

    Yanmar YM1600

    Bet it's in Japanese. Winston let us know that!!!
  33. C

    Yanmar YM1600

    I just looked at my Parts which show all the Model that it's used for. The 1600 though the 2000 Uses the same Clutch, Same Pressure Plate, Same bearings Etc. You should be able to use your YM2000 manual. Everything in parts are the same. PTO. and Trans. If you use Fredricks for parts it will...
  34. C

    New to Yanmar tractors and need some assistance

    I've been in Ga. since the Mid 70's. and the Yanmar debacle has been interesting. Now Spalding Spalding Tractor and Equipment is the only one selling Refurbished Yanmar tractors here I'm pretty sure. Yanmar itself is in Adairsville Ga. and a Dealer sells "New" Yanmars in Athens. Fredricks has...
  35. C

    Yanmar FX32--problem with new engine oil filter

    Turn your Jap translator is my guess...........
  36. C

    Yanmar FX32--problem with new engine oil filter

    https://www.oilfilter-crossreference.com/convert/JOHN-DEERE/T113883 https://www.oilfilter-crossreference.com/convert/JOHN-DEERE/CH10467 Replacement for a Tractor from your posting. Look at the pics and how many times do you see Fram for a JD. You think!!!!!!!
  37. C

    Yanmar FX32--problem with new engine oil filter

    https://bestreviews.com/automotive/oil-fluids/best-oil-filters
  38. C

    Yanmar FX32--problem with new engine oil filter

    The dealer was Fredricks supplied Spalding who still sells Yanmar refurbs. to the day. 2 yanmars from him a 2500 and a 2000. I never heard the first complaint about them. Or have a problem with one for that matter. I wasn't paying 4.99$ a filter. OF-1334. in 2009 when I was there. They was...
  39. C

    Yanmar FX32--problem with new engine oil filter

    Fredricks supplied dealer gave me the Fram # for a YM2000. Been using them for over 10Yrs without the first complaint. You could see the Orange filter on a CL. add which he gladly gave me the #. PH3593 A. Not a new Refurb. but a used Yanmar. I was going through them quick cleaning it up...
  40. C

    New to Yanmar tractors and need some assistance

    PVC. Freese plugs. been on 14Yrs.. Soften the ride no doubt and Cheap!!! Head and neck injury's. 730470
  41. C

    Small headbolt torque

    At least it's not in japanese. Close though.
  42. C

    New to Yanmar tractors and need some assistance

    Boy the UTDA roll over patrol is on it before I could finish typing
  43. C

    New to Yanmar tractors and need some assistance

    Seen that Tractor listed on CL. I believe it was. I thought it was odd the fenders was missing. I'm next door in Walton. Asking price seemed fair I believe. How the ROP. patrol hasn't been all over this one. Org. rice patty unit for me so I don't have them. To many trees 8 acres worth so I left...
  44. C

    New to Yanmar tractors and need some assistance

    On the 3point You have a problem. The Hyd. piston is pushed in. So the handle is working, Pull it back pushes the piston in "lift". No lift fluid!! Strainer or the Hyd, pump. Are you that low on fluid? Doubtful!! Shear the pin on the pump is my guess. My strainer was so super nasty it was just...
  45. C

    Manuals

    1600 manuel probably won't show up. But the YM 1700 Gear drive is pretty much the same tractor. 1Hp. difference which is basicly the same 2cyl.. How they gained the 1Hp.?
  46. C

    Small headbolt torque

    0.9L 3Cyl. 3 Assist bolts 20 Ft. Lbs.
  47. C

    Correct hydraulic oil for Yanmar FX32?

    Not a universal Hyd. fluid but meets all SAE20. Was it actually whale oil that I changed?. It very well could have been. Super Nasty............... and it did stink come to think about it.
  48. C

    Correct hydraulic oil for Yanmar FX32?

    I won't hit 900 hrs. on my Tac until maybe end of this Yr.. I changed the Hyd. around 015-025 Hrs. which was what was showing when I bought it. The Hyd. fluid was super nasty!! looked like Crisco oil came out from the bottom of the pan. No doubt decades since it's was changed. Thick and White...
  49. C

    Anybody seen cracked front wheels?

    Repainted them in 2009. Fredricks paint that and fix a flat. Valve stem leak which fixed that. I lost 2 Lug Bolts over the Yrs.. Just a Standard size bolt with a lock nut took care of that. Wheel Bearing just last Yr.. 1 disintegrated. 726438
  50. C

    Anybody seen cracked front wheels?

    It happens!! My 2wd. Ym2000 done it. The design is for rice patties. JMO.. Both fronts the lug nuts came loose and looked as though there may have been cracks but it was just the paint. Extra thick. Lock washers on all but I use a drop of Locktight to keep it from happening yet 1 lug did come...
 
Top