Search results

Check for cracked manifold if plastic where the carb bolts up. Had this issue with a tiller. replaced the manifold. Small plastic thing and all is well.

Highly recommend Brave Browser and search engine. Basically Chrome without the trackers

Idiocracy and Darwinism all in one video. Classic you get what you pay for!!

Yeager Pro has a whole series on trapping Hogs on YTube. Check it out pretty awesome. Also some good videos of folks hunting them at night with thermal scopes "Ultimate Night Vision" and wearing them out. Love to hear them squeal when they are hit!!!

It's not illegal to talk about illegal things.

Download the brave browser as well. Awesome based off of Chrome without all the trackers. Secure, Fast & Private Web Browser with Adblocker | Brave Browser Not Spam. You neeed to get away from Google and Apple trust me. They sell your info and track everything you do.

Don't use google as a search engine. Use Brave https://search.brave.com/search?q=Brave&source=desktop . Privacy and no suppressed results. Google search sucks

All about E-mail. Suggest you watch!!!!!

Yes, a properly adjusted slip clutch may mitigate the shock. I would not trust the Youtubers like Tractor time who are sponsored and make multiple six figure incomes from ytube advertising various implements. They can afford to buy a new 1024 or whatever when its fd up but the average user like...

Ok Walnut, nobody said it was illegal to talk about D. You are an example of why I said what I said. People like you will f it up for the rest of us. Just go away troll!!!! I am just saying the PC police are out and they will do anything to discredit us. Go Greta. (NOT) I wish I could express...

DPF has pressue sensors, when the back pressure reaches a certain point it triggers a REGEN. Most tuners turn this off so no worries about excess heat, if you have a certain kind of tune that turns this function off, you will plug up the DPF pretty quick if it is still installed. Anyway...

I agree, get a free universal e-mail account, set up forwarding in old mail, and go from. I highly recommend you not use Gmail or Outlook/Hotmail if you value your privacy. They both send to spam folder legitimate e-mail from some of my subscribed conservative sites for no reason. I recommend...

One thing comes to mind coming from a veteran Helicopter Mechanic/Crew Chief. Sudden stoppage. I have witnessed what happens to gearboxes when operating at full RPM and encounter a brief interruption as in the case of a turbine engine compressor stall. Think bang, bang at 100 percent RPM...

They are already here. Fully autonomous capable. Looks ok, but I agree we are not there yet and the grid will not be able to support mass use. https://www.monarchtractor.com/

Noticed a lot of the local tweakers around this area have no exhaust systems, I suspect they sell their CATS to get a quick "fix".

Yes Cathey: I know now. But the basic UCC search doesn't list the collateral only the person has a lien on file. How many people are going to provide names etc when you first contact them. If they have a good price They will sell to the first person who shows up with the cash.

OP why are you worrying. You folks don't give a s about what's happening. Better go solar!!!!! or grow some Balls like the WW2 Vets!!!!

Opened the shed and found a few today. They ignored the green Tom Cat Bait. My Pointer (dog) caught one, Another Rat Is still on the loose. Fired up the Predator 3500. Shut the doors and let her run inside while I mowed my pasture. One hour of Carbon Monoxide (CO) should do the trick. :)

Here's another tragic tree-cutting accident from 2014. Man flipped out of bucket when limb hits boom. https://www.al.com/news/huntsville/2014/09/tree_trimmer_falls_60_feet_to.html

Bill: Please explain. Do you have experience with this product or are you just making a statement? If making a statement, I agree. I have sanded underside of the deck and applied Truck bed liner. Worked great for the stamped 54 inch deck. The Fabricated Cub deck not so much. Just trying to...

Instead of starting a new thread, I am going to revive this one. Anyway, after spending quite some time scraping off the accumulated dirt and clumped up grass from under my 50-inch and 54-inch Mower decks. (at least three times a season) I was thinking about trying out this EZ-Slide Graphite...

I recommend Brave Browser No trackers chrome-based without all the tracking stuff. Great search engine too (Brave) Secure, Fast & Private Web Browser with Adblocker | Brave Browser

Not a lot of snakes around here anymore. Stupid rednecks that kill anything that moves. Beneficial or not.

Yea heat of the moment. Definitly not OSHA approved. BTW no pets or livestock, people or petro chemicals inside or anything that could spontaneously combust. All steel building with concrete floor.

Might want to check Clist Marketplace etc. I see people selling used telephone poles all of the time. Heres an example. https://pittsburgh.craigslist.org/grd/d/butler-telephone-pole/7489743668.html

Grease gun, gravity. Done ;)

Another idea to loosen it up is to soak it down with strong apple cider vinegar. I had an old rusty pair of pliers. Soaked in vinegar for a week and all of the rust disappeared. Not sure if it will work with the PB Blaster though.

Gravity is your friend. If you have the equipment. sling it upside down and tap on it. I would at least try that. Come-Alongs are inexpensive but will get the job done. Even better if you have a loader or other lifting equipment. Like others have said. Sounds like a hold my beer Kodak moment. :)

Yes, I had one over the winter. Caught one. Seems like the little critters have come back with a vengance. Time to set it back up and also use the glue traps as suggested by Diggin-it. Anyway, original post was a quick reaction by me when I saw what may have been a Rat. Bigger than a mouse. I...

Agree, I need to seal the roll-up door. The concrete crew didn't get it level Seal has a gap. The shed is pretty sealed except for the eaves. I get frustrated because I see where they are chewing on the bait and yet I see one or two scurry around inside from time to time. I keep my Mowers...

Just wondering if anyone has used Carbon Monoxide poisoning to get rid of pests in an enclosed structure. I have a 20x20 enclosed garage with a concrete floor, roll-up door on the south 40 of my property that is used to store supplies, Lawn mowers, etc, and other stuff that I do not want rodents...

I have a Pirana Bolt on Tooth bar for my 60-inch bucket. Does a pretty good job at tearing off small saplings and hedges and then back dragging to fill. It may take a while, but it is satisfying seat time on your tractor. Just a thought. Here is a pretty good demo and comparison video.

I graded my 500 Ft gravel driveway that had minor ruts from having Concrete and Tri-Axle loads of dirt brought in. Took me two or three passes. No more ruts. I also have a 5ft Box Blade and 7 Ft Landscape Rake with caster wheels. I have to admit the Plane was much easier to use. I plan to use it...

I dont have the exact weight but the rep said about 100 LBS per foot. Mine is a 5 footer, so about 500 LBS or so. I can definitly tell when I pick it up with my 3PT.

I think that most people, including me, get excited when they find a "good deal" and forgo the due diligence that they would normally use. As everyone can attest, things that are for sale at a decent price go fast, and a lot of times it's a seller's market. If you don't buy it, the next person...

Just bought a 60-inch land plane today from the manufacturer here in Northern Alabama. Not sure if I can say the name since they are not a sponsor, (Lowery) but it is American-made. Not sure about the steel. Anyway, it is awesome. Pics to follow if allowed. Offloaded from my Ram 2500 using my...

Ok everyone thinks Kubota is the Cats Meow. Watch this. Warren is an awesome heavy equipment mech who works his A off. One-man show. Can fix anything. I wish he lived around me. I would volunteer to help him. He is not a Green Fan or anything. He tells the truth. Kubota is not as good as most...

Try this,

Wouldnt aerating the drain field allow more rainwater to soak in and possibly saturating your drain field?

Pretty good post concerning purchasing used Tractors. Should also apply to anything without a Title. No titles for Boats, Trailers, ATVs UTVs, etc in Alabama. Buyer beware. I asked my credit union if they could do a search for liens when financing used equipment and she said no...

Not sure what engines the 175 has but here is a pretty good video of how to solve Kawasaki FR600 sticking choke issues. Recommend fast forward to minute 4:04 through the beginning stupid antics. I would check for that and also check for air leaks. Brake cleaner around Carb Base. Air leaks will...

If you are into metal fabrication and building your own projects I highly recommend you check out this YouTube channel. He is a retired Nuclear Engineer who has made a few great projects from Old, (PRE MTD Cub Hydro units) Project including a Mini Motor Grader, Mini 6 wheel dump, and now he is...

Have you tried Fredricks Outdoor in Hartselle AL. They have a huge inventory of Gray Market Yanmars and may be able to locate you one. https://www.fredricksoutdoor.com/default.asp?page=xPreOwnedInventory#page=xPreOwnedInventory&vt=tractor

Over priced golf cart. No Thanks!!!

It has nothing to do with MTD. It is a rebranded Yanmar Japanese tractor. Actually a updated John Deere 790. Don't comment if you do not have info that will contribute to this thread!!!!!

That's plausible. Hit a big root once with a Box Blade scarifier on an Old Ford Jubile. Stopped me dead in my tracks. Was going about 4 MPH.

While perusing sold auction prices for Cub/Yanmars ran across this listing. Sold back on Nov 2021 for $3300 then again in Mar 2022 for $3990.00. The tractor is broken at the rear of the Transmission. Trying to figure out what could have caused this? Fell off a trailer? Can't see overloading the...

Yes, when Deere stopped having Yanmar build the 790s, They made a deal with Cub Cadet. This began in 2008 for the EX3200 and EX2900 From what I have read it is the same tractor, with mostly updated grille, headlights, and hood from what I can tell. Mine is Hydrostat 3 speeds. I cross-reference...

I was looking at my ROPS attachment point. Three large bolts on each side mount to the frame. Not to hard to reach with a breaker bar and socket. I was looking at a Pic of a 790 and looks the same. Here is the PN for the ROPS, good luck finding one. Maybe a Yanmar dealer can get you one. Not...

My sig tractor is a slightly modified JD 790. It has a folding ROPS. Not sure if the mounts are the same, but maybe you can change yours out or if not too much trouble, remove for transport. Battery impacts are awesome and fast. :)