Search results

Results 1 to 18 of 18
  1. quarencia

    Solenoid Valve Schematics - what does this mean?

    Does anyone know what this schematic means and can you explain it to me? I'm adding a couple of proportional solenoid valves to the Bota and am having some trouble understanding this valve position schematic. I've never seen transition or crossover blocks showing metered flow paths during valve...
  2. quarencia

    Loader B3200 Loader mounting bolt torque

    Does anyone know the correct torque for the various bolts used on the LA504 loader frame? A snap shot of the relevant pages from owners manual would be great. Why? I'm the proud new owner of a B3200 with a loader, front snow blower, mmm, and pallet forks. It's a 2014 with only 61 hours on it...
  3. quarencia

    WSM Wiring Diagram wire size

    Does anybody know if the number next to the wire color on the wiring diagram in the WSM is the wire size? If it is, what is the correct way to interpret it? Attached is an example from the B3200 WSM for the ignition switch. The two wires with 2 next to the color are 0.101 inch diameter and...
  4. quarencia

    B3200 Engine Torque?

    Looking at a used B3200 and wanted to know if anyone knows/has/can find the rated engine torque for the B3200? I'm trying to decide if the extra vibration of the 4 cyl V1505 is worth the power or if I should keep looking for a used B2650. Would probably prefer the B2650, but in the used...
  5. quarencia

    Pour foundation without forms

    Accidentally posted this in regional forum, but meant to post here, so I reposted. Anybody ever poured a foundation without forms? Not just the footing. The entire footing and wall without forms. Free pour directly in the trench. Getting ready to build small barn (20x24) for equipment storage...
  6. quarencia

    Snow 2750 snow blower shaft length

    Just picked up a used bx2750 snowblower. The sub frame is set up for a bx25 with the longer drive line shaft (pn 70060-02728) mounted in the sub frame bearings. I need the shorter shaft (pn 70001-00772) to mount this on my bx2230, so the question is... Is it possible to cut the spline end of...
  7. quarencia

    Gravel Base for Asphalt

    Sorry for the long read. I'm having some trouble with my contractor and thought I'd seek some advice. I'm getting my driveway repaved. Part of it had to be removed as it was originally laid over the grass with no base (this was done before I owned the house). Got four quotes and all agreed...
  8. quarencia

    BX blew front tire! Better tire?

    Put the FEL back on the other day and started driving away and right front went flat. Found a 3/4" cut in the middle of tread. Searched, but couldn't find the culprit. The nearest Kubota dealer doesn't carry tires!!! They sent me to a local (to them) tire shop who has to order the stock OTR...
  9. quarencia

    Small Cylinder Search

    I'm looking to add a separate hydraulic lift for my mmm. Not really required, but would be a nice convenience. I need a small cylinder with a 3/4 to 1 inch bore and around 2.5 to 3 inch stroke. I can't find this as a standard item anywhere. Custom built will cost too much for a convenience...
  10. quarencia

    Why is it so big on a BX?

    Getting ready for spring today. Had to clean out the spring/detent cups on the bottom of the BX LA211 loader valve. AGAIN! :mad: While I had the cover off, I was again struck by the excessive size of the Husco valve on this loader (I have valve that stays with tractor). This thing is huge for...
  11. quarencia

    Grading BX 60" mmm Gator Blade 411

    I read many posts looking for Gator blade info on BX 60" mmm and the trail always confuses me and is never definitive. I've pieced all the Gator blade info together as best I can to post in one place. First, not all Gator blades are equal. They come in standard, Mulcher, Hi-Lift, and Mulcher...
  12. quarencia

    Pump wiring for fuel station

    I started yet another project today. That brings the total active projects to just under the size of the national debt! But this one is different. It is designed to make finishing the other projects easier. I'm putting a diesel pump on one of my hho tanks to fuel the tractor. I'm REALLY...
  13. quarencia

    Where's that ballast thread?

    A long time ago before I was a TBN member, I read a TBN post where someone had asked for everyone to input ideas and pictures from the ballast boxes they had created. It was the most complete thread I've ever found on the subject! Period. Trouble is, I only ever got to read it once. Have...
  14. quarencia

    Old "Vintage" Ariens Stuff

    Last fall I bought an Ariens Snow Blower that came with a Gard-N-Vac yard vacuum attachment and a shredder/mulcher attachment. They were on the side of the road with a sign for $20. I can't find any info on these attachments. Both have Ariens tags with Serial numbers, but no model numbers...
  15. quarencia

    Deere 318/400 Hydraulic pressure

    Anybody know the working pressure and flow rate for Deere 318 and 400 hydraulic valves? I've been looking for a hydraulic valve for some projects (Grapple & boom mower) and have seen many Deere 318 and 400 valves on eBay. They're nice and small and have power beyond port. And most important...
  16. quarencia

    Hydraulic pump loose!?

    Was routing wires for work lights on top of ROPS and noticed that the lower bolt on the hydraulic pump was missing. Found the bolt on the garage floor earlier this summer but never could figure out where it came from. Guess I know now! That means it's been running this way for several months...
  17. quarencia

    BX Temp Sender

    Like many BX owners, I have difficulty getting tractor to warm up in cold weather. Weather is warmer now and still doesn't appear to get very warm. I've checked, tested, changed, blessed and liberally applied voodoo black magic to the thermostat. No luck. It looks good. Now to further...
  18. quarencia

    BX MMM Top Lock questions

    I bought a used 2230 last fall and really like the tractor. I've only had one problem so far. If I adjust the mmm to level, I can't lock it in the Top position with the height adjustment. I spent some time on my back under the tractor and discovered the problem, and came to an unfortunate...
 
Top