Search results

Here's the recipe. Berried Delight Combine: 2 cups graham cracker crumbs 2/3 cup sugar 1/2 cup melted butter/margarine Press firmly into bottom of 13 x 9 pan and chill for a couple of hours Beat until smooth: 1 (8 oz) pkg softened cream cheese ¼ cup sugar 2 tablespoons milk Fold...

If we have rain coming in, I've been using ours for hauling branches over to the outdoor fireplace, keeps the house property trails clean. I'm still hauling firewood out with our RTV, once I get the next two face cord stacked, we'll have 60 face cord up. If I put more work in, I can eat more...

I picked up a tread tester and then bought what I needed for our 4540.

This is an older thread but I was wondering if any of these members can help. https://www.tractorbynet.com/forums/threads/2810-hydraulic-level.254671/

Did you test the battery with a load tester? I had a battery on our Rhino Yamaha test fine but under load it was bad.

https://4mymahindra.com/products/3rd-function-kit-vkmh2638cl

Did you try for any help on this thread? https://www.tractorbynet.com/forums/threads/2538-2638-wiring-diagram-and-3rd-function.419584/

Our area is only a little over 1000 feet, no problems here but adding 8000 feet, I'm not sure if it would or not.

https://www.paladinattachments.com/sites/default/files/prod_lit/FFC%20Snow%20Removal.pdf

This is the brand I have on our 4540, I'll get the model number for tomorrow night. I haven't had any problems with it yet. https://www.paladinattachments.com/products/ffc-ss-snow-blade-114

I meant this thread. https://www.tractorbynet.com/forums/threads/mahindra-1533-hst-wont-start-relay-issue.444268/

Check this thread out, hopefully they can help. https://www.tractorbynet.com/forums/threads/what-is-this-sound.443182/

Todays work.

I've been digging some stumps up in different areas before the snow falls, makes plowing these areas easier.

I've been digging some stumps up in different areas before the snow falls, makes plowing these areas easier.

The company our dealer used was Paladin, I believe ours is a series 114 but I'll check that tomorrow and get some measurements for you. https://www.paladinattachments.com/products/ffc-ss-snow-blade-114

I finished splitting and stacking the two face cord of Beech but before that I cleaned the filters and checked the oil in the MTD 20 ton. Pictures 1894 & 1895 are what's left of the Beech pile and the Maple.

I split and stacked four loads of Beech today, picture 1884 & 85 is what's left of the Beech pile. I'm hoping for two face cord so we'll see how much we have after I'm done. It was a great day for it, not many bugs at all. When I came in it was 60 degrees.

I went down it again today with the rhino on my way to get more beech firewood, there are a few spots that need fill before I go up it. I have some rotten basswood that has been down for years that I'll put in the lowest spots and then add chips and pine needles, that will work for a short...

I've been working with the Rhino making some trails wide enough for the Kubota, I'll be opening up this trail off one of our highest hills. If I have the RTV in low and in four wheel drive, do you think I can walk up it with a load of wood or a splitter? I had a person tell me some of the grade...

Sorry for not getting on here sooner, we added two lights up front on the top of the cab and one on the back, we also added the screen for protection of the back window. I don't have the Boss V-Plow model number inside but I see you went with something else. We did go with the ATV tires and...

We put in two loads of firewood this morning, the first load was all Yellow Birch and the second (pictured) was mostly Cherry.

We have a sander for the Mahindra 4540 3 point, I'm looking for a company that makes a sander to pull behind a UTV or RTV, if something happened to me this would make it easy for the wife. Thanks

Here are some pics of our 3rd function kit, I'll get the name off it tomorrow.

We're looking at the Kubota RTV - X1100C, we live here in the Foothills of the Adirondacks with some nice hills. We have a 2007 Rhino Special Edition 450 with just over 7500 working miles on it and never had any problems getting up the hills, how do you think the RTV - X1100C will do? Also what...

We have a 2016 Mahindra 4540 with a backhoe with just over 1000 hours on it, I was just wondering what the trade in value would be if we were looking to buy the 2638 with Cab with A/C and heat. I had a worker from the local Mahindra dealer tell me our 4540 is in excellent shape, it's never been...

I'm thinking about trading in our 2016 4540 with the backhoe for a Mahindra HST, I haven't had any problems with the 4540 but it would be much easier for the wife driving an HST, we have 933 hours on it most of that has been plowing the driveway and trails. How is the 2638 or any other Mahindra...

I'm thinking about trading in our 2016 4540 with the backhoe for a Mahindra HST, I haven't had any problems with the 4540 but it would be much easier for the wife driving an HST, we have 933 hours on it most of that has been plowing the driveway and trails. How is the 2638 or any other Mahindra...

The picture is from our 4540, it looks like yours is different.

All the zerks I sized with a Grease Fitting Thread Tester, Type Gage from Grainger were a Brass Metric M8 X 1.25 into a steel pin, Grainger has the same size zerk but in a zinc plated steel. I ordered some so I could have extra since my dealer didn't have the size in stock, the threads are the...

We hit 80 again today but the clouds moved in so it wasn't that bad. I took two loads (one pictured) to the wood dump in the utility trailer After I came back from the wood dump, I put five gallons of diesel in the 4540 and took three loads of chips to the trail I've been working on. I also...

Yesterday I moved around 11 or 12 loads of chips to what was a low area in the trail, this should make this part of the trail much better when it's wet or just when going for a ride.

I bucked up two of the ash trees that are in the gully and then pulled one out with the 4540 that's down further from the first couple of pics. I did move some of the rounds from pic 9103 to the splitter area.

There's a spot you can set the opening for the feeder gate so all you need to do is push the handle down from the tractor seat to the pin in the set location. If you have a cab then the handle might need to cut down.

The Sundown 180 is all hooked up, I had the sand/salt shield down all the way but the next time I'll raise it so it will pretty much do the width of the driveway. It beats standing on the ice throwing sand on the driveway. Just a few pictures of the 180 and the little bit I sanded. We almost...

The Sundown 180 is all hooked up, I had the sand/salt shield down all the way but the next time I'll raise it so it will pretty much do the width of the driveway. It beats standing on the ice throwing sand on the driveway. Just a few pictures of the 180 and the little bit I sanded.

We're looking for a sander/spreader for our tractor, the 3 pt is 31 hp. Something with a poly hopper/tub or something we can sand the driveway that we can pull behind the rhino.

I moved a bunch of snow with the 4540 yesterday, I'll finish a few areas that need plowing tomorrow or Wednesday.

After it stopped raining this afternoon, I removed the slush from our driveway. In pictures 2083 & 84 we have a few small trees down across the brook where the ice did damage last winter. Off the bank on our side, the water is up to my waist so if I can't pull them out from our side then I call...

We received 5-6 inches of wet heavy snow overnight so I did our driveway and the neighbors too. After some lunch, I did some roof raking and plowing some trails around the house (not pictured) so the dog would have a place we could walk it. The power is starting to go on and off.

This is our first tractor (2016, 4540) with the backhoe,forks and a plow with the third function kit, it's been a good tractor with no problems with just over 641 hours on it. Very early on it had a code update they did here and they also added a inline restrictor coming out of the top of...

I changed the direction of the drain for the gutter, the water should run across the driveway into the woods instead of at the new garage and to the left. I hand dug everything and then got some sand with the 4540 to fill the trench halfway up where the drain was. We also put some wood with...

I'm looking to buy a snow deflector for the top of our snowplow, what's everyone using and where is the best place to buy one?

We have a 4540 that we bought new in 2016, it wasn't that the temp gauge was bad, they had to put in a inline restrictor coming out of the radiator which brought the temp up. Before the inline restrictor it was like the temp gauge was broke but it just wasn't getting warm enough for a reading...

I did some digging later this afternoon and then brought it near the area we'll be using it.

The 4540 went in for it's 500 hour checkup (598 on it when it went in) so I had them change all the fluids,oil and filters, everything was fine. This winter the 4540 will be inside a new 28 x 36 garage which should be finished before the end of August....depending on the weather. The pad and...

I pulled the stump out of the hole today and then put the pallet forks on to move it to the stump pile. I did dig three smaller stumps but the batteries were dead. The three smaller stumps I took out today opened up an area so I can dig a bigger stump out tomorrow depending on the weather. The...

I moved some chips with the 4540 to a trail I started working on last year, I moved 5-6 loads today.

I did the below yesterday, today I cleaned some zerks on the backhoe that weren't excepting grease and then greased it. I'm thinking that I pulled 5-7 stumps today, nothing huge but the last stump picture took some time.I did get about four bucket loads of sand to help fill a couple of holes...

We have one on our Mahindra 4540, this is our second winter with it and I really like it. I haven't bent anything yet but I don't go hard into the banks already there. I use it on our gravel driveway and on some trails in the woods. We can change the angle of the plow from the seat, we almost...