Search results

Results 1 to 17 of 17
  1. J

    B2710 3 PH not raising

    Guys: I am having a problem with my B2710: Sunday I connected my KK bush hog to my 3 PH and lifted it off it's storage pallet. I moved it to the driveway and move the 3 PH position control valve from full up to full down, like a knucklehead. The hog came crashing down onto the driveway, and...
  2. J

    B2710 3 PH wont raise

    Guys: I am having aproblem with my B2710: Sunday I connected my KK bush hog to my 3 PH and lifted it off it's storage pallet. I moved it to the driveway and move the 3 PH position control valve from full up to full down, like a knucklehead. The hog came crashing down onto the driveway, and...
  3. J

    What Saratoga NY looks like after the storm...

    OK Guys attached is what I woke up to this morning. Easily over 2 feet. But the 2710 and I are up to the task here are the before pictures, we will see what the after looks like...
  4. J

    Soleniod controlled Water

    Guys: Here is the situation. I have a 1 inch plastic pipe going to the barn. I want to do the following: Hot water, Cold water and Warm water. I have the hot and cold lines in the Mobile home, and a 4 pair of wire between the barn and the Mobile home. My problem is I need a solenoid operated...
  5. J

    Hydraulic Chute Rotator

    Since winter is upon us here in the Northeast with a vengeance, I thought I would add a link to my Hydraulic chute rotator project. I created this last year and it works very well. So far I have not had any problems with the motor that I bought from Northern Hydraulics. It remains more than...
  6. J

    What kind of spider ?

    Guys: Hanging over my doorway is a huger spider. She is the size of a dime and is all black except for a bright yellow diamond on her body. She has a large grey ball that I think is an egg sack. I have never seen one like this before and was wondering if it was a black widow spider of not...
  7. J

    First Choice Vs Kingkutter

    Now I have gone AND DONE IT...... I went and got a KingKutter 5' rotary cutter and got it home and the paint finish on this thing is a joke. Some spots have paint sags from being sprayed too heavily, while other parts are barely covered with paint. The instructions that come with it...
  8. J

    Rotary Mowers Bush Hog Vs Kingkutter

    OK boys: I have a firm price of around $950 for a Bush Hog SQ-600 Brush Hog and I want some opinions on whether I should go with a 60" KingKutter instead. I think the Kingkutters are around $200-300 cheaper. Does anybody out there have a KK and how well is it built and how well is it...
  9. J

    Fixing a Mobile Home Roof

    OK Guys: Here is my problem. I have a 5 year old single wide Fleetwood Mobile home with a galvanized roof. Each panel is about 5 foot wide by 30 foot long. The panels are joined together by a flat cap that is shaped like a big staple and it is crimped onto where the 2 sheets join...
  10. J

    Anybody get to the Auction last weekend?

    Were any of the TBN's at either of the auction last weekend in Upstate NY, Either Macfaddens or Salem ? I went to both and Salem's was very disappointing . I then drove to Sharon Springs and Macfaddens was much better. By the time I got there they were half way tru. And of course I missed...
  11. J

    50W Headlights

    My 2710 headlights are the stock 27W type. I have been reading on the message board that there are brighter bulbs available from Autozone. But they have changed their supplier of the bulbs. They were called Night Blaster, stock number 702 (35W) and 701 (50W). They are now Pro Series from...
  12. J

    Hydraulic chute rotator for a B2772 snowblower

    I have gone ahead and made my hydraulic Chute rotator for my BL2750 Snowblower for my B2710. I bought a hydraulic motor from Northern Tool for $157 and had hoses with couplings made up for another $130. $10 for scrap metal and I have completed it in about 5 hours. I have put it on this past...
  13. J

    What is the hydraulic Flow for 2710 ?

    I am going ahead with my threat to make a hydraulic chute rotator for my B2772 63" Front mounted blower. The kit is $595 plus tax. I have a hydraulic motor in mind. I have machined a bolt onto the worm gear and used a torque wrench to manually spin the chute. It looks like it takes about 100...
  14. J

    Backhoe The 'BEST' Backhoe

    The \'BEST\' Backhoe I'm almost afraid to ask this question, because there indeed may be no real 'right' answer, but here goes. I bought a 2710 this fall and now that tax time is over I want a backhoe. I realize that I can't have a CAT backhoe, but maybe a WOODS 7500 type/size would be...
  15. J

    Snowblower - Hydraulic Chute Rotation

    I have a Kubota front mounted snowblower attachment that has hand crank chute rotation. I want to make it hydraulic, but Kubota wants $595 for the hydraulic kit. This is way too expensive. I want to either buy another manufacturer's kit or make one myself. Does anyone know of a supplier of...
  16. J

    B2762 Drive Kit for Quick Hitch

    I have a 2710 and am in the process of installing the B2761 Quick Hitch Attachment for the Front Mounted Snowblower I purchased. I have assembled everything as per the Install Manual and when I try to install the Mid PTO Driveline, it appears to be too long. I have slid the front coupling as...
  17. J

    Price Check 2710 Fair Price ?

    I'm in Upstate NY and was given a price of $15,000 for a new 2710, with a 402 Loader, 60" bucket (not 54") and the Optional 4 position value so I can use the front snoblower in the future. It seems fair, could anybody give me any feedback as to this price/tractor? Does anybody know where I can...
 
Top