Search results

Results 1 to 50 of 87
  1. nwut05

    Grading--what am I doing to cause this?

    Maybe already said but weight and speed have a lot to do with the ripples. weight because the 3pt has no down pressure and just bounces with every rock and bump. angle will help with the grader blading and some of the ripple effect. The speed effects box blading a lot. But the box blade could...
  2. nwut05

    Bolt Size Help

    You missed part of why I wanted to find the correct bolt, and I have future plans to attach to those bolts, which I did not exactly specify in the post. My challenge and the first thing I had to do was make sure I had the correct bolts for the holes. Those holes are blond holes in the front of...
  3. nwut05

    Bolt Size Help

    Thank all of you who stayed with this post I have actually seen a lot of tools and gained experience from this and that is what this forums are about. Again thanks to all and it is confirmed for sure 16mm x 1.5 threads in case anyone else ever needs to know. also they are about 40mm deep.
  4. nwut05

    Bolt Size Help

    Thank You Very much. I got a tap and ran it in the holes and cleaned them out and they work perfectly.
  5. nwut05

    Bolt Size Help

    ok on the tap understand thank you again
  6. nwut05

    Bolt Size Help

    Hey that is great information..I went by my local Kubota dealer today and told the part's guy what I was looking for. As usual He get's on the computer and starts searching the diagrams, I told him he would not find them by diagram. After about 3-5 min looking at his computer screen and asking...
  7. nwut05

    Bolt Size Help

    Hey I would if I had one, I'm by no means a mechanic (that should be obvious by now lol ) and the tap and die set is what I have and it's missing some, or, maybe a lot of what used to have in the set. My guess is that if it had a pitch gauge it got pitched somewhere at one time or another over...
  8. nwut05

    Bolt Size Help

    I most likely have to agree with you on this point, mm that is, it just dosent seem right that the 16mm is so disagreeable. however i think we will know for sure in the coming week as i hope to have more time to get it cleaned inspected and a fresh bolt or 2. I am not even beyond going to a...
  9. nwut05

    Bolt Size Help

    Hey i need to also revisit my earlier post and say, 16mm will almost go in the hole but the threads don't seem to start at all and after looking either/both fine and course threads, of the 5/8 bolts i tried seem to be getting messed up where they are trying to start.....i tried again after i...
  10. nwut05

    Bolt Size Help

    Not exactly the thread i started but could be a discussion here... while we on the subject do you think or know if the loader mounts are cast iron or cast steel and how do you tell the difference...ping it? like a cheap anvil..????
  11. nwut05

    Bolt Size Help

    this may be very helpful to. i will have to dig around and see if i can find one locally if not it will be googel's and a day or to.
  12. nwut05

    Bolt Size Help

    this may be helpful just trying to find the right threads first thank you
  13. nwut05

    Bolt Size Help

    Bolt Update....here we go i have had time to fiddle with it some in between trying to do another million things. 1st off my tap and die set only goes to 1/2 inch bummer, that's just too small. Second 14 mm is just too small and 16mm is too big to start or even go in the hole. Third, and the...
  14. nwut05

    Bolt Size Help

    Update, Sort of? I was able to get some bolts and get to the tractor today. 14mm is too small and goes in the hole without even touching, However 5/8 bolt seems to be about the right size and will try to start a thread but i did not force it for fear of cross threading. So here is my plan, I am...
  15. nwut05

    Bolt Size Help

    Yes, the depth of the casting I am definitely already aware of watching as I do NOT want to crack anything That's also an important reason I want the right size bolt because it is tapped cast metal and I do not want to be trying to cross thread anything in it and risk expanding/cracking metal...
  16. nwut05

    Bolt Size Help

    Another cool tool to have in the garage Thank You very Much
  17. nwut05

    Bolt Size Help

    Great info thank you!
  18. nwut05

    Bolt Size Help

    this is very handy thank you!
  19. nwut05

    Bolt Size Help

    There is a wealth of information i am getting on here, and i understand some of the frustration also. I am away from the machine at the moment until next week for work so i was trying to get the right size to be ready to go when i get back to it. as i said my last try-s didn't produce any...
  20. nwut05

    Bolt Size Help

    they should be it 's on the same frame, Thank You
  21. nwut05

    Bolt Size Help

    very cool tool i will have to check this out thanks
  22. nwut05

    Bolt Size Help

    not same as mx. i have a m6060hd thanks
  23. nwut05

    Bolt Size Help

    this may be an interesting idea if i have to, i think they make a substance just for this "casting" technique in a different application though.
  24. nwut05

    Bolt Size Help

    nope the 10.9 is the grade not the size
  25. nwut05

    Bolt Size Help

    Yes i have those 16mm bolts i ordered that say 10.9 on the head also but they again are 16mm with a 1.5 pitch thread
  26. nwut05

    Bolt Size Help

    You have the correct understanding of what I am needing. Yes those empty holes in front of that bracket are what I am trying to find bolts for and yes they are threaded. However this is just a picture I found of someone else's tractor showing the holes. If I had tried to explain where those...
  27. nwut05

    Bolt Size Help

    I would love to have the option to take one of those bolts out and take it with me to a good hardware store or a local fastenal. But That is just a picture I found showing the holes i am needing bolts to fit. I agree with everyone that they are most likely metric....and reason I want bolts is...
  28. nwut05

    Bolt Size Help

    Hello, I am trying to find the correct size bolts to fit my M6060 I am attaching a picture I found showing the bolts holes I am looking for. I have tries several sizes both metric and SAE but to no avail. And I have looked at the diagrams at Messicks and they are not shown. Anybody Know what...
  29. nwut05

    Another confused first timer

    I will admit i have not read all of the post's in this thread, however as a multiple tractor owner and part/full time farmer i would offer my 2 cents. no matter where you live as you drive around pay attention to people working tractors in your area. This does not mean go buy what you see the...
  30. nwut05

    Brand new KIOTI dead on arrival

    I will admit i have not read all of the post however, what i read sounds like what you have described. I also have had my round with tractor problems myself and it has in the end cost me a lot of money trading and getting rid of units that were problematic from the get go. I would like to hear...
  31. nwut05

    Massey Ferguson 142RV baler

    Hey, I was just trying to find anybody that had some experience with a Massey Ferguson 142RV Round Baler. I am looking at one locally for sale and can clearly see it as a rebadged Hesston Unit and i think the model 1734 followed it. It's a 1996 model and looks by pictures to be in good shape...
  32. nwut05

    Corn Question????

    Thank you yes i did get the response I did read the response and got the answer thanks again.
  33. nwut05

    Corn Question????

    Thank all of you for the responses, I get lost in the conversation and think you guys are maybe blaming me for the "pretending to be a farmer and a kid" comments! kind of boggles me actually, however after re reading the posts and the response's to my last reply, I'm pretty sure it's not me but...
  34. nwut05

    Corn Question????

    ??? I just want to be sure here....It was not my post or my comments that offended anybody right? I think my post took a left turn to somewhere I did not intend, and is being used in a way I could not have imagined! I just had a Corn Question, and it turned into a Corny, Catastrophic, face...
  35. nwut05

    Corn Question????

    Thank You and agree with moisture, however I can irrigate my 2 acres fairly easily if it sets in dry. Also, I think any farmer is as real as the next farmer just scaled differently and takes a different gamble. And I agree with learning something new always.
  36. nwut05

    Corn Question????

    Thank You again, it says 112 day corn. I am looking more for the fodder/maze end but just wanted to know that I had options for the actual corn ears left over after they dry on the stalk and don't get eat by wildlife etc.
  37. nwut05

    Another try at new tractor

    My Opinion Buy the Kubota and don't look back, Just had the same problems with availability of the m6060 the whole tractor though. They made sure I was serious about trading/buying after just a few emails and 2 visits and they had me a whole unit in a week from another dealers inventory. It was...
  38. nwut05

    Corn Question????

    thank you
  39. nwut05

    Corn Question????

    Ok guys, just to sort some of the responses I have got from my end, First thank you for taking the time to reply, Second, I looked for an appropriate subtitle to post it in and came up with nothing so I gave it a shot in this forum. Third, I agree with the forum/site being here so we can help...
  40. nwut05

    Corn Question????

    Hey I know this is a Tractor Forum and I should ask somewhere else but I am not a corn farmer and hey, Tractors and Farming usually go hand in hand so here it goes with all apologies. I just planted a bag of field corn to use and sell as fodder shocks in the fall, I bought the seed at rural king...
  41. nwut05

    Warranty Question and Thought?

    Thank you for the input and views, I have never worried much about this myself and have had several major hydraulic warranty claims in the past on new tractors with no issues from the dealer. I just wanted others opinions on the issue he brought to me. However in this world of Passing the buck...
  42. nwut05

    Warranty Question and Thought?

    I been a tractor owner a long time and a friend of mine just bought a new Bota with lots of warranty. He asked me if he used it with his equipment that had hydraulics on it would would it void the warranty? I was stumped, I had never really studied this question until now. His reasoning is that...
  43. nwut05

    John Deere 350 mower PTO Shaft

    Hello, i just recently picked up a John Deere 350 sickle mower 9 ft bar. I only got half of the PTO shaft with it and for the price i got it i was ok with that. Here is my problem, I took the PTO Shaft off the Mower and it is 21 Spline at the mower end, Easy enough i figured, so i bought an...
  44. nwut05

    new holland t4.75 AC Compressor Clutch kit

    I have a New Holland T4.75 with a Sanden SD7H15 air conditioner pump and i am looking for the clutch kit. Does any New Holland or shop guys know if i can buy just the kit or do i have to get the whole compressor. Google finds me the Whole compressor but having trouble finding the clutch kit? I...
  45. nwut05

    Roofing discussion!!!

    Hello all, I just wanted to get some other opinions and objective discussion about a situation i came across this weekend. I observed a roofing contractor who installs a lot of tin roofs. He was doing something i thought was maybe worth discussing. I observed him working on an existing roof...
  46. nwut05

    T4.75 foot throttle sensor question

    I recently acquired a 2014 t4.75 powerstar and i got in it today and cranked her up to use it and it gave me a foot throttle sensor code of 3003. The engine also was idling very high. so i shut it off and restarted and it went back no normal. My question is i had to research the code to find it...
  47. nwut05

    Going to Look at T4.75 today repost

    Hello again, Just an update. we went and met the Boy he was very nice and very accommodating. We crawled all over the tractor and drove it around for about an hour or so and he even offered to let us hook it up to something and run the pto and hydraulics to test them. I told him we were going to...
  48. nwut05

    Going to Look at T4.75 today repost

    Hello ANY T4 Owners, I am going with a friend today to look at a 2014 NH T4.75 4wd with loader and cab. Tractor has 400 hrs on it and is 2 owner. The current seller says it is too big for him. But his asking price is great, maybe too great, almost scary great! but it is 10 minuets from our...
  49. nwut05

    Going to Look at T4.75 today

    Hello folks, I wanted to reach out to the New Holland T4 owners and get some input. I am going today with a friend to Look at a 2014 New Holland T4.75 4wd cab with Loader. I have read a lot of negative reviews, and a lot of good reviews and Myself have had several tractors but nothing this big...
  50. nwut05

    Blue Barrel Culvert Idea, Is it Crazy?

    Hello everyone, I have a ditch that is about 8 ft across at the top tapers to about 3 ft at bottom, around 6-8 ft deep and about 75 feet long . The pond drain runs in this ditch all the time as i have a spring fed pond. The pond drain is 10 inch and handles the pond water just fine until heavy...
 
Top