Search results

Results 1 to 50 of 116
  1. rdinatal

    Emax 22 Backhoe Locked up

    I think this.. Supply (high pressure) Return (low pressure) Return from relief valve(s)
  2. rdinatal

    Emax 22 Backhoe Locked up

    Why the 3 lines? Supply, check. Return, check. What's the 3rd?
  3. rdinatal

    Don’t buy mahindra

    I don't have the big models only the eMax25 and then stepped up a bit to a Max26. Super happy with both. Mahindra won over JD and Kubota in my research in getting a hobby tractor. I'm sure each mfg has skeletons.
  4. rdinatal

    Max26xl HST Diff Lock Pedal

    That describes what I see. Thanks.
  5. rdinatal

    Max26XL anyone have a their 3 point hardware removed because of installed backhoe?

    Sure. Issue is the mount rod through the transmission mounts is stuck. Can't remove the pins and slide it. My plan is to work on this. Might need to remove one wheel. Unfortunately life, work, weather isn't cooperating. Since it now lives on a trailer I just can't work when I want.
  6. rdinatal

    Brake adjustment ?

    Why do you think adjustment is needed? I ask as I had an eMax and always thought the brakes were weak. They worked but if I forgot to release the lock the HST would easily overpower them. I now have a Max26. When those brakes are locked the HST will not move it. BIG difference between the two.
  7. rdinatal

    Max 28XL HST Pressure Help

    Did you find one?
  8. rdinatal

    Hydraulic Relief Valve Shims

    This is on a Max26xl but may relate to other models. I need to increase the pressure off the main relief valve (currently low). The shim (items 27-30 on attachment) descriptions are very cryptic. Any internet search shows they're not available. 10052405130 Shim T=0.1 10052405140 Shim...
  9. rdinatal

    Max26xl HST Diff Lock Pedal

    It doesn't unlock immediately which is my expectation. It does after some movement. Yes, the 1" drop then engagement upon wheel movement is what I see too.
  10. rdinatal

    Max26xl HST Diff Lock Pedal

    Thanks Joe. Being in NC I never thought 'snow' in mid April. 🤪 I used the backhoe out riggers so one wheel was up and the other was in contact with a slick rock. Normal operation without locking, stepping on the lever locked it up. Upon release it didn't unlock immediately although it...
  11. rdinatal

    Max26xl HST Diff Lock Pedal

    I never used the diff lock till yesterday. It works, just press with left heel. But upon letting up it only rises 1" or so. Seems like the pedal lost a spring. I can pick it up by hand and lift it 2" but it drops right back. Can someone check if the pedal is under spring tension? (Held up till...
  12. rdinatal

    Good Price

    I would say yes but I would try $15k. The question is if you want the mower. Since the price is 'firm' that's what you need to answer.
  13. rdinatal

    Backhoe Thumb

    I have a job to really utilize and work the BXpanded thumb this weekend. Moving large rocks, stumps, etc. Will post some pics, if I remember....
  14. rdinatal

    Backhoe Thumb

    Hmmm, check for clearance in every position. (If not already, multiple times)
  15. rdinatal

    Backhoe Thumb

    No, but there is a gap. I was going to measure and cut 3/4" ID tubing to fill. Washers could be just as good. Looks to be 1/2" on each side. I don't see that as an issue as any force would be mostly along the length of the square tube.
  16. rdinatal

    Backhoe Thumb

    Had some extra time to get it installed. Took about 30min to put on.
  17. rdinatal

    Max26XL anyone have a their 3 point hardware removed because of installed backhoe?

    On my 26xl all the 3point hardware was still installed with the backhoe still on. The arms were under and tied together with a bracket, all other hardware was also strapped on.. I'm in the process of removing it as I could use the extra 3-4" of clearance. When I get the lift arms off I can...
  18. rdinatal

    The GOAT retires !!?!

    I expect so. He only came back when Brady did. Package deal.
  19. rdinatal

    The GOAT retires !!?!

    He tried to get in the SB one more time. To come back against the Rams, what 27-3 and tie. The the Rams had enough time to make that Hail Mary pass pay off. Not being in the game will not sit well with him. I suspect some position for him to be around the NFL in the future.
  20. rdinatal

    Emax20S pallet forks

    A guess but just shy of 200lbs.
  21. rdinatal

    Backhoe Thumb

    Just got the Max26 back from getting the hydraulics adjusted. They found the main relief valve and two valves on the backhoe that needed adjusting. I'm waiting for the thumb so I can put it on!
  22. rdinatal

    Backhoe Thumb

    I like the weld on better than the sandwich plate bolt on. That's a good price.
  23. rdinatal

    Backhoe Thumb

    I looked at those. Nice but I didn't want to scrape, weld, paint.
  24. rdinatal

    Backhoe Thumb

    Welp, I just ordered a thumb from BXpanded. Had to call as it's not on the website. Was told it's fashioned (bent) like the JD 260b. Only difference for the Mahindra 26B is the telescoping bracket hole is in a different position. Had them in stock, Mahindra red too. Ship by end of the week.
  25. rdinatal

    Ballast Box

    No, never taking the FEL or BH off. Those are my main tools. I don't even have a scrape blade anymore.
  26. rdinatal

    Ballast Box

    Correct. When I had the eMax25 I made a box that held 300lbs of lead blocks. That with filled tires was great. The new to me Max26 has a backhoe. There's my ballast. The previous owner filled the tires but I'm considering draining them.
  27. rdinatal

    Noob Here...Seeking a Tractor Education

    You meant to say at the end: 'Eventually, time will tell.'
  28. rdinatal

    Noob Here...Seeking a Tractor Education

    Last seen Friday at 1:20 PM So, that makes it December 17th.
  29. rdinatal

    Leaking Radiator Fluid

    Is that where a freeze plug was?
  30. rdinatal

    Bad alternator? (4110)

    Alternators usually put out 13.5v-14.8v. If after starting the meter at the battery isn't at least 13.5v I would troubleshoot the charging circuit. It could be the alternator or voltage regulator. Keep in mind that some alternators have separate regulators, some don't.
  31. rdinatal

    Noob Here...Seeking a Tractor Education

    Dealerships go both ways. I've experienced the attitude from a lot of brands. Luckily there are 3 local (within 50mi) Mahindra dealers. The one I bought from only deals in Mahindra and Stihl, along with 1 or 2 local ZT mowers manufacturers. They have supported the time my eMax25s needed...
  32. rdinatal

    Mahindra Tractors-Should You Buy One?

    I had an '15 eMax25 with FEL. Sold it because I had an offer I couldn't refuse. Was on the hunt for another tractor and came across a '15 Max26 with FEL and backhoe. The thing works way above its weight class.
  33. rdinatal

    Backhoe Thumb

    call 865-671-0083
  34. rdinatal

    Backhoe Thumb

    Great question. I'm also looking at adding a thumb to a 26B. The Mahindra thumb seems like big $$$, if you can find one. BXpanded has one that supposedly fits Mahindra's two small backhoes.
  35. rdinatal

    Sealant or No Sealant, that is the question...

    Hose/male fitting > restrictor swivel/female > cylinder
  36. rdinatal

    Sealant or No Sealant, that is the question...

    I'm about to put an in-line restrictor on one side of the backhoe boom function. It needs to be slowed down. The part is this: Apache 39004276 3/8" Male Pipe x 3/8" Female Pipe Swivel - 1/32 Restricted - Hydraulic Adapter (Style 1404): Pipes: Amazon.com: Industrial & Scientific What to use for...
  37. rdinatal

    eMax 26L Loader SS Quick Hitch Adapter

    Your are correct on the eMax 25 upgrades. Mine was a '15 also. Very big difference between the eMax 25 and the Max 26xl. Not just the capacity but the physical size.
  38. rdinatal

    Max26 hst hydraulic ?

    Same number of fittings. The pedal shafts (2, left and right) have two fittings each. The front axle uses two massive bearings, not the typical pin/sleeve. This might be why there isn't grease fittings? I reached all around, none found.
  39. rdinatal

    eMax 26L Loader SS Quick Hitch Adapter

    Moved up to a Max 26xl... Problem solved.
  40. rdinatal

    Max26 shutoff solenoid wiring issue

    Hope this helps
  41. rdinatal

    New Owner: Max 26xl TLB Questions

    Yes, already needed it. When I first got the tractor the seat didn't move at all. It basically sat for 6 years.
  42. rdinatal

    New Owner: Max 26xl TLB Questions

    Thank you for the pdf.
  43. rdinatal

    New Owner: Max 26xl TLB Questions

    You are correct! I only saw one zerk on the pedal pivots. Today I was able to spend some quality time and... Yup, two zerks on each side, 2 on the same pedal pivot, opposite ends. One was a bear to get on, might need to pick up a 90deg for my grease gun. The front axle pivots but it seems...
  44. rdinatal

    New Owner: Max 26xl TLB Questions

    More questions... I don't have an owners manual yet, it probably doesn't show it anyway knowing how the other was. Where is the hydraulic main relief valve? Not the loader but the first relief valve before the loader and backhoe? What is the psi specification?
  45. rdinatal

    Electrical for 26XL

    Hope this helps.
  46. rdinatal

    New Owner: Max 26xl TLB Questions

    Yes, HST. I found only 1 zerk on each side. Guess I need to go under again and look some more.
  47. rdinatal

    New Owner: Max 26xl TLB Questions

    Wait, what?!? Two filters but one hydraulic pump/sump???
  48. rdinatal

    New Owner: Max 26xl TLB Questions

    Thanks. I would have missed the pedal pivots as the eMax doesn't have them. Nothing at the front axel pivot??
  49. rdinatal

    New Owner: Max 26xl TLB Questions

    I sold the eMax 25s a couple of month back. Waited patiently and found a great upgrade: 2017 Max 26xl TLB w/101hrs. Just got it home yesterday and still need to do a full fluid/filter change. There was no manual so my questions: I'm not sure how many grease fittings there are on the tractor...
 
Top