Search results

Results 1 to 11 of 11
  1. MIkeWard

    Can Bobcat loader lift and tilt smoothly?

    I have a new bobcat 2025 tractor. Under 10 hours still. I had a Ford 1920 and I used it a lot to move firewood on skids! I did 2035 tractor to demo for a few days. When lifting a skid of firewood I would always start lifting and at the same time tilt the forks a little to keep the firewood...
  2. MIkeWard

    Canopy made from Jeep hardtop

    I made a canopy for my Bobcat tractor 2025 model out of a junk CJ7 Jeep hard top. Removed broken glass and cut off sides. With a little sanding and painting was ready to go! Bolted it onto the ROPS with bolts from Ace hardware. Looks pretty good and will protect from falling branches too. I...
  3. MIkeWard

    Canopy made from Jeep hardtop

    I made a canopy for my ford 1920 tractor out of a junk CJ7 Jeep hard top. Removed broken glass and cut off sides. With a little sanding and Ford gray painting was ready to go! Bolted it onto the ROPS with bolts from Ace hardware. The engine went and I gave the tractor to my brother who has...
  4. MIkeWard

    1920 tractor not turning over with good starter

    Tractor won’t start I have a 1989 Ford 1920 tractor and it's been working just fine In the past I have replaced the clutch and have a thread on it here. Used the tractor the other day. Started normally, worked for a while. Parked it in the shed like normal. Went to start it up . Turned key and...
  5. MIkeWard

    Ford 1920 not starting not the NSS what is this part?

    Ok I have a 1989 Ford 1920 In the past I have replaced the ignition switch with Ford oem switch and was fine The neutral safety switch was replaced a year or two later worked fine Couple years later usually after first cold spell or when tractor wasn't used in a while tractor wouldn't start...
  6. MIkeWard

    ford 1920 Neutral safety switch

    Is there any way to test the switch I replaced it 4 or 5 years ago and now it seems to be bad again I used the tractor yesterday parked it and today no go! A couple of months ago I recall having to play with the F/R shifter to get it to start but all OK since then The part was not cheap and...
  7. MIkeWard

    canopy from Jeep CJ hardtop

    My brother had an old Jeep CJ hardtop laying around. I cut off the back window and sides. Made a nice even cut all the way around. Welded up some brackets. Didn't take long to do. If you look at the pictures I think I have the front angled up too high. I still need to finish welding and paint...
  8. MIkeWard

    Backhoe 758B backhoe swingarm chain broke

    The chain snapped on the swingarm . I got a replacement from my dealer. Here's the problem the hydraulic cylinder is all the way retracted under the housing, I need to extend the cylinder to work on it. I bled off the pressureand tried to pull it out with a come-along-no go. Before I do...
  9. MIkeWard

    Snow Attachments Snow Vehicle Concept (1924)

    I just came across this video and thought many would enjoy the modified Fordson tractor. Dial up modems will probably have trouble playing it. Snow Vehicle Concept (1924) Mike
  10. MIkeWard

    simple cheap firewood racks

    I was looking at what others on the forum were doing with firewood and did not see any racks made this way. The stone quarries use a similar setup, although it's smaller to handle large flat stone. I thought I'd modify it for firewood. Just add a couple of 2x4's to a standard pallet. Cut some...
  11. MIkeWard

    Ford 1920 clutch Help needed

    This is my first post on this forum. I have a 1989 Ford 1920 tractor.2,000 hrs I致e only had it for a short time and have used it for about 6-10 hours. I致e been moving sand with the loader and some light clearing of weeds nothing really too overgrown. The last day or so I noticed a lack of...
 
Top