Search results

Results 1 to 50 of 200
  1. gstrom99

    Groan part quatre

    Why are dogs such bad dancers? 'cuz they have two left feet.
  2. gstrom99

    Should a new tractor come with a full tank of gas?

    My tractors were not bought new. The JD zero turn mower I bought last year was delivered (and full of gas). No hat though...
  3. gstrom99

    Share Pics of People Hauling or Towing Something Wrong

    Brake lights? Nah, we don't need no stinkin' brake lights...
  4. gstrom99

    Groan part quatre

  5. gstrom99

    Groan part quatre

  6. gstrom99

    Groan part quatre

  7. gstrom99

    The last Barn. (maybe)

    I'm thinking of getting my barn project "foamed". Did they scrape it to match the thickness of the 2x6's? What'd they charge 'ya?
  8. gstrom99

    Sharpening "down" angle?

    I've always angled my file "down" the 10 degrees called for in the specs. I got a new 4.5mm Oregon file for my Dewalt battery saw. I actually read the directions :eek: yesterday and noticed it stated to run the file LEVEL @ 0 degrees. Which is correct, and what difference does it make?
  9. gstrom99

    Groan part quatre

  10. gstrom99

    John deere 455 Lawn tractor.

    PTO switch on?
  11. gstrom99

    Groan part quatre

  12. gstrom99

    Any ammo experts?

    I (well my rifles) never liked any Hornady loads. I always had my best accuracy from Federal (even their American Eagle) loads. Can't explain it, others say they LOVE Hornady's. YMMV. Try the loads that you can find, keep the one that works best.
  13. gstrom99

    Groan part quatre

    Oops. My bad.
  14. gstrom99

    Groan part quatre

  15. gstrom99

    Groan part quatre

  16. gstrom99

    Scary, life threatening, mistake

    I almost sent my trailer into the back of my truck, loading an Allis. I hadn't secured the hitch well and it flipped up from the extra weight. I don't like the "flip up" ramps, I was worried about them being the correct height, every time. My Sure-Trac has great ramps. I added weld on...
  17. gstrom99

    Is anyone here familiar with scaffolding?

    The towable lift I rent, is $270/day and a 35 minute drive, each way. For the inside work, I rented a small scissor lift, $300/day, 45 min drive (different place). Both worth it, IMHO.
  18. gstrom99

    Groan part quatre

  19. gstrom99

    Groan part quatre

  20. gstrom99

    Tell us something we don’t know.

    and just before the point of no return.
  21. gstrom99

    Is anyone here familiar with scaffolding?

    I have some scaffolds (Bil-Jak) but the upper pieces are very hard to assemble without extra help. As noted before, rent a boom/man lift. The drive to the rental place may seem far, but most also offer delivery. Kinda pricey. Self propelled are real nice, but may not be needed, depends on...
  22. gstrom99

    Groan part quatre

  23. gstrom99

    Groan part quatre

  24. gstrom99

    Ford 9N - Retrieve it or Leave it?

    I ordered two new (rear) rims for my 9N at TSC. Shipped to store. That was a few years ago (maybe 10?), though.
  25. gstrom99

    Good morning!!!!

    Good Morning. 55 this morning, with a hint of fall. Rented the lift yesterday and was able to finish the roof "repair" job. Most of the pulling out nails on the "good" side pounded down into good wood well. Still some soft areas of that wall and top plates to fix underneath, but I can do...
  26. gstrom99

    Groan part quatre

  27. gstrom99

    Groan part quatre

  28. gstrom99

    Good morning!!!!

    Good morning! Storms overnight, kept the dog (so me too) awake. 3" and still raining. Crops need it though... Hopefully it dries later today so I can finish the roof repair tomorrow (another lift rental day). May trim some trees too, if things go better than planned. Murphy's law applies...
  29. gstrom99

    The Tractor Scam 2018 Kubota Grand L4760

    I laugh at the tractor posts that state "no accidents, clean title in hand". Those get "reported", for what good that does...
  30. gstrom99

    Groan part quatre

  31. gstrom99

    Good morning!!!!

    I had the towable lift for two days. Boy those are nice. My plan was to slide the "new" panels under the edges of the old corregated ones, and that proved to be very difficult. They kept getting hung up on the underlying perlins and cedar shingles. I'll need to rent it again to finish the...
  32. gstrom99

    Groan part quatre

  33. gstrom99

    Good morning!!!!

    I was told the building isn't worth fixing, but I can't just leave it alone. It's a converted corn crib, with a fairly decent concrete floor. I've been working on this roof/building for a few weeks. It's been blown off for 20 years, apparently. The other side is intact, but alot of the nails...
  34. gstrom99

    Groan part quatre

    I didn't go in...
  35. gstrom99

    Low tech compact tractor options

    Mid 90's, used. Lots of choices. Get one with hydro drive, and a loader.
  36. gstrom99

    Share Pics of People Hauling or Towing Something Wrong

    The boat has more power than the itsy bitsy car... :p
  37. gstrom99

    Latest grab by auto manufactures

    You'd think a towing company would know about the workaround(s).
  38. gstrom99

    Jon Boat motor

    My 14-48 semi-V jon boat has a 15hp, which pushes it great. All boats have a rating sticker, with max load and HP (mine says max HP is 25). Get an electric start, if you can.
  39. gstrom99

    Groan part quatre

  40. gstrom99

    Ford 9N - Retrieve it or Leave it?

    TSC sells the correct fluid. https://www.tractorsupply.com/tsc/product/traveller-ford-tractor-hydraulic-oil-3-2-gallon-1277004?cid=Shopping-Bing-Product1277004-&msclkid=6bb7ddcc63661b37df7abf3d79f59bd0 Look at / replace the gearshift rubber boot. Even if not real cracked, any rain that hits...
  41. gstrom99

    New tractor owner

    Welcome to TBN. Nice tractor! You'll find plenty of (usually) good advice/opinions here. :D
  42. gstrom99

    Husqvarna LGT 24K54 - mower deck belt jumping off. AGAIN

    Yes, that too. I've seen the "bearing" burnt up on some, that didn't show bad until I took it off. Locked up, and melted the plastic.
  43. gstrom99

    Husqvarna LGT 24K54 - mower deck belt jumping off. AGAIN

    My SIL was having the same issue with his Husky. New belt didn't help. I finally got talked into looking at it (didn't take too much), and I figured out that he had it routed wrong. The routing is really goofy and once I had it wrangled around everything correctly, it was fine.
  44. gstrom99

    Help with roundup mixing.

    I also bought/tried that blue dye crap. Couldn't see it AT ALL.
  45. gstrom99

    48 8n wont start- Help

    There is a key to energize the system and allow it to crank, right? Bypass that first. Then, check/clean all connections. Simple, reliable machines. Go ahead an convert it, add electronic ignition too if you want. I did both to my 9n and never had an issue.
  46. gstrom99

    Groan part quatre

  47. gstrom99

    Field cars

    Without a door, what kept you from falling out, bouncing through the rough areas? I've been eyeing FB and CL for cheap field "cars" for awhile. Anything decent and running, is a grand at least.
  48. gstrom99

    Latest grab by auto manufactures

    Actually, she should have used a : instead of a ., after "lesson", since that wasn't a full sentence. Then the W in "Well" should've been small case, too... :p Poor grammar annoys me, also.
  49. gstrom99

    Help with roundup mixing.

    I buy Tordon "Ready to Use" in quart squirt bottles, at TSC. I use it for stumps.
  50. gstrom99

    JD 4600/460 loader - - Ideas for small on-board Chainsaw Storage?

    Great, that helps a TON. Thanks. I couldn't visualized how you did that.
 
Top