Search results

Results 1 to 50 of 107
  1. M

    LX Series Oversized Tires

    Here is quantitative data straight from the Titan Catalog, so everyone can make their own decisions on what is appropriate. R1's are not included in the table. Hope this helps.
  2. M

    Stock headlights vs Cheap 36 Watt LED Lights

    Starting this thread as LED light addition is a popular project and there is always some question on what wattage lights to buy. I'm including a few recent night photos to give some comparison how much light the lower wattage lamps put out compared to the stock halogen headlights. The tractor...
  3. M

    Glow Plugs...

    Recording this info in the event it helps anyone down the line. Summary: Glow Plugs: 19077-65512, 19077-65511, 19077-65510, 1J860-65510, 1J860-65510, 1J860-65511, 1J860-65512 are all linked as similar using Kubota's Illustrated Parts and Messick's. GP price is different depending on PN...
  4. M

    Help! L3240 won't start when cold

    Bferris01, To test the temperature sensor you'll need to know the exact coolant temperature and resistance value of the sensor. It is best if you can do this at two known temperatures. Since you're unlikely to have the exact temperatures referenced in the WSM, I've calculated the equation...
  5. M

    Mowing Travel Speed: What range is everyone using?

    About a year ago, I purchased a used B3030 Cab tractor with 72" mid mower, FEL and front snowblower for my 77 year old Dad to replace his BX2200. The B3030 has 3 speed ranges while the BX2200 only had 2. According to the published travel speeds, High range on the BX2200 is very close to the...
  6. M

    Fuel Remaining after No bars showing

    For owners of L4740, L5040, L5240 and L5740 tractors. Recently ran my tractor until no bars were showing on the fuel gauge and was a bit anxious as I was 1.5 miles from home mowing a field. Ran the tractor about 15 minutes mowing and took about 10 mintues to get home after it first hit zero...
  7. M

    Tie-Rods: Poor Quality

    Noticed a good bit of play in the front right tire/wheel when going down the road and confirmed the tie-rod was bad by lifting the tire off the ground and moving the tire left and right. Ordered a new Tie-Rod for a bit over $110 with tax, so it must be some super deluxe part that will last into...
  8. M

    Hydraulic Coupler Rebuild or O-Ring Size

    Reference: Hydraulic Coupler HNV38NP Kubota PN: 7J417-66320 Two couplers have developed a leak after putting the FEL back on after sitting for the winter while the front snowblower was on. I believe the o-ring visible inside the coupler is the root cause. Does anyone know the o-ring size or...
  9. M

    Help - Snowblower Electric Chute Linkage

    Reference Snowblowers such as L2173, L2174, L2175, L2185, L2194 etc... with optional electric chute actuator L2179 Help: Looking for guidance on how the linkage shown in the attachments should be positioned with respect to the stationary Chute bracket and how tight the bolt should be torqued...
  10. M

    B2650 Alternator Output for LED Lights?

    You might be drawing less than the rated watts suggest. I went through the trouble of measuring the current draw on a variety of the smaller LED lights (18, 27 and 36 watt units). The 18 watts either come in a 1x6 LED arrangement (row x # of LEDs) or 2x3 Led like you have. Both styles consumed...
  11. M

    Adding aux lights

    CMV, After measuring 3 different styles of LED work lamps, I found the rated watts to be overstated. If you disconnected your headlights, you'll have plenty of current to work with. I've bypassed the headlights in several applications without altering the wiring by using an equivalent plug...
  12. M

    Question for owners of L4600, L3560 and L4060 w/Turf tires

    For those who own a L4600, L3560 or L4060 with 27x8.50-15 Turf tires. Could you tell me what brand/model and ply rating the front tires are? Why I am asking? Thinking of replacing the front tires on my L3130 and it uses the same size turf tires as the models listed above. I called the local...
  13. M

    Self Leveling Valve for Kubota LA Loaders

    MrC. Perhaps to reduce confusion with what the OP is looking for, you should have started a new thread as the two applications appear to be different. If you search on Kubota's web site under Illustrated Parts List, you're likely to find what you're looking for. Not knowing your Serial number...
  14. M

    Canopy LED light replacement for cab M7040 of other

    Here's a quick test of the stock bulb versus the LED module described in earlier posts. The light cover was not in place for any of the photos. Stock Light LED With the way camera phones try to adjust the picture given the ambient lighting, I feel the photos understate the...
  15. M

    Canopy LED light replacement for cab M7040 of other

    I bought the same LED for the dome and was wondering how you mounted the LED inside the housing? There isn't a flat spot to mount using the 2-Sided tape. Did you just lay it inside the dome cover? Perhaps the photos will help describe the situation. Sorry for the flipped picture below.
  16. M

    Self Leveling Valve for Kubota LA Loaders

    bdhsfz6, The option is $599 and can be purchased through wholegoods under order code L2271. Here's the detail from the Wholegoods listing... Hydraulic Spill Guard for LA1055 Loader L2271 Hydraulic Spill Guard, anti-spill feature for buckets 38lbs $599.00 Perhaps if you search on L2271...
  17. M

    Snowblower Wings Homemade

    Thanks guys! I was hoping others would benefit from the concept and perhaps improved the design. I forgot to mention in the original post how the holes were created in the 3/8" conveyor belting. Chucked up a spent 380 shell in the drill press and slowly applied downward pressure as it rotated...
  18. M

    Snowblower Wings Homemade

    Moving the 72" front mounted snowblower from the L3130 to the L4740 cab was easy enough, but unhappy how the blower barely covers the rear tracks of the R4's. Looked at purchasing wings from Kubota, but unfortunately the wings only add an additional 5" of overall width (2.5" per side) at a cost...
  19. M

    Block Heater Installation on B3030 Cab Tractor

    Installed Kubota Block Heater 7000-73274 on a B3030 Cab tractor and thought I would document in the event it helps anyone. The installation was very straight forward requiring minimal skills. Before attempting to remove the pipe plug, applied penetrating fluid to threads starting 24 hours in...
  20. M

    Toggle Switch Location and Power Source

    Looking for suggestions from the community. In the process of attaching a snowblower to a new-to-me L4740-3 Cab tractor. A DPDT toggle switch is needed to control chute deflection and was wondering if anyone had some good ideas where to mount the toggle switch and if a spare 12 volt supply is...
  21. M

    Cab work lights changed over to LED units

    Just thought I'd share with the group in the event it helps any one. Like some folks, I have been changing over most halogen applications to LED as I simply like the extra light output and coverage. Currently changing the front and rear Kubota cab work lights on a L4740 to LEDs. For the front...
  22. M

    Mowing B3030 rear PTO slipping

    Here's the exploded view in the event it helps your understanding.
  23. M

    Kubota B2782 Front Mounted Snowblower

    I am looking for a Kubota B2782 63" front mounted snowblower. The more complete the package to fit on a Kubota B3030 Cab the better, but I'm also willing to purchase this snowblower if it came from other B-Series tractors. Typically there are minimum of four items needed to make the snowblower...
  24. M

    which loader for L4240

    Here's what I found in one of the Wholegoods catalogs.
  25. M

    Price Check Used 2015 25D with about 100 hours

    Tractordog, Attached you'll find the price form the March 2014 Wholegoods pricing. Sorry, but I don't have a 2015 guide. In any case, it should give you a good idea what the list price was in 2014.
  26. M

    Backhoe BH90 on L3940-3. Why not?

    I'm considering upgrading my tractor to a cab tractor, but hate to get rid of the BH90 backhoe I already have. According to what I have found using the Wholegoods documents from the last few years, only the BH92 is compatible with L3x40 cabs. While the BH90 will fit non- cab GL 40's, there...
  27. M

    Fuel to injector pump, but won't start. Solenoid and injector questions

    Besides the ice, what are the yellow chunks in the 1st photo and possibly the 3rd photo? I'd be a bit worried where they came from and why they are in this location. Reference the circled area:
  28. M

    Kubota L-45 Intellipanel indicator not working

    hydrori, Here's what I found, but please confirm for yourself... Item #30, PN: T1060-30270 Description: Bulb, Monitor From parts look up at Messick's Kubota: BULB Part Number: T1060-30270 Vendor: Kubota Messick's Price: $6.40 Stock Quantity: 0 Weight: 0.00 lbs Days to Order: 5-7...
  29. M

    Snow Frozen joystick in my L5030

    Jayhawk, When S219 talks about "Cans", I believe he is referring to items circled in the attachment below. (Just thought a picture might help some folks referencing this thread) Regards
  30. M

    Tires finding wheels for an L225

    Beaverplt, Did you consult your local Kubota dealership? It looks like the wheels are still available, but at a significant cost. Looking at the parts listing on Kubota.com, it looks like there are different p/n's for left and right hand side. Not certain why, but that is the way they are...
  31. M

    G5200 (4200 or 3200) Fan Alternator Belt Replacement

    I am trying to repair an old G5200 Kubota Diesel with a fan/Alternator belt that is beyond its useful life. The problem is it looks like the lower (motor) pulley also drives the shaft to the hydrostatic transmission, so the belt is captured. Something has to come off, but what? Anybody have...
  32. M

    BX2200 seat replacement

    gsganzer, I found the original paperwork in the event it helps in your search for a replacement seat. Please note the price listed in the earlier posting was with 10% off due to a sale that was going on. Can't find the paperwork for the arms that go with this seat.
  33. M

    Turf Tires

    Here's the picture of the Wholegoods pricing:
  34. M

    L3750 Hydraulic Filter. Need expert help!

    Using Messick's it is fairly easy to check part numbers. Please keep in mind I'm not certain if this is a L3750, L3750DT or L3750F. Using the "frequently used parts" L3750DT the following appear. It indicates 36330-82630 is the correct part number. and If you're interested in the WIX...
  35. M

    Filter for MX4800

    From the link provided by horse2, use the "Advance Search" option under "Search Filter". This will bring up another screen. Use the "Vehicle" option and select "Off-Highway Equipment". In the new screen select "Kubota", "Tractors", Enter your model MX4800? where the ? is DT, F or H. If...
  36. M

    L3240 Filter delima

    orangeandgreen, I've used several small rare earth (neodymium) magnets in place of the stock Kubota magnet. They are much stronger and take up less space. I thought I had pictures to describe, but couldn't find them. Along those lines here is a link showing how the same type of magnets were...
  37. M

    L60 with front snowblower - pavement scraping

    Sandalwood, I realize I don't have the same setup, but perhaps this will help anyway... My front mounted snow blower doesn't leave scrape marks and it has metal shoes. The front of them are angled upward slightly. I tried looking on line for your snow blower to check out the shoe design but...
  38. M

    Where to buy a new Kubpta tire?

    Below is an example from the Wholegoods price list for a 8.3-16 tire/wheel assembly albeit for a B series tractor. As you can see, the price list is from March 2014, so it should be fairly accurate. (see wholegoods picture below) Wholegoods: If a tire and wheel assembly was...
  39. M

    L2195 Shear Bolt, PN 70060-04440

    Can someone verify if the shear pin, PN 70060-04440 used in a L2195 snow blower is a conventional 5/16" grade 5 bolt or one with a reduced diameter to control the shear point. I called Messick's and they don't have any in stock to confirm the design and the closest one is located in TX and I'm...
  40. M

    Snowblower Ever heard of an Inland SA-60?

    I don't have mine any more, but was very satisfied how it performed over the years. It tossed the snow a fair distance and my PTO was driving it at 540 RPMs.
  41. M

    B7500 wheel lockup

    Perhaps this attachment will help in determining how to remove the driveshaft. Part drawings can be obtained by going to www.messicks.com. Enter the information and it will be sent within a minute or two. Curious... Does the problem occur in both 2 and 4 wheel drive?
  42. M

    Big Difference on M7060

    Not certain the 1 gallon is going much for freeze protection. Here's a chart for the OP to reference to see if he feels comfortable with his ratio.
  43. M

    NEED IDEA FOR "FENDER FLARES" FOR AN l-SERIES

    512High, Kubota has an "Overfender Kit", L8365 (Cab Fender Extensions) Not certain of the price.
  44. M

    How many gallons of fluid will my tires hold?

    K0ua, I wasn't trying to contradict your post. You'll noticed that we posted at the same time, so I was not aware of your reply. I was simply posting what Firestone published. For what it is worth, Titan lists 29 gallons at 75% fill. Depending on the tire construction I could see where this...
  45. M

    BH92 bucket same as BH90?

    According to the Wholegoods 2013 the buckets are different p/n's between BH90 and BH92.
  46. M

    First Modification of the Year: Air Horn Install

    Added a cheap air horn to the tractor today and thought I would share the experience. Bill of Materials: 1) 135 dB Super-Loud Air Horn from Harbor Freight (item#40134, $14.99) 12 Volt Super-Loud Air Horn 2) Momentary Switch purchased from Tractor Supply ($2.99) 3) Miscellaneous wire (12 and 18...
  47. M

    Trail Cam Surprize

    Looking at various pictures on the internet, I agree the Mouflon is more representative of what we have lurking the neighborhood. The white patch on its side matches that found on web pictures of the Mouflon. Here's a picture my neighbor captured.
  48. M

    Home Made Front Fenders for L3130

    I was tired of getting covered with snow slush and water spray when out snow blowing, so I decided to make a set of front fenders. After contacting a few folks who tried installing them to pivot with the wheels, I decided to take the easier route and mount them stationary using the FEL...
  49. M

    Trail Cam Surprize

    Thanks for sharing Rwork. It's crazy what shows up. The other week I had a ram show-up on my trail cam which is almost unbelievable as they are not native to PA or anywhere close to here.
  50. M

    Buying Advice Snowblower price

    lobsterman1, Consider asking for the owners manual. It can be invaluable in procuring replacement parts and identifying the recommended shear pins (auger, fan, pto, etc...). It might also be worth asking the seller to ID all the shear pins and make certain the PTO shaft is complete. I like to...
 
Top