Search results

Results 1 to 50 of 71
  1. R

    Massey 265 front crank driven pump

    Looking for a front mount crankshaft driven hyd pump/ bracket etc for a 265 massey.
  2. R

    WTB taylorway bog harrow 200007

    wtb... taylorway bog harrow like pictured. Looking for model number 200007. Located Alabama but will travel or pay shipping.
  3. R

    WTB taylorway 200007

    WTB...looking for a taylorway bog disk like pictured. Model is a 200007.
  4. R

    Any info on this disk plow?

    Picked this up. Its a taylor brand from athens tenn. cant find a model on it, or coming up blank also with a google search. Wondering what yr etc it might be.
  5. R

    id on this disk?

    Anyone able to id this make ?
  6. R

    Kubota 8560?

    Looking at buying a 8560. Bout a 2012 model. Anything to look out for on these or check before i buy?
  7. R

    New to me MF 165. what to look for

    Picked up a diesel 165 for a back up tractor. Just picked it up so havent had time to go over it really to check for any issues. So far ive noticed they have the diff lock pedal locked out where it cant be depressed. Anything to look for on these particular models that are problems?
  8. R

    Tafe tractors ?

    Any input on Tafe tractors? Specifically a 35di model. I havent laid eyes on it yet but he says it has a leaky injector pump but cranks and runs fine.
  9. R

    L3130 ?

    Gotta buddy looking at a used L3130 4x4 gear drive I think its the 8 spd and not a 12. Any know issues with this model ?
  10. R

    ZD 1211 recall ?

    Anyone else gotten a notice for a reserve tank nozzle defect? Anyone had it done and what was the fix?
  11. R

    Athens disk plow ?

    We picked up a old Athens 3 disk plow the other day. Looks similar to the pics of the Athens 300's Ive seen but is a little different. Its rear guide wheel will pivot side to side and has a bar running up to a pivot toward the front. At that point it has something missing. As it is now the...
  12. R

    Deere 5420 clutch slip and replacing

    Gotta buddy who bought a cabbed 5420 a few months back. previous owner said a clutch had been installed in the last yr or so before selling. My buddy has used it for a few months and now its getting hard to go in gear and grinding. They split it and just by looking at the removed clutch can...
  13. R

    245 with multi power?

    Got a buddy who just picked one of these up. I havent laid hands on it yet. Best I can tell online on the multi power is. In low it freewheels. In hi its like a regular tractor and engine will slow it down. That correct? Also, he said the pto will work in the direct ground speed mode...
  14. R

    Anyone use a offset flail mower ?

    Ive got a bush hog ditch bank mower for one of my larger tractors but I saw one of these offset flails and from the specs I could run it on my 45hp. It also swings back behind the tractor and that would be a big help because I could get it down narrow lanes where I cant go with the bush hog...
  15. R

    ZD1211 work lights?

    Anyone installed any? I was told there is a factory plug to tie into. ive found the optional fuse and wire on the fuse box but havent found it yet on the harness. Im sure they have it tucked inside somewhere out of the way.
  16. R

    Kubota ZD1211 first impressions

    Got to get a couple of hours in on the ZD1211-60. First thought is man this machine is quick and quiet. What usually took me a hour on my 455 deere (22hp diesel) with 54" deck took about 20-25 minutes on the ZD. Probably could have shaved 5 minutes off that if Id have dropped the ROPS...
  17. R

    Agco 30 trans parts?

    I did a quick search online but came up empty. Any sources to get Agco transmission gears or shafts from?
  18. R

    3 pt rotary ditcher ?

    Anyone used one of these rotary ditchers? If so how did they do? AMCO's Rotary Offset Ditcher - YouTube
  19. R

    ZD 1211 , 60 vs 72" and side vs rear discharge ?

    Almost pulled the trigger on a used ZD but after looking at so many that never could work up a comfortable deal on Ive decided to start looking at new machines. I will start by telling what I have to do with it. Eventually I will have 4-6 acres of lawn to cut after all my clearing is done...
  20. R

    Iron Bull Trailer ?

    Been seeing a few of these listed for sale. Look to be well built HD trailers. Anyone seen one in person or have one? Iron Bull 14, lb Equipment Trailer
  21. R

    Taylor-way disk info

    Im picking up this disk next week and i cant find any info on it. Taylor-way 200004 is model on tag. Ive exhausted my googling skills on this one. Was hoping to order some new disk for it but cant find what shaft size they are to order them. Any help ?
  22. R

    Deere 2040S .. still looking for info

    Im still looking for info or input on purchasing a Deere 2040S model... its a German made machine and my local dealers draw blank stares when I add a S to the end of 2040. Anyone dealt with the german models and parts availability ?
  23. R

    D05 subplate

    Looking for manufacturer of this D05 subplate, or one just like it. .. Has on it c11952 .. 2nd line 18136-A-019 google comes up a blank.
  24. R

    2040S pros and cons ?

    Looking at a 2040S. Looks to be in great shape.. any pros and cons on this model?
  25. R

    HP needed for 90" finish mower

    I have found a 90" finish mower I may go look at. The specs say max engine hp of 60hp but it shows no minimum hp requirements. 30 pto hp be enough for it?
  26. R

    rear remote valve block kit

    Am i correct that this block and valve assembly if its plumbed like a Wr long 3rd function kit that gets its pressure off the loader valve block, and then returns to the block under the floorboard would work properly? Only thing i havent found out yet is if it is a open center, or closed...
  27. R

    Bog type disc or standard ? Pros and cons

    Ive been seeing quite a few of the bog type disc for sale locally. What are the pros and cons to them over standard disc? I can see one advantage for what I use mine for, and that is its half the length and would allow me to get into tighter food plots with it. It also would allow me to...
  28. R

    Which used ZD model ?

    Ive have google but not found much opinions. Looking for input good or bad on used ZD models. The price range im finding them in are machines that are about 4 yrs and older. Any certain ones to stay away from? 21 and 331 seem to be the main models that pop up for same in this area. I will...
  29. R

    Pull type box blades?

    Anyone using a pull type box blade? I have found a 8 and a 10 for a tempting price. Would be mainly for road repairs that never end (over 50 miles of road). The back wheels can be manual or hyd. I know you couldnt berm roads with it. but with the guage wheels seems like it could be a good...
  30. R

    Ag and truck tires 10% off and free shipping black friday sale.

    Just a heads up if anyone is needing tires. 10% off and free shipping.
  31. R

    Ag and truck tires 10% off and free shipping black friday sale.

    Just a heads up if anyone is needing tires. 10% off and free shipping. SimpleTire - New Tires. Every Vehicle. Best Prices. | Free Shipping of Popular Tires!
  32. R

    Lowery / LMC 7 ft cutter is heavvvvy

    Took in on trade a LMC/Lowery brand 7 ft cutter. Man this thing is a heavy beast of a cutter. The massey 265 wants to ride wheelies with it on there. Time for about 400# of front weight to be added. If your looking at one of these know ahead of time its going to take a good sized tractor to...
  33. R

    Where to get wider front rims?

    Looking to replace the narrow fronts (6-16) on a massey 265. Would like a 8, or 9x16 on it but so far havent found any. Something wide like the ones in this picture are what id like to have and get rid of the narrows I have now. Anyone know where possibly could get some? or what other...
  34. R

    261 or 265

    Been looking for a inexpensive spare tractor int he 50-70 hp range. Have found a 261 and a 265. Both withen my budget. Condition of each is about the same. I know the261 is a newer model, but is also about 800# lighter than the 265. Neither have any wheel or front weights. This would...
  35. R

    Anyone had a TITAN brand cutter?

    Anyone had any experience with TITAN brand cutters? I almost pulled the trigger on one of their 72" cutters. 100hp gearbox, 5/8" stump jumper and heavy built. Titan 16 Series
  36. R

    Land pride cutter replacement pan

    While waiting on my RCR2672 to come in I need to fix a used RCR1872 I picked up. I need a replacement stump jumper. Parts breakdown shows it to be part # 312-841H ..15" dishpan small hub Comer. Brochure specs show it having a 24" with blade holder bar. DO not have the cutter close...
  37. R

    EA 3rd function valve

    Who has bought the EA or similar 3rd function valve kit? Trying to find out what brand valve it is.
  38. R

    For those using 3 pt sprayers ... PTO or electric?

    We are looking to get a 3 pt sprayer for hunting plots. Something in the 100-200 gal size.With a 12-18 ft folding boom. What are yalls preferences for a pto or a electric sprayer? This will probably get about 2 tankfuls a year run thru it.
  39. R

    Good or bad utility tractor models

    We are looking to possibly buy a 50-60ish hp tractor for a spare. Seeing lots of 5103 2wd no FEL with under 1000 hrs for around 9k. Been considering one of those. Any models in that HP range to steer clear of?
  40. R

    Ford 5610 help

    Trying to help a friend 60 miles away on his 5610 and Im not familier with it at all. He wanted to change his hyd oil said it looked milky. He drained about 15 gallons out of it and put plug back in. Went to rear of machine and pulled out the fill plug to right of seat and added 10 gal of...
  41. R

    Long 510 with FEL value ?

    Ran across a 510 in good shape with a factory loader. Any idea on what these are bringing used? cranks and runs fine. No leaks, PS is a little stiff other than that everything fine.
  42. R

    5045E pricing and reviews ?

    Got a deere dealer advertising $160 a month payments on a new 5045E ... figures up to about 10k with the 60 months. ive shot them a message to find out what the details of it are. For those who have bought a 2wd without FEL what was the going price and how is the machine? I am betting the...
  43. R

    L4600 adjustable lift arm link

    Ive seen them on some deeres and longs ... The right side adjustable arm has a crank on it, instead of the type with a jamb nut. Makes it much easier to level implements or angle them when not tools are required. Anyone know if they are available for a L series? I looked all the thru kubota...
  44. R

    Title for a tractor ??

    Had a out of state buyer ask me if I had the title for a tractor I posted for sale for a friend of mine. Alabama doesnt have such. Any of yalls state have titles on tractors?
  45. R

    B 275 value?

    gotta buddy who has a B275 hes wanting to sell. It hasnt ran in probably 10 years but did run when parked. Whats a fair asking price as is for one?
  46. R

    16" trailer tires on sale

    Wal mart has these on sale and some others if anyone is needing some 16" f range tires ... $89 each. order online and they will ship to store. Free mounting.
  47. R

    5610 Ford rear axle seal replacement

    Looked online but found nothing helpful as a guide to replacing a rear axle shaft seal. Anyone done one on this model before or have any tips?
  48. R

    Shear bolt to 6 spline adapter OR addon slip clutch Shear bolt to 6 spline available?

    Do they make a shear bolt (implement) to 6 spline adapter (driveshaft end) , or a add on slip clutch, shear bolt (implement end) to 6 spline (driveshaft end) ? I have found one listing for a add on slip clutch for about $100 thats describes itself as what I need but cant get in touch...
  49. R

    764 loader cylinder ... split gland nut

    Was moving some loose dirt with the loader today and noticed a drip on the front bucket curl cylinder. Thinking had a leak at the fitting. Stopped to ck it out and found the gland nut on the cylinder had split at the notch for the spanner wrench. Ive worked on heavy equipment and hydraulic...
  50. R

    Fair price for this disc ?

    Looking at what I think is a Rome TPS8 .... Whats a fair price for it? Will need all disc replaced for sure. I have enough off a old disc to put on it so wont cost any for that.