Search results

Results 1 to 22 of 22
  1. O

    year-round fabric cover for more delicate tools/implements

    Looking to make a cover for my sawmill and a few other less-weatherproof tools** which at least for a the next several years will be stored outside. I've tried tarps, but: with the relatively harsh & consistent sun we get they degrade faster than i'd like because they are fully waterproof (not...
  2. O

    pressure drop in relief valve (prince RV-1H)

    None of the "datasheets" for relief valves I can find seem to provide a flow-vs-pressure-drop curve. I'd like to know so I can verify the heat load & pressure loss I'm incurring here is acceptable. --- I'm modifying my hydraulic system to function with a grapple as if it were built into my...
  3. O

    Summit Hydraulics - reliability of parts/valves, support experience?

    I'm thinking of buying some valves from Summit, but this will be my first foray into real modifications to my (or any) hydraulic system. I have my head around what I need and generally what the options are (I think, famous last words) ... Summit seems to be one of the only games in town that...
  4. O

    source for D03 solenoid valve with "Deutsch Connector" (lower height/clearance)

    I need a D03 manifold & valves with slightly lower height. The common style with "DIN" connectors is typically about 6.5" tall - slightly too tall to fit where I'd prefer to mount it. The best option I've found would be these, with "Deutsch Connectors". The lower total heigh, around 5.5"...
  5. O

    D03 valve -vs- manifold flow rates, and series flow route

    Hyvair style D03 (ISO 4401) size valves&manifolds seem in common use for small TLB applications (summit kits for rear remote & port multiplier, w.r.long 3rd function kits). It seems that D03 spec valves are spec'd for ~16gpm or higher (plenty, my tractor has 7gpm) But all the D03 manifolds are...
  6. O

    why does using FEL stop Power Beyond flow

    My FEL completely cuts off the flow to the remaining PB. IE: when you're using UP/DOWN or CURL, rear remotes, 3rd function, etc cease all function. I understand this is ~universal. But why? here's the schematic from the manual (with some annotations to help, as these are hard to read if you...
  7. O

    why not run PTO chipper infeed from tractor power beyond, instead of separate PTO hydraulic pump

    I have a 6" pto wood chipper coming shortly. As most/all small units do, it has a dedicated PTO driven hydraulic unit. Various threads indicate this is roughly a 3gpm pump. My tractor hydraulics are 6-7gpm, and I'm obviously not doing _anything_ else with the tractor while the chipper is...
  8. O

    quick-couplers - when are iso-5675 compatible with iso-7241-1 (A?)

    Trying to identify the fittings on my tractor vs what came with an implement. I have two that seem extremely similar except the fluid-lock (ball, "poppet"). Some sites such as Incompatible Hydraulic Couplers: ISO 5675 (Ball, AG type) vs. ISO 7241-1 report some issues in cross-compatibility...
  9. O

    ck2610 - hydraulic pump specs & flow path

    have a ck2610. Happy with it (except for BH departure angle ... another topic). I'm making some hydraulic mods/additions and am not finding much specific information on the pump. Tractor is rated at 11.7 GPM. That is shared between the hydraulics, steering cylinders, and HST. Pump picture...
  10. O

    fix overpressure, sag: check valves, accumulators?

    I have two problems where I've seen advice on TBN to solve with a "check valve": a cylinder "sags" - eg, my snowblower chute deflector. Set it at the angle i need; a minute later the deflector has drooped down. a grapple can experience very high pressures when, say, it's closed on a long tree...
  11. O

    power beyond flow to 3rd function valve - before vs after the rear-remotes valve?

    I'm installing a power beyond. I'm asking this question from a generic point of view, as I want to understand the hydraulic system as much as I just want to get it done (I find that sort of understanding will pay dividends later). That said, my unit is a ck2610, with factory loader and dual...
  12. O

    Beware: kioti backhoe HORRIBLE departure angle ck2610 kb2475l

    had my kb2475l installed recently for the ck2610 i bought last year (backhoe took for ever to ship). I didn't make much of an issue with the geometry of the hoe as it's mounted on the tractor; driving my dad's small kubota CUT as a kid, he never took the backhoe off, and had no problem using...
  13. O

    bucket tooth bar: EA wicked root ("continuous tooth") vs standard tooth design

    will be using a 3pt blade to re-grade about a quarter acre area; its currently gently sloped, i needs to be ~level: some fill at the bottom, taking off about 8inches at top. Final cover will be mostly garden, with a driveway/turnaround on one side. We have ~easy soil (or i would not be...
  14. O

    chipper: heavier, 1000rpm flywheel better for smaller tractor? WC68, WM-8h, WC88

    Buying a PTO chipper. My rig is on the smaller end of viability with 21.7 pto hp. PTO lift is 1600lbs@2ft aft (also FEL + beet juice in all 4 wheels). My use case is primarily conifer (eg, soft), and mostly small (anything ~4" or larger becomes "firepit" firewood). The large input capacity...
  15. O

    failed locking pin on locking chain grab hook - am i doing it wrong?

    pretty new to chaining anything. For my grade70 chains i dedicated to my tractor's trailer, i bought 'locking' style clevis grab hooks because it makes setup a tiny bit easier (no dropped hooks before i get it snug), plus theoretically in a "bad event" where there was a some momentary slack...
  16. O

    nOOb to chaining down - is this sufficient?

    The kioti finally arrived! This is my first time using chains, and securing something besides a car (wheel straps) regardless. I've searched and watched the YouTube's to no avail Are my rear chains OK here on the axle? Until a big pin shows up in the mail I can't attach to the draw bar. My...
  17. O

    W.R. Long 3rd function kit -vs- OEM

    I'm not finding much direct comparison between WRLong third functions and OEM kits. I am considering installing it myself (mainly to learn more about maintenance). Both kits are virtually the same price. I'm on a kioti, and the instructions are from what i read - but i care more about...
  18. O

    oem-kioti -vs- WRLong 3rd function kit (CKA162)?

    I am 90% going to buy a grapple next spring. So am considering adding the factory 3rd function before the tractor is delivered. It's about $1200 installed (2/3 parts, 1/3 labor). I'm pretty mechanical and can install my own (although given reviews of the CKA162 instructions its worth the...
  19. O

    48"/4200# vs 42"/2200# Construction Attachements / EA forks for CUT

    Thanks for your collective patience; "what forks to choose" has certainly been beat into the ground in various ways, but after searching and reading I still don't quite understand :) In particular the affect of implement weight on 'practical' lift (as a lot of the weight difference is in the...
  20. O

    how deep can I run a subsoiler (for running pipe) with ck2610

    hoping to get my water line run to my wellhead before the ground freezes more than an inch or three ... I have a ck2610 on its way, with backhoe and FEL (so ~~4000lbs), industrial tire tread. Its arriving 1st of November, so in my area it's be close, temperature wise, for the days to fully...
  21. O

    ck2610 mid-pto cka113 install question

    Just bought (due in November :( ) a new ck2610 (woot). I will use a snow blower, but haven't decided front or rear, yet, and since i won't take delivery until winter, I probably won't be able to make up my mind this year. Rear leaves the bucket (helpful) but requires taking off the backhoe...
  22. O

    clamp on pallet forks (& no qd) - vs qd bucket + qd forks on kl4030/ck2610

    Just bought a ck2610; thanks for all the TBN threads that helped me make the call on that. Haven't "owned" a tractor since using my dad's in the woods growing up, couldn't be more excited :) anyway ... I ordered it with the kl4030 (standard loader on the ck2610) with the quick-release 66"...
 
Top