Search results

Hey Asteral , maybe I didn’t understand your answer but do you mean a 2015 is considered an older model ? I know it’s early to ask but is it going to get hard to find parts for our tractors ?

Thank you that is excellent information 👍

I am not a welder or very knowledgeable about steel but doesn’t that broken piece look like lower quality steel , looks like cast iron water mains I used to repair , just askin.

That is a great dealer , could have been a long stretch to get it back , splitting a tractor is a big job , I am very fortunate to have a great dealer in Daves Tractor in Red Bluff Ca . Good 4 u

Yes I got burned twice at a local experts shop ,took it to Daves tractor in Red Bluff and never had any problems , they have the expert mechanics.

Not everyone has a hoe but when I know it’s hard compacted soil or base or road grinding I just loosen it up with my hoe then it digs easy

Me too lol and many years ago I used to build them, I thought it was a legit question

I don’t think that’s cheating at all , that’s smart because I popped a hyd cylinder on my hoe trying to force it , that old beater chain is much cheaper than a hyd cylinder, smart thinkin

Just curious, how much for the re-built alternator

Boy that is a beautiful field , you must have put some hours in to make it look like that, awesome

Nice job

Update , Found out what I thought was a left rear e - brake noise on my 2400h, had my tractor at Daves Tractor in Red Bluff “ nor Cal” Ca for a warrenty issue , Jarred in the shop stood by my tractor while I ran it in reverse , he picked up the noise right off , he grinned and said Dan that...

Had good luck with Dupli - color bright red from who ever carries it in your area ,Worked good for me

Anytime 450 , Good time to hook up led rear lights too , I hooked mine up to the front work lights switch , upper left side “on mine” , works slick , Dan

Hey 450 , Mine is a 2018 cab , I had a heater hose leaking and I just unbolted it from top- side, they are bolts with a shoulder on them and about a 1” or so SS washer and a rubber grommet with shoulder on it , I hooked up my rear led’s for my BH also was an easy way to access above headliner...

LOL, That’s funny as h—- , I didn’t even notice this was first posted in 2018,Dan

Grind a slot in it , use a big standard screw driver with 6 or 8 sided shank then use pipe wrench or vice grips has saved me on occasion, good luck

Alien, Bet your very proud ,congrats to her, that is a monumental accomplishment, both of my daughter in laws went through that program and it takes dedication , drive and hard work, Dan

Thanks Asteral , I was incorrect, the oil leaks looks like the main seal off the bottom pulley, off the crank shaft , I had a flashlight and looked up in there and it’s dripping a drop about every 30 seconds , I called my dealer and they said if that’s indeed the problem then the warranty will...

Hey guys , I have 2 issues , I have a small oil leak where my drive line connects to front end , also I have a odd noise only in reverse at left rear wheel , is this considered a drive train issue, covered by warranty? I'm not sure but it appease to be a seal issue , I'm no tractor mechanic by...

Re call, Mine is a 2018 model 2400 and I did get a letter, I will leave it as is , I don’t push it but I was lifting some good size logs with my EA 50” grapple this summer clearing my property. My 2400h w/bh did an awesome job installing water lines , septic system,road and clearing brush, very...

Thanks guys, appreciate the info , Dan

Did anyone ever get contact info .?

Thanks guys, I will definitely try some of these options ,I do appreciate all the input, thanks Dan , and yes I do have the type of coupler with the little popit on the end,

Hey guys , I know it’s not the tractor and it’s not the grapple , I must be doing something wrong . When I first got my Grapple and third function put on I could switch back and forth the bucket and grapple no problem,and yes I do move the joystick all 4 ways and the buttons on the 3rd function...

Moak, Yes I do have the float position , plenty of room , DAN LAMB

Hey Moak , K5 was correct about the cable loader set up on the loader it’s what is on my 2400h w/cab, it has a bracket off the cab to anchor it, Dan

Hey Bob , I thought he ment tweek,Dan

Hey fever, That artillery is classic, I think it's awsome , appears you have a great sense of humor and imagination I salute you , Dan

Anytime oldnslo , I didn't know they existed till a month or so ago , this volcanic ash I'm working in is real bad , I will opt to use them ,glad I could help ,Dan

Hey guys, Finally got back up to my property , and want to let you know both filters fit perfectly, wished I had known this 3 years ago when I bought my tractor , will be using them from here on out , thanks guys , Dan

Hey Chief , I got mine in April , after 6 weeks but it was worth the wait , it cuts through native soil like a knife and rips small sapilings and under growth out you'll be glad you waited ,regards Dan

Hey guys, There were no stickers on my air box but like I said I just went off the Donaldson filter ,when I get it and check for fit I will report back , Dan

I have the Bxpanded Piranha tooth bar , it cuts dirt very good , I leave it on all the time, I can grade , dig and back drag my driveway, the step bit they send wit it worked good, cut easy

Good choice , I have the EA 50” with the removable tines on the bottom , makes it 254 lbs , with tines installed 274 lbs can’t see any way I will ever damage it at 26 hp and don’t see how much more hp would ever damage it either it’s built like a tank , it will get a lot of work done for you ...

Hey guys , From my research I found that the original Box or as they call it the “G042544 Donaldson Original Fpg Radial “ takes a P822686 outer air filter , inner or secondary filter is 535396 , this comes in a set I ordered on Amazon for $ 26.49 , this is very cheap insurance and protection for...

Hey Moa , No problem, I will be back at my tractor Tuesday and Wednesday, I can take some pictures with tape measure for reference, can I get your cell # because I don't have computer way up in the mountains off grid but my phone works ok most of the time , Dan

Ptsg , that info is awesome I appreciate it very much , I am going to research that when I get home, now I know how to start the process , again thank you , Dan

Hey Moak , I have the 2400h , I can take some measurements on the cab and tractor if you want but I agree the size of the tractors don’t match ,Dan

Good afternoon all, My 2018 2400h comes with a single air filter and I was wondering if anyone has or knows of a way I could get a double filter with an outer and inner or a secondary filter set up , Reason for my asking is because I am working in a very dusty environment on my property, the...

Awesome idea , I have the 2400 Branson and ok welding skills but the idea and concept are great and thanks for the video , Dan

Dang I pad ,to continue- move it for a couple days then fired it up ! No noise , l still think dust was the culprit and hope I dodged a bullet, thanks, Dan

Up Date on e brake or left rear tire - hub noise, I checked wheel nuts all tight , jacked tractor up spun wheel and could hear noise a little , I lowered to ground to pull wheel off to get better look , I put my socket with breaker bar couldn’t budge any of them , so I saw a void where casing...

Asteral, Thank you for the info , I ‘m not real knowledgeable on Diesel engines but is the procedure mean they de-tune the engine which I have read some guys discussing, thanks ,Dan

That thing is sweet , I can’t believe what thought and engineering went into that , I wouldn’t even know where to start , nice build, Dan