Search results

Results 1 to 27 of 27
  1. D

    Drive train warrenty

    Hey guys , I have 2 issues , I have a small oil leak where my drive line connects to front end , also I have a odd noise only in reverse at left rear wheel , is this considered a drive train issue, covered by warranty? I'm not sure but it appease to be a seal issue , I'm no tractor mechanic by...
  2. D

    Hydraulic connections won’t go on Grapple

    Hey guys , I know it’s not the tractor and it’s not the grapple , I must be doing something wrong . When I first got my Grapple and third function put on I could switch back and forth the bucket and grapple no problem,and yes I do move the joystick all 4 ways and the buttons on the 3rd function...
  3. D

    Branson 2400h air filter

    Good afternoon all, My 2018 2400h comes with a single air filter and I was wondering if anyone has or knows of a way I could get a double filter with an outer and inner or a secondary filter set up , Reason for my asking is because I am working in a very dusty environment on my property, the...
  4. D

    E break noise I think?

    Hey guys , I am hearing a noise coming from my L rear tire wheel area , when I first got my tractor I left the E break on more than I would admit but it the noise is in sync with wheel rotation and I am working in a very dusty environment. Should I take wheel off for inspection and cleaning ...
  5. D

    EA wicked grapple on 2400h

    Got the wicked 55 grapple 2 weeks ago 255 lbs and it goes to Daves Tractor Thursday to get 3rd function valve installed , Jarred in the shop said they will install a Ansung. Do any of you guys have one - comments ? My son and I have decided to purchase a Woodland Mills saw mill , grapple should...
  6. D

    EA 50 waiting 2 years

    Finally after reading hundreds of posts I ordered a EA Wicked 50 single lid , it has removable slats on bottom to bring weight down to 255lbs , 274 lbs with slats , there are many good grapples but the weight was my main concern . I have the Branson 2400H w/backhoe , I have literally looked at...
  7. D

    Dealer support top notch

    Hey guys , So many of you have said Dealer Support is very important, yes it is and I know why I chose Daves Tractor in Red Bluff Ca and a Branson , long story short . Had a hydraulic cylinder leaking bad . Called Daves they said around $ 200 , called local shop $120- $130 whow huge difference...
  8. D

    Backhoe crowd cylinder spraying

    Hey guys, I have the BH66 backhoe on my 2400h Branson , I was digging up a stump and was pushing it to itç—´ limits at about 2300 RPM and the crowd cylinder started spraying hydraulic fluid , it has a small bulge of rubber where it was spraying so I immediately shut tractor off , and I know I...
  9. D

    Tree grubbed

    Tree grubber , Any of you guys ever use one of these ? Looks like it would just rip the bark off the tree , only bad thing is I would be on and off the tractor dozens of times in a short while because I always work by myself . I have hundreds of 2” & 3 “saplings on new property , anyone have...
  10. D

    Backhoe slow,sluggish and loss of power

    Hey guys , I was running backhoe today and noticed it was a lot slower and a noticeable loss of power , I usually run about 18-1900 rpm and it reacts good , was at 22-2300 today and not good power or responsiveness, I am about 20 hrs over on my hydraulic oil and filters change could this be the...
  11. D

    Insurance Inland Marine no more Quarterly Payments

    Hey Guys, I have been making Quarterly payments to Inland Marine CHUBB for 2 years , now they want $465.00 in one chunk , no more Quarterly payments . Was hoping to get some names of companies that would cover my tractor only , my homeowners will not cover tractors , thanks gentlemen any...
  12. D

    ADD-A-Grapple ??????

    Hey Gentlemen , Have been looking at the grapples for a year and have made a choice on a Wildcat grapple , but I see the add-a -grapple advertisements from some company痴 products-attachments do any of you guys have one what痴 your pros - cons have not seen any posts on them , Thanks , Dan
  13. D

    Cab door pops open

    Hey gentleman , I know this is very minor but is so annoying, my left door latch will not hold door closed has anybody else had same problem with cab door ,still under warranty,Dan
  14. D

    Air Filter microns to high

    Hey guys good evening , Was asking my dealer what the micron count was for my 2400h , he said 4-5. My filter is only a single stage filter, was talking to a friend of mine and he says that痴 not good he uses 1-2 after market air filter on his Kabota single stage filter , but if I use anything...
  15. D

    Warrenty work l deliver or they pick up

    Good morning , I own a 2400h , 1 year old , bought IT new . I really like my dealer but I have read that the dealer will come pick up if IT is fault of Branson Factory . One of my tie rod ends was put on with only 3 threads holding IT on and IT stripped out and fell off , the other side was...
  16. D

    Remotes or just B-hoe lines

    Good evening I have a Branson 2400h with a frame Mount back hoe , are the two lines feeding the b-hoe just for the hoe or are they remote or auxiliary lines . My hydralic knowledge is limited . Thanks Nor Cal Dan
  17. D

    Some one been there and done This

    Hey guys , I will be getting a grapple and a Third function valve but not for a couple months , for now was going to Get 11/4鋳 steel tubing and bolt 3 pieces on my bucket and weld a couple of out riggers for more support to pick up brush piles .I have small piles everywhere on my 2.5 acres...
  18. D

    2400h , hope no damage

    Good evening TBN`ers I hope I didn`t mess my Tractor up , I have a 2018 Branson 2400h , The roads are slushy with some dirt showing and the road was on a slight down grade I had hst in Hi with IT in 4wd and IT started makin a pretty bad sound IT was not like a grinding sound hard to...
  19. D

    B Hoe controls out of wack ck20

    Good evening , I have a friend that just bought a 2006 Kioti CK20 , We were looking at HIS new to him the other day and he asked me to Get on the b-hoe and SEE how the controls felt because he thought something was out of adjustment, I have a 2018 Branson 2400h TLB and he wanted me...
  20. D

    Diesel Generator off grid

    Good afternoon gentlemen, I live off grid in Northern Ca and I am in the prosess of building my Solor System , this is my starter system for now AS we are moving in 2 years, a magnum 4024 lnverter, with magnum mini box ,Outback charge controller to be purchased ...
  21. D

    Frozen very worried

    I live in northern California at the base of Mt Shasta completly different world than most of the state , so far this winter we have had about 42 in of snow, my 2018 2400h TLB has done a great job with moving snow , we live off grid and dont have the solor completed yet just have to set the...
  22. D

    Branson 2400h oil filter super tight

    Has anyone tired to Get the oil filter off for the first 50 hr oil change ? Branson 2400h There is barley any room to Get any type of wrench on IT .Mine is so tight I broke my oil filter wrench , today I bought 3 different type of oil filter wrenches to try , a strap wrench , a 3 finger wrench...
  23. D

    Branson 2400h step

    My Branson2400 TLB w/cab didn’t ome with stock step for the cab so I built one , at 62 and with a tired and beat up body after climbing in and out of the cab many times in a day IT gets to be a bear . I have read a few posts on steps which was very helpful. I got 2 pieces of conveyor belt that...
  24. D

    Dwight Clark passing

    I was very saddened to hear of Dwight Clarks passing , he wasen’t a personal friend but he was the same age AS my father . 61 years old is to young , I remember sitting and watching 49’er games with my dad and the day he made ォ the catchï½» we watched that game together Which started the great...
  25. D

    Tires 2400h 50 hr fluid change and bolt check

    Good evening TBN members, New tractor ownerhere I have all my filters and fluids for my oil changes and I was going to go all around my 2400h TLB and check all bolts ,my tractor is at our place in MC Cloud Ca and we live in Redding Ca .I have to travel about 100 miles to Get there . I have some...
  26. D

    Loader Grapple Specs look good

    New member here, I have been lokking at grapples and researching them for months and I think I finally found the perfect FIT for my 2400h with BH and cab , Everything Attachments just recently came out with a 50 inche single cylinder open bottom grapple with removeable tines on the bottom for 10...
  27. D

    OL guy first tractor

    Awsome Tractor site , I just joined today and feel very Lucky to be able to tap into such a vast amount of knowledge and experiance with tractor repairs , farm and construction experiance . In Feb I bought a Branson 2400h , this is the most expensive work «and play»tool I have ever bought. I...