Search results

Results 1 to 12 of 12
  1. swampy6

    UTV/RTV Pull Behinder Sanders

    We have a sander for the Mahindra 4540 3 point, I'm looking for a company that makes a sander to pull behind a UTV or RTV, if something happened to me this would make it easy for the wife. Thanks
  2. swampy6

    RTV - X1100C

    We're looking at the Kubota RTV - X1100C, we live here in the Foothills of the Adirondacks with some nice hills. We have a 2007 Rhino Special Edition 450 with just over 7500 working miles on it and never had any problems getting up the hills, how do you think the RTV - X1100C will do? Also what...
  3. swampy6

    2638 Mahindra with Cab and FEL

    We have a 2016 Mahindra 4540 with a backhoe with just over 1000 hours on it, I was just wondering what the trade in value would be if we were looking to buy the 2638 with Cab with A/C and heat. I had a worker from the local Mahindra dealer tell me our 4540 is in excellent shape, it's never been...
  4. swampy6

    Possible Trade for a new Mahindra 2638

    I'm thinking about trading in our 2016 4540 with the backhoe for a Mahindra HST, I haven't had any problems with the 4540 but it would be much easier for the wife driving an HST, we have 933 hours on it most of that has been plowing the driveway and trails. How is the 2638 or any other Mahindra...
  5. swampy6

    Possible Trade

    I'm thinking about trading in our 2016 4540 with the backhoe for a Mahindra HST, I haven't had any problems with the 4540 but it would be much easier for the wife driving an HST, we have 933 hours on it most of that has been plowing the driveway and trails. How is the 2638 or any other Mahindra...
  6. swampy6

    Mahindra 4540 Zerk Sizes

    All the zerks I sized with a Grease Fitting Thread Tester, Type Gage from Grainger were a Brass Metric M8 X 1.25 into a steel pin, Grainger has the same size zerk but in a zinc plated steel. I ordered some so I could have extra since my dealer didn't have the size in stock, the threads are the...
  7. swampy6

    Looking For A Sander/Spreader

    We're looking for a sander/spreader for our tractor, the 3 pt is 31 hp. Something with a poly hopper/tub or something we can sand the driveway that we can pull behind the rhino.
  8. swampy6

    SnowPlow Blade Flap

    I'm looking to buy a snow deflector for the top of our snowplow, what's everyone using and where is the best place to buy one?
  9. swampy6

    Fairly New From The Foothills of The Adirondacks

    Hi, This is our first tractor so I decided that it would be a good idea to join a tractor forum, so far the Mahindra 4540 has been trouble free but if I do run into anything then this will be the site I ask my questions. I don't think I posted here when I joined but if I did, please excuse the...
  10. swampy6

    Mahindra 4540

    Just some digging of two stumps that came out together and then moved with some pallet forks. I did get about four small loads from our small sand pit. I think the 4540 has just over 230 hours on it, we've had it for 14 months.
  11. swampy6

    Snow Removal with the Mahindra 4540 4 WD

    Last winter was our first winter with a tractor which we used for plowing the driveway and trails leading to our wood stacks, our biggest snowfall was 22 or 23 inches overnight which the 4540 walked through without chains but the back tires are loaded (correct term?) with beet juice.
  12. swampy6

    Mahindra 4540

    We bought the Mahindra 4540 about 14 months ago along with the backhoe, so far the only things it needed was a code update and one of the clamps needed tightening to stop a small antifreeze leak. I've put in enough trails around the house for walking and the UTV but since getting the 4540 we've...
 
Top