Search results

Results 1 to 35 of 35
  1. C

    New LSMT335H......What brand of antifreeze do you guys use?

    Going to jump in here. My XR3135 calls for ASTM D5216 which seems to be non existent. Is D6210 equivalent?
  2. C

    XR3135 rear tail lights

    Had a burned out brake light. Turns out bulb was broken because the plastic locking ring is destroyed. Seems like the heat made it brittle. Anyone have a wiring diagram that shows the part number the wire harness for the tail lights? Just the last foot that splits aft the disconnect. (XR3135HC)...
  3. C

    45-60HP with cab, heat, air, fel, and front snowblower - who makes and how much?

    My dealer converted this Pronovost Puma to a loader mount.
  4. C

    Cab owners - several questions

    I know some of this has been posted somewhere but I haven't been able to find it. - What is the size of the switches on the side post? - Anyone that has mounted a light bar under the front (or back) eave. Plastic seems flimsy to just drill and mount to. Use a strip of metal on backside to...
  5. C

    Snow Equipment Owning/Operating Pictures of your snow weapons

    Just added the snow pusher this year for light jobs. I'll use the blower for the bigger stuff.
  6. C

    Buying Advice Purchasing a new tractor

    Dealer converted this Pronovost Puma rear mount to a loader mount. Works great. PTO driven hydraulic pump and aux tank on 3pt.
  7. C

    New LS Sub-Compact

    I thought it did but maybe not unless its an option. Here are a couple of pics from my dealer, he had 2.
  8. C

    Pros/Cons of Front Mount Snowblower vs Rear Mount

    I have not had a rear mount blower but I have had a PTO driven front mount and this I purchased a new tractor and had them build me a loader mounted blower from a Puma rear mount. First the PTO driven one was on a John Deere 2210. It was a pain to put on and take off. Put the mounting bracket...
  9. C

    John Deere GT262

    Any info on this mower? Good, bad, any reliability issues? Thanks.
  10. C

    Cub Cadet XT2 price question

    Looking at a used 2015 XT2 LX46 with the Kawasaki 21.5hp eng. 50 hours on it. Stamped deck. Looks clean. Asking $1500. Good price?
  11. C

    New LS Sub-Compact

    See LS got into the sub-compact market with the MT1. Comments
  12. C

    Question for those with cabs

    This is the plug on the beacon. That's the port.
  13. C

    Question for those with cabs

    Anyone ever find a place to get the plug and pigtail that would go into the spot for the beacons?
  14. C

    Snow Equipment Owning/Operating Pictures of your snow weapons

    Here is the motor they added to the blower. And the PTO pump.
  15. C

    Snow Equipment Owning/Operating Pictures of your snow weapons

    Just got my new Pronovost Puma 64 that was modified to loader mount.
  16. C

    XR3135HC ordered

    Looks like LS added a lever to move the 3pt from outside.
  17. C

    XR3135HC ordered

    Here are pics of the blower they converted.
  18. C

    XR3135HC ordered

    Arrived today.
  19. C

    XR3135HC ordered

    I really tossed the size of the blower around for a long time. The dealer has been putting Lynx 62 blowers on the front of these with good results. I wanted something wider and was going to get the Lynx 70. At the last minute I decided I really wanted the little extra durability of the Puma so I...
  20. C

    XR3135HC ordered

    Well finally pulled the trigger on a XR3135HC. Loaded tires, radio and adding bucket hooks. Also will be getting a Puma 64 snowblower which they are converting to be loader mounted. Will post some pictures when it comes in. Thanks for all the info that is posted here. This has been a 2 year...
  21. C

    2210 real axle seal

    Anyone have to replace a rear axle seal on a 2210? I took it into my dealer to have it replaced and was told its a 2 and a half hour job. (Told this 2 times, the second time after they had determined what needed to be replaced and had the parts on order) Only to get a call a week later telling...
  22. C

    LS at the Louisville Farm Show

    Spoke to the rep at the Louisville Farm Show today. LS built engines will start being put in about June in tractors greater than 25HP. They are common rail fuel injected and will have about 3HP more in each tractor than the current engine. They also had the new XR3135 there, Pics are posted in...
  23. C

    New XR3135 at Louisville Farm Show

    Stopped by the LS stand at the Louisville Farm Show and they had a new model, the XR3135. I believe they said its 32HP. Looks just like the XR3037. The sales rep was from the NC office. He said they are switching to the LS engines in June. The 25HP and under will not change. The engines greater...
  24. C

    Canopy Switch

    This one? Looks like a 2 position momentary switch. Up looks like to force a regen and down to stop one. I don't have a manual but that's what it looks like from the picture from the LS website. They have it labeled as the DPF switch.
  25. C

    Loader mounted blower

    I was also back at Cabela's and here are more pictures of the Sheyenne Toolings model. (not sure I like all the hardware just for the chute rotation) Extra filter hardware on loader arm. PTO pump
  26. C

    Loader mounted blower

    OK here are the pics from the dealer modified blower. If you look in the bottom left corner it does say HARDY, so I guess my assumption is correct. The cylinder for the chute rotation was removed.
  27. C

    Loader mounted blower

    I've been on their website several times. Sheyenne Tooling & Manufacturing They have a couple of videos. All the hydraulic fluid used to run their blower comes from the tractors system. They tap into your tractors system. That's the difference between theirs and all the other systems I have...
  28. C

    Loader mounted blower

    Not sure if anyone has been looking for a loader mounted blower, but, I was discussing one while looking at a new tractor. Turns out one of my local dealers in western NY custom builds them. He gave me a verbal quote of $4500 for a 72" loader mount snowblower with 3pt hitch power pack and rear...
  29. C

    Trailer tire clearance

    These are the old tires but it looked the same unloaded.
  30. C

    Trailer tire clearance

    I have a 7500# trailer. The concern I have is that I have noticed that it does not seem that there is room for full travel before the tires will rub the fenders. I just replaced the tires, same size but upgraded from C range to D. The tires do extended slightly outside the fenders. When fully...
  31. C

    What kind of boards to use to build sidewalls on trailer?

    Here is what I did. Used PT 2x4 for posts and deck boards. Bolted together. I have an 18' car hauler so it is actually in 5 pieces so I can actually lift them by myself and I didn't have to splice. I used hasps and hitch pins to secure together at corners.
  32. C

    Show your trailer sides

    Thanks for all the ideas here. Finally got mine done. Will do something for the end later.
  33. C

    Anyone heard of Bray trailers?

    I recently picked up a 2003 18' Bray beavertail car hauler. Haven't found much information online about this brand. Anyone know anything about them. Seems to be well built and in very good shape. Tag says it was modified at Canadian Tire and everything is metric so I assume it was purchased in...
  34. C

    2210 U-Joint

    Has anyone had to the u-joint between the transmission and engine fail on your 2210? I have 488 hours and the mechanic said that this is starting to be a common problem. About $600 fix since they have to tear the machine apart to get to it. Apparently this has been changed on the 2305 where you...
Top