Search results

Results 1 to 200 of 469
  1. thclimer

    Massey Ferguson 1740M Hydro: LOSS OF POWER when hot!

    He mentioned that it was in its last year in another thread post #9 Oil & Fuel - 1740m hydraulic filters (HST)
  2. thclimer

    Massey Ferguson 1740M Hydro: LOSS OF POWER when hot!

    The darkness to me is a bit concerning as unlike your engine oil I don't think there would be any contaminants that would make hydraulic oil dark, other than if it got too hot at some point. I'm going to be very interested to hear how your first run on this new fluid goes.
  3. thclimer

    Massey Ferguson 1740M Hydro: LOSS OF POWER when hot!

    "Like a warm shower" doesn't seem very hot then. While I don't have a lot of experience with hydro oil doesn't that look pretty dark? Is what you are putting in more clear? With your new fluid it will be interesting to see if after running for a while, 40+ min if you experience any sluggishness.
  4. thclimer

    NH TC30 Stalls When removing Parking Brake or taking it out of Neutral

    This is my guess, while you have "jumpered" the seat switch I'm thinking there is still a issue possibly with its wiring as its acting like your not in the seat.
  5. thclimer

    Bent Loader Rod (Mahindra 2545)

    Here is a video which shows what you are dealing with: If you can't get the rod/piston out I've seen people use a come along winch to pull them out.
  6. thclimer

    Massey Ferguson 1740M Hydro: LOSS OF POWER when hot!

    If this truly is a heat related issue I wonder if you could use a inferred heat gun to try and determine the transmission temp during your 40 min test runs? 40 min sure seems like a long time to me but maybe the transmission has enough heat mass that it takes that long for everything to warm...
  7. thclimer

    Oil & Fuel 1740m hydraulic filters (HST)

    I agree, I would definitely only use AGCO products while under warranty.
  8. thclimer

    Oil & Fuel 1740m hydraulic filters (HST)

    Here is a thread on a user of the Chevron THF who mentions it fixed his heat issues: Massey 1758 Hyro Transmission Oil Issues
  9. thclimer

    Bending my box blade hitch, please help!

    Chris, can you confirm that you are lifting your box blade off the ground while making a turn? It sure seems to me that if the box blade and its scarifiers are engaged into the ground and you make a turn some extreme lateral force is going to be placed on the plate in the picture which is bent.
  10. thclimer

    Dead 1130

    If the old battery was still connected in the circuit it was most likely sucking all the power from your jump pack. Additionally, if it sat in shed for that long I'd be looking for mouse destruction, chewed wiring, air cleaner packed, etc. What did the fluids look like, fuel/filter, oil...
  11. thclimer

    Stihl or Echo top handle saw?

    Another vote here for Echo. While not as low cost as it used to be the CS-2511 with aftermarket Egan straight pipe is a little beast. Echo 2511 pipe
  12. thclimer

    Starting problem gc1723e

    Have you checked your battery? A easy check is to measure it voltage but the most definitive test is a load test which many auto parts stores will do for free. If the fuses blew when you were changing the alternator it sounds like something got shorted which could mean there are other...
  13. thclimer

    Oops

    Oh my, nice that you have a good neighbor.
  14. thclimer

    TC45DA Electrical Plugs

    Here is the location of the flasher module:
  15. thclimer

    TC45DA Electrical Plugs

    What are you having trouble with?
  16. thclimer

    TC45DA Electrical Plugs

    This might help:
  17. thclimer

    Pull down a high widow maker.

    How to burn a wet slash pile:
  18. thclimer

    Gas Proof Plastic Repair Sealant?

    There are a number of sealants rated for gasoline here is one from a company that I like: PC-SuperEpoxy® – Protective Coating Company
  19. thclimer

    TC30 Starting Problem

    If your ignition switch has a connector labeled as any in the attached it may help for testing. NAPA sells a much more beefy switch. I replaced my TC33D OEM switch which had melted with a NAPA and have not had any problem since 15+ years now.
  20. thclimer

    MF 1742 Cranks but wont start

    Sorry, I'm no help for identify where the priming pump is. Maybe someone could turn the key with you by the engine and try to listen for where the noise is coming from?
  21. thclimer

    MF 1742 Cranks but wont start

    I think it has something to do with the fuel pressure sensor, I'd be looking for some loose wires around your fuel lines:
  22. thclimer

    Pull down a high widow maker.

    If the crowns are broken off like the tree in this picture there is no saving it. It might live for a while but the other trees would benefit more from its removal. However, its removal can be challenging. I'd probably wait to see if the broken branches will fall out on there own before I'd...
  23. thclimer

    GC1715 Neutral Switch

    Wow, I can't believe the rust! Was it used in a salty environment, moving salt piles or on a beach? Looks like you have some work a head of you, good luck.
  24. thclimer

    What happened here to my tire?

    Make sure you video this method if you use it and then post it here!
  25. thclimer

    1260 doesn’t shut off

    Hopefully others with more insight will reply, below are some threads you might want to refer to: https://www.tractorbynet.com/forums/threads/mf-1260-will-not-turnoff-when-key-is-in-the-off-position.307120/ https://www.tractorbynet.com/forums/threads/mf-1240-wont-shut-down.153046/
  26. thclimer

    Really need your advice whether my daughters car is safe to drive or not as she needs to return to school later this morning

    If you looking for something relatively low in cost I'd recommend this one: BlueDriver BlueDriver It works with your smartphone and the App gets update. Based on the code for your car it will give you possible fixes and if they are a know issue with your specific car.
  27. thclimer

    Water in fuel causes $10,000 damage to my Kubota Grand L6060

    Have you ever thought of a Mr. Funnel? They can be a little slow but if you purchase the largest size it has a higher flow rate (15gpm). There is also always some fuel left over in the bottom of the funnel that needs to be dumped. They also filter any sediment. It may be a quick solution...
  28. thclimer

    TC25 Glow Plug Operation

    My TC33D utilizes a timer for the glow pugs and as tmeric7 indicated they are also energized during the engine cranking sequence. If this TC25 did not come with a glow plug timer I think I'd go with the push button option. The only thing I'd be curious about is how long to energize the glow...
  29. thclimer

    TC25 Safety Switches?

    Sure sounds like someone did some modifying there.
  30. thclimer

    TC25 Safety Switches?

    The OEM ignition switch on my TC33D was a pretty flimsy design and failed. I replaced it with a more robust one from NAPA. I wonder if yours was replaced at some time? TC33D Glow Plug Problem Fixed There also could be some variation withing the TC25 series so the schematic which supplied...
  31. thclimer

    TC25 Safety Switches?

    I hope these help.
  32. thclimer

    Stihl 261cm hard starting

    If you watch the following Youtube video within the first 45 seconds he shows how the coke flap is supposed to work, while it is not your exact saw model the concept is the same, you have to remove your air filter to see the choke. Did you reset your saw or your dealer? Similar to the fuel...
  33. thclimer

    Oil & Fuel L2502 smokes really bad at cold start

    Your homemade cab is not pretty, but if its functional that is what counts. Blowing snow in your face or down your neck is never a fun time!
  34. thclimer

    1742 regen

    Why not just block off part of the radiator like your dealer did using something more permeant than cardboard?
  35. thclimer

    Stihl 261cm hard starting

    Have you checked your spark plug? My 261CM starts on the 2nd or 3rd pull. The only time it didn't start the fuel solenoid had failed. My solenoid was a black colored one, it was original. As I understand there are only green and white ones available. I replaced mine with a green and it...
  36. thclimer

    Need some home heating feedback: Wood boiler or fireplace insert?

    I don't there is any fire place insert that could compete with a wood stove for heat output.
  37. thclimer

    Just got a 1739E, what are these two symbols?

    If your not going to use your tractor for a minute or more I'd just shut it off. If you want to be parked and run at 2,000+ rpms I guess you could but why not just shut it off? If your running a 3-Pt implement like log splitter I'd run it above 2,000rpm.
  38. thclimer

    Just got a 1739E, what are these two symbols?

    Oh my, with a tractor that has a DPF system you don't want to idle anymore that you have to as that is when the most soot is created. I'm sure a manual would add some clarity in its proper operation for you. My 1736 has a soot meter (bars) that you can view in the menu. When it reaches 5...
  39. thclimer

    No power after battery change on New Holland Workmaster 33

    This has me suspect: You need metal to metal contact. Take your volt meter and check continuity from the negative battery post to some other bare metal on your frame. If your battery tested good it should at least have enough power to energize your dash lights.
  40. thclimer

    TC33 Injection problem

    Welcome to TBN Fletch95. Unfortunately Jinman is no longer with us. He was a wealth of knowledge and many years later people like you still find his posts useful. How long have you had your TC33D? Mine is going on 20 years and its been very useful, never regret buying it.
  41. thclimer

    PRIME PRE-FILTER MF 1840

    It sounds like the 19mm bolt you opened is similar to what I was referring to as the vents on the top of my housings. In my case I have to use the plunger to push diesel into the housings to bleed the air out. However, in your case once you opened your "vent" gravity was able to purge the air...
  42. thclimer

    PRIME PRE-FILTER MF 1840

    Well that's discouraging. Does your manual give you any advise on priming?
  43. thclimer

    PRIME PRE-FILTER MF 1840

    My Massey 1736 has a primer plunger on top that you use to purge the air out of its filter housing and the main filter housing by cracking their vents.
  44. thclimer

    New MF GC1723E owner. What next?

    Diesel fuel treatment for the northern climate is a must. Everyone will have favorite brand. I like Hot Shot's Secret Diesel Winter Anti-Gel.
  45. thclimer

    Well… that was stupid…

    Wow the motor too! I thought it was just the blade.
  46. thclimer

    Well… that was stupid…

    Ouch, sorry to hear that. If your interested in safer type of saw there is a brand of table saw called "SawStop" when it detects a something like a finger it immediately stops the blade by slamming an aluminum block into the blade. I think it senses something conductive and the blade is...
  47. thclimer

    Tc40 front axle venting

    I've often wondered this question as well about dip sticks which thread into a hole. I have read manuals that say you screw while others say to rest it on the threads, couldn't be more confusing. The manual for my TC33D says the following: NOTE: To obtain correct oil level reading do not...
  48. thclimer

    Kubota B3350 wont start.

    Each stroke doesn't use that much fuel. If you are seeing fuel at the injector when the line is cracked I'd think it would at least run rough. Maybe others can advise how much you should see coming out.
  49. thclimer

    Kubota B3350 wont start.

    If you were able to get fuel flow to an injector then the solenoid was opening. If you still suspect it, crack a fuel line to an injector to see if you have fuel coming out when cranking.
  50. thclimer

    Kubota B3350 wont start.

    If its "periodically firing off" this sounds like a fuel problem to me. Typically when I read about a diesel tractor not starting its one of the following: Fuel not getting to the cylinders. You said you cracked a line and can see the fuel pulsing. Was that right at an injector? Does the...
  51. thclimer

    Tym vs Massey Ferguson

    Very true, all manufactures can have issues and so can dealers. The tread that I referenced is a pretty long thread over a significant timeframe. However, if I have the details correct and followed the sequence, it is my understanding in this case it seems like they have found a different...
  52. thclimer

    Tym vs Massey Ferguson

    You might want to refer to this thread: CLANGING in the front diff of brand new T494....what the heck
  53. thclimer

    Floating ring for NH

    Welcome to TBN. Another solution to eliminating water from your diesel is to use a Mr Funnel that has a membrane filter that does not allow water through it: Home First however is to get all the water out of your system, then when you use the Mr Funnel the system should remain water free...
  54. thclimer

    2023 MF 1835M 3-point lifting of implement jerky

    With it being this new it seems like a question for your dealers service group. Maybe you could even make short video of it raising to show them how its not smooth. Just another thought,,,is your snow blower too heavy for the tractor, did the dealer sell you the tractor and blower as a package?
  55. thclimer

    Playing bill collector

    I wonder what the percentage of a medical bill is associated with bureaucracy of billing...maybe 20%? Just think of all the people who are employed by insurance companies, by hospitals, by doctors offices..........by companies who write the software to manage the billing system. We go to a...
  56. thclimer

    Winter Maintenance on Slippery Private Roads

    That is pretty neat as I had no idea that a 3-point hitch or front mount self loader for sand/salt spreader was made.
  57. thclimer

    sources for quality front chains?

    Those look like they fit nice and you should have awesome traction on any slippery surface!
  58. thclimer

    Intermittent blue/whiteish exhaust from MF1754

    Yes, However I think your dealer may be able to drill down further on their system and find that part. I changed my filters one time and I had put everything back together and purged the air from the system only to find the red ring when I was picking up my tools so I got to practice putting...
  59. thclimer

    Intermittent blue/whiteish exhaust from MF1754

    Interesting, searching online for my 1736 and your 1754 I find the following page which shows a picture of the assembly with the red ring, the picture is upside down for how the part is mounted on the tractor:
  60. thclimer

    Intermittent blue/whiteish exhaust from MF1754

    On my 1736 there is a separator with a red ring that will float on top of the water then the fuel filter, both have filters in them and drain valves in the bottom of their housings. There is a metal shroud around them that is not shown in these pictures.
  61. thclimer

    NEED help !!!! Snow Thrower / Blower

    If the snow is light and fluffy it should not be a problem at all. When its heavy and wetter you'll just have to slow your speed down. Go for it.
  62. thclimer

    Winter starting problems tx1500/tx1300

    Purchase a battery with the most CCA that will fit in the space you have, the more CCA the better. My two 30 Hp tractors have batteries with 580 and 680 CCA. You will never be disappointed that you bought the largest battery you could fit in your space.
  63. thclimer

    NEED help !!!! Snow Thrower / Blower

    How log is your driveway, what distance will you be blowing? Is the surface gravel or paved, flat or hilly? Do you get a lot of ice, if so you might want to consider a set of chains. Ice covered with a dusting or so of snow is incredibly slippery add in hills and on our property you are...
  64. thclimer

    Tc33d will not start

    Welcome to Tractor By Net. There are lots of people here to help you, but we need a little more information to help. Here are a few questions for Idbrand: How long have you had the tractor and when was the last time you started it? What happens when you turn the key: Any clicking...
  65. thclimer

    My dog's not doing well

    Sad to hear he is gone, that's never an easy thing to do. They certainly are great companions.
  66. thclimer

    TIRE CHAINS

    Forgot to say welcome to TBN!
  67. thclimer

    TIRE CHAINS

    What style of chains are you looking for? I bought a set of Trygg chains, specifically their SMT Flexi 8mm which are easily adjustable by adding and removing links without tools. These chains are aggressive: I am very happy with their fit.
  68. thclimer

    Case DX55 won't crank, glow plugs dash indicator not lighting.

    Thanks for posting your solution. Its amassing how something that seems so simple can cause a headache, glad you found the issue.
  69. thclimer

    TC33D wont start

    The following attachments should help with the high-low switch circuit:
  70. thclimer

    JD 5055e died while cranking

    All good advise so far and I'd also check all your fuses since its very easy and quick to do.
  71. thclimer

    TC33D wont start

    Attached is the starting circuit schematic, which may help. He may have been referring to the Neutral Start Relay #10. Are all your fuses good? Is your ignition switch functioning correctly? Mine pretty much melted before I did the starting circuit modification. I replaced mine with one...
  72. thclimer

    E4 U12 code on dash won’t start

    On older New Hollands it was located with all the other relays, its strange that the service manual you have dose not show its location:
  73. thclimer

    A timber frame cabin memoir

    That is an interesting designed anchor. The cup at the bottom and its length being split into two sections indicates to me it was designed for flexing side to side (left to right in your picture) but to limit uplift.
  74. thclimer

    CS2410 replaced fuel filter, now it won't run

    Thanks for letting us know.
  75. thclimer

    Fuel Solenoid

    I think we need a little more detail on the no start condition. Does your engine turn over as fast as it always has? How did you test the battery to confirm it is good? Are you sure all your safety conditions are being met? I don't know the specifics for your model but they can be: seat...
  76. thclimer

    Removable Snow Cab

    The wood frame will allow you to make easier modifications than steel that's for sure. I was surprised how sturdy the PVC pipe frame that I made was. I used it for a few years and then got my cabbed Massey 1736 with a front blower, what a luxury.
  77. thclimer

    A timber frame cabin memoir

    Nice to see that you are making progress. Hoping you can get it weather tight before winter is in full force.
  78. thclimer

    My dog's not doing well

    Sorry to hear that, it sure can be challenging with him not being able to communicate what is wrong to you. I hope your vet can figure out what is going on.
  79. thclimer

    New Holland 37 Air Pump for DPF?

    Wow! $2K, what is the purpose of the pump, to inject air into the filter to enhance the burn off?
  80. thclimer

    CS2410 replaced fuel filter, now it won't run

    If all else fails, crack open each injector line right before it's injector one at a time. Turn the engine over until fuel flows out to insure all the air is purged from that line, then tighten the nut an proceed to the next injector line. If she doesn't start then you have another problem...
  81. thclimer

    TC33D REAR REMOTE PORTS

    Oh my, I guess another way to look at your scissor lift is.....at least you have one to fix.
  82. thclimer

    TC33D REAR REMOTE PORTS

    Great info, thanks for posting your result.
  83. thclimer

    Roosevelt Elk

    I have heard in the north east white-tailed deer should be considered an invasive species with no hunting license requirements due to the destruction of the local natural flora. Some biologists even say in the north east they have had a larger negative impact on the environment that any other...
  84. thclimer

    Roosevelt Elk

    High velocity lead is very effective..................however I'm sure there might be just a few regulations pertaining to it in your area. Sounds like your area is pretty large to try and control, which makes any means like a fence, motion activated sprinklers, alarms, lights....pretty...
  85. thclimer

    TC29 won't start

    Schematics, location of 30amp fuse:
  86. thclimer

    TC29 won't start

    Sure sounds like a blown fuse. You can try to replace the fuse to see if it will start so that you can get it in the barn or somewhere to work on. Fuses just don't blow because they are old and worn out, there was something drawing more current than that circuit was designed for so the fuse...
  87. thclimer

    TC33D wont start

    The fuel solenoid is #20 in the diagram, I don't have specific manual for the TC30 but the one I attached I would hope is close, its for the TC29, TC29D, TC33 and TC33D. Before I did the starter relay mod I had the relay clicking with out turning over the engine but once the tractor started it...
  88. thclimer

    TC33D wont start

    Post #127 of this tread gives a number of links for reference. From an electrical perspective there are only 2 things that I can think of that will shut your tractor off. 1) The seat safety switch. You said yours is bypassed. 2) Power to the fuel solenoid is removed. Which I guess could be a...
  89. thclimer

    New Holland rear Hydraulics setup

    I don't have rear remotes on my NH, so for me its just like LS Tractor Owner described: "If the plumbing hooks directly to the tractor, there should be a hose that gets disconnected from the tractor, then hooked to the BH, then hoses from the BH get connected to the tractor."
  90. thclimer

    Tractor died, slow blow fuse blown... what to look for?

    Correct you have to go to the link in that post to see the left side of the diagram: https://www.tractorbynet.com/forums/data/attachments/185/185570-7c78afe809bbde38e01a67cdeb66d8c8.jpg
  91. thclimer

    Tractor died, slow blow fuse blown... what to look for?

    This post has a wiring diagram: https://www.tractorbynet.com/forums/threads/gc2310-wiring-diagram.369721/
  92. thclimer

    No idea how, but a fuel line fell off my 1735M

    Thanks for the video link, that connection is pretty low underneath. Is it the main fuel supply line to the separator or is it a return line? Did you notice a puddle of fuel under your tractor at all?
  93. thclimer

    Lift too fast not smooth

    Yes there is indeed a flow control knob just below your seat:
  94. thclimer

    Tree cutting accident

    Very sad to hear.
  95. thclimer

    4110: How to get out of 4X4 drive

    Try going back wards and turning left to right while applying pressure to the 4-wheel drive lever to make it go back to 2-wheel drive. I think you said you had lifted the front wheels with the loader and that did not help. This has always worked for me, actually as soon as I lift the front...
  96. thclimer

    Tree cutting accident

    I had one about 12 years ago and had been cutting for about 25 years before that. It was a very informative class and made me approach cutting a tree down much differently.
  97. thclimer

    Tree cutting accident

    I never would have guess so many people are injured with a saw each year. I wonder how many are "first time" users or never had any training/experience?
  98. thclimer

    skidding logs

    or on the cable there are slides that a chain can be attached to:
  99. thclimer

    Petcock of fuel line

    Some filter housings have the shut-off built in as part of the housing like this one from Messick's for the New Holland TC tractors:
  100. thclimer

    NewHolland 21D

    Operator Manual: https://www.manualslib.com/manual/1827394/New-Holland-Tc21d.html Service Manual: https://servicemanualdownload.com/wp-content/uploads/2020/08/New-Holland-TC21DA-TC24DA-Tractor.pdf Messick's normally has a good selection of parts and diagrams online...
  101. thclimer

    Kubota B2910 Not Starting with Ignition Key

    From this site you can download a Work Shop manual that covers the B2410, B2710 and your B2910. https://www.manualslib.com/download/1407550/Kubota-B2410.html There are other electrical schematics but this attached one on the starting circuit might help you:
  102. thclimer

    Issue With ABI Land Plane ... I Think.

    Are your skid shoes ware plates that can be replaced? If so you could place wooden shims between them to essentially raise the cutting edge of the blades.
  103. thclimer

    Are backhoe subframes specific to the tractor or to the backhoe

    You can possibly start selecting a few different models to see if they are compatible: The B75 is not according to this link, look in the table for Tractor Compatibility, the BH75 is for a TC33, TC 35 & TC40 : https://woodsequipment.com/products/backhoes/bh75/
  104. thclimer

    Are backhoe subframes specific to the tractor or to the backhoe

    Hopefully others will replay also, but I have to believe its a combination of both the backhoe and the tractor. I have a TC33D with a backhoe and would not doubt that its subframe might fit a TC35 as well but I would highly doubt it would fit your TC45 as I think your 45 is a frame size...
  105. thclimer

    MF 1759 Hydraulic Level

    Glad to hear it worked out for you!
  106. thclimer

    Is anyone else missing the magic of a land plane over a box blade?

    Piston, it looks like your tractor has a number of rear remotes to hydraulicly adjust your tilt and angle. With these I’d say you are at a huge advantage to the average smaller tractor owner that does not have these when trying to use a box blade. As others have said with a land plane there is...
  107. thclimer

    DPF problems..

    Yikes, a know defect. I am clearly not a fan of regulation, but if the EPA is going to mandate this crap then they also need to require manufactures to honor a warranty of the emission control system/components for a significant number of hours, 5,000+??? Isn’t this they way it is for cars?
  108. thclimer

    DPF problems..

    Oh my that is disappointing.
  109. thclimer

    MF 1840M Thoughts

    She is too clean, you need to get some dirt/mud on those tires! I'm sure you will enjoy the cab and you will find so many uses for the forks.
  110. thclimer

    MF 1759 Hydraulic Level

    If you drive your tactor onto a slope you might be able to tell. It looks full to me but pictures can be tricky. If you don't have any sloped ground maybe drive the front or rear tires up onto something.
  111. thclimer

    MY 2014 Massey 1736 just quit won’t restart. What’s Code 002011 And below it 03???

    Nice find! was that on the underside of your 1736? So I guess the code 002011 03 high voltage can indicate no wires attached then.
  112. thclimer

    MY 2014 Massey 1736 just quit won’t restart. What’s Code 002011 And below it 03???

    Maybe this: As you though I'd be checking all the wiring and looking for the obvious of a branch or something poking where it should not have. Then I guess I would call my dealer's service department to get their assessment if this to determine if its something that you can fix. I'd ask...
  113. thclimer

    Hello from Arizona

    Welcome to TBN, Yes there are some very knowledgeable folks here!
  114. thclimer

    2005 NH TC29 DA TACHOMETER & HOUR METER STOPPED WORKING

    OEM is usually good stuff however in this case the OEM key switches for the TC series are a very poor design, see the following thread: TC33D Glow Plug Problem Fixed Like Harry mentioned I doubt the key switch has anything to do with your intermittent tach problem. I'd perform the test as...
  115. thclimer

    2005 NH TC29 DA TACHOMETER & HOUR METER STOPPED WORKING

    The following attachments might be helpful:
  116. thclimer

    2005 NH TC29 DA TACHOMETER & HOUR METER STOPPED WORKING

    As you have also suspected, my first thought is a poor/intermittent electrical connection somewhere. What type of load test did you do to the battery? Are you indicating that now with a fully charged battery you can easily start your tractor, but now with the tractor running you still have the...
  117. thclimer

    Whats wrong with my Land plane build?

    If your not satisfied with the smoothness that you are getting and without seeing your land plane actually working the ground I can only guess that the material you are trying to smooth just doesn't roll evenly over the land plane's bars. A land plane will excel at smoothing material that can...
  118. thclimer

    Whats wrong with my Land plane build?

    The picture where you are using it looks to be more like dirt with possibly clumps of grass/roots rather than stone/gravel. Stone/gravel will roll or flow over the bars easier than something that clumps like grass or dirt with clay. However, the dirt which you are dragging in your picture...
  119. thclimer

    Need help with wiring diagram for New Holland TC33D 2 style of harnesses.

    It's difficult for me to tell from the pictures of the fuses, but my guess is the 3rd fuse from the top in both pictures is a 20 amp which would lend me to believe they are both deluxe version. The schematic which you posted is labeled as a deluxe. Attached is a PDF of both the deluxe and...
  120. thclimer

    Need help with wiring diagram for New Holland TC33D 2 style of harnesses.

    From Messick's https://www.messicks.com/nh/151910
  121. thclimer

    Need help with wiring diagram for New Holland TC33D 2 style of harnesses.

    What does your fuse panel look like, is the fuse in the 3rd slot from the top a 20 amp or 7.5 amp?
  122. thclimer

    Need help with wiring diagram for New Holland TC33D 2 style of harnesses.

    I'm wondering if you have harness for a non-deluxe model, or if there is a difference between the harness for a TC33 and a TC33D. Refer to the attached PDF, the deluxe has a 20 amp fuse solely for the front lights, on the non-deluxe the front lights and rear flashers use the same 20 amp fuse?
  123. thclimer

    BX22 immediately turns off after start

    Thanks for letting us know what solved your problem as others may learn from it in the future.
  124. thclimer

    94 B3300 won’t start

    Here is a copy of the Operation Manual, it may show you the locations of the safety interlocks, for sure a Service Manual would but I'd guess you would have to pay for that: KUBOTA B3300SU OPERATOR'S MANUAL Pdf Download Messicks.com has some pretty good parts diagrams if your wanting to...
  125. thclimer

    TC-18 PARTS

    Lots of engine parts available through Messicks.com This is just the first listing for a TC18, you would definitely want to confirm your serial number: New Holland TC18 - 3 CYL COMPACT TRACTOR ON & ASN UD33666(06/02 - 12/03) Parts Diagrams
  126. thclimer

    ZD326 blade stops turning when in high grass

    Just for reference here is a picture of the setup tallyho8 is describing: Is your lock washer #4 in good shape?
  127. thclimer

    DK40 SE no start, no display, no lights, etc

    Thanks for letting us know how you fixed it.
  128. thclimer

    TC33D No Indication of Power Will NOT Start

    Glad to hear you are up and running again and thanks for letting us know the outcome so that others can also learn what to look for.
  129. thclimer

    TC33D No Indication of Power Will NOT Start

    Have you had a chance to to look at my first attachment in post #7, its a pretty good wiring schematic? All on one page unlike the operation manual where it is spread out over several pages.
  130. thclimer

    TC33D No Indication of Power Will NOT Start

    Do you have a wiring schematic? If I'm not mistaken looking at the attached schematic, it would appear the flashers should work without turning the key. Almost sounds like a mouse has chewed some of your wires.
  131. thclimer

    TC33D No Indication of Power Will NOT Start

    I would have to say with absolutely no power to the dash when turning your key to the on position that I'd be looking at your ignition switch. Do your headlights work? A normal 12 Volt battery would read 12.8 volts at best. Is the 15.7 volts you are reading with a charger connected?
  132. thclimer

    42" or 48" forks

    You will also have a better chance of seeing the ends/tips of the 48" ones if something like your hood or fork back rest is blocking your view. It is more difficult to see the tips of shorter forks.
  133. thclimer

    Comparison 6500 caught on fire... looking at used 5570 or new 6065.

    Wow, that's terrible. Thankfully you were able to get off without any injuries.
  134. thclimer

    New Holland Boomer 37 in DPF Shutdown Mode

    Yes, I would assume also that the wires you are removing from the solenoid are the ones sending the signal to shutoff your tractor.
  135. thclimer

    New Holland Boomer 37 in DPF Shutdown Mode

    Post number 10 seems to indicate you need to remove the wires going to the fuel solenoid. I would perform this this modification next:
  136. thclimer

    2014 Boomer 33 Starter makes noise but won't turn over engine

    Can you tap the starter while it is spinning, maybe it just needs some encouragement. In the end if that works you'll still want to have it looked at, maybe it can be rebuilt?
  137. thclimer

    Deck drive shaft

    Are you sure there are no burs or rust/gunk as the tolerances can sometimes be very small between the splines?
  138. thclimer

    New holland Tachometer issue

    If you don't find anything by checking the connections, these documents might give you further insight.
  139. thclimer

    Small but annoying problem..

    You glove solution may work, but anything that is durable is what you need to take up the gap, maybe some thick plastic. If the gloves don't last try something else and I'm sure you will eventually find something.
  140. thclimer

    1739e front wheel drive broke

    I'll admit that I have had issue with that site as well. If you get to the pages you need I'd take some screen shots or printout. I'd try a couple of internet searches for a service manual. If you are forced to buy one from AGCO its not going to be cheap, but then a front axel repair is...
  141. thclimer

    1739e front wheel drive broke

    I'd start with the AGCO Parts book online like which will look something like this: https://parts.agcocorp.com/en_US/apbsearch?q=masseyferguson/79036261/l&name=MF+1734E+%2F+1739E+COMPACT+TRACTOR# Next would be to get a shop manual if the online Parts Book breakout doesn't have enough details.
  142. thclimer

    Stihl MS 311

    Which other saws would you recommend?
  143. thclimer

    Workmaster 33 in "Safe Mode"

    I hope you or your dealer can figure it out. All this emission stuff can sure reek havoc when it doesn't function properly, such a shame.
  144. thclimer

    RK24H Dead?

    I'd be scratching head too going this just doesn't make sense. Was the tractor parked outside or inside? Even if it was outside I can't see how 2-gallongs of water could have gotten through the cap even if it was parked under Niagara Falls!
  145. thclimer

    RK24H Dead?

    2 Gallons of water from your fuel tank? That seems like a lot. How much fuel does the tank even hold? What were you refueling it from, 5-gallon containers, bulk above ground tank, underground tank?
  146. thclimer

    Sealed or serviceable bearing: your choice?

    Now where's the fun in that. If tractor manufactures stopped putting zerks on all the movable surfaces they know for sure sales would drop by 50% cause they know that greasing a tractor is the most enjoyable attribute of owning one.:oops:
  147. thclimer

    At its limit

    I agree, looks like he has a backhoe on the back. That's an impressive load!
  148. thclimer

    17.5X24 R4 tire off rim

    Glad to hear you got it on. You should have made a video of you using the ether. Were you able to get most of the weight off of the tire?
  149. thclimer

    NH TC 25 Bucket Tilt Issue

    Maybe a quick disconnect on one of your hoses not seated fully. Did you have any disconnected recently?
  150. thclimer

    Mahindra 4010 starting problems

    Do you have an electrical schematic for your tractor, if you do and can post it I'm sure someone would be able to explain what you are experiencing. My best guess, which is all that it is..... it sounds like something is "latching" the fuel solenoid open when turn your key to the start...
  151. thclimer

    Mahindra 4010 starting problems

    While I'm not familiar with your tractor I'd say you are correct about a fuel solenoid as that is what is typically de-energized to stop a diesel engine. If you don't have a manual you might be able to follow the fuel lines to see if you find a "gizmo" with either one or two wirers that seems...
  152. thclimer

    LS XR4145HC starting problem....

    Making sure the PTO was not engaged or that someone was in the seat was the first thing you needed to confirm. But without using a meter to verify the switch is being made or bypassing these safety's you have not eliminated them as being the problem. In addition to the ones I circled I'd...
  153. thclimer

    LS XR4145HC starting problem....

    Have you verified these switches?:
  154. thclimer

    LS XR4145HC starting problem....

    I would have thought there would be some "safety switches" in the circuit for the starter relay to be energized like the tractor being in neutral, the PTO not engaged, parking brake on, seat switch being made like someone is sitting it......
  155. thclimer

    TC33D blows fuse at start

    I'd say then you would want to inspect any of the wiring from that fuse to the starter as something is allowing a 30amp draw to blow that fuse. If all the wiring checks out then I'd suspect something with the starter or its solenoid.
  156. thclimer

    TC33D blows fuse at start

    When you say "the starter fuse blows" are you referring to it's 30amp fuse, see attached? If not let us know which fuse it is along with it's amperage rating.
  157. thclimer

    Propane gas oven not working

    The Amazon listing even indicated the safety valve is manufactured by Frigidaire, the same as the oven manufacture.
  158. thclimer

    Propane gas oven not working

    Yes indeed!
  159. thclimer

    Propane gas oven not working

    Looks like it is an easy continuity test:
  160. thclimer

    Propane gas oven not working

    It looks like there is a safety valve which is electrically controlled that could stop the supply of gas to the oven, see item #17 if I searched correctly: Frigidaire Range FGF326ASD Parts List
  161. thclimer

    LS XR4145HC starting problem....

    Sorry I'm not that familiar with your tractor to direct you their specific locations. You may be able to trace the fuel system to find the solenoid, most likely its close to the injection pump or at least that's where it is located on tractors that I'm familiar with. Do you have a operators...
  162. thclimer

    Help - New Holland TC30 Injector Pump Replacement

    This one is a little different and does not mention your TC30 but does reference the TC29. As dlctcg has mentioned I'd be looking for a manual specific to your TC30 model.
  163. thclimer

    Help - New Holland TC30 Injector Pump Replacement

    I would hope whoever you purchased the re-manufactured pump from could send you a procedure specifically to your tractor for its calibration.
  164. thclimer

    Help - New Holland TC30 Injector Pump Replacement

    The TC29, 29D, 33, 33D manual I have also mentions the "Spill Timing" procedure under the Timing and Governor Adjustment section. It sure doesn't seem like its.....just bolt the new/remanufactured injection pump on and fire it up without a lot of checks/adjustments.
  165. thclimer

    L2501 forestry winch too small to be useful? Other options?

    I had forgotten all about winding the cable up, it sure is not fun. I have a smallish wooden box that I keep the cable in: So now you got me wondering if a shop air hose reel would work? I also use a skidding cone to help prevent the end of the log which is being pulled from catching on...
  166. thclimer

    LS XR4145HC starting problem....

    If it is cranking but not starting then your issue is that it is probably not getting any fuel. Is your fuel solenoid being energized? There are two way to shut a diesel engine off, stop the air from entering the engine or stop the fuel. I would guess you are not getting power to keep the...
  167. thclimer

    how to get old telephone poles

    That's a pretty big span. Is this just going to be a bridge for people to walk across, no equipment?
  168. thclimer

    how to get old telephone poles

    So you want to use them as beams for building a bridge? What length of the pole were you looking to use as I thought mainly just the bottoms (10' or so) of the poles were treated for rot, but I'm not totally sure??
  169. thclimer

    how to get old telephone poles

    Bridge4, just curious, what do you want to do with the poles?
  170. thclimer

    LS XR4145HC starting problem....

    Just another item to consider but the New Holland's at one time had very cheap key switches (lots of plastic with flimsy contacts), I replaced mine with a much more robust NAPA and many issues went away.
  171. thclimer

    L2501 forestry winch too small to be useful? Other options?

    I think they are a little more popular in the northeast. I was seriously considering the 35M myself a while ago. I currently just used a 120 foot long cable and a snatch block that I hang with a strap in a large tree maybe 6-8' high from the trunk) then use my tractor to pull the cable from...
  172. thclimer

    L2501 forestry winch too small to be useful? Other options?

    Wow, my bad. I didn't know they made a hydraulic style like that! Are they any quicker than the electric powered ones?
  173. thclimer

    L2501 forestry winch too small to be useful? Other options?

    The vehicle type winch you linked from Amazon would be painfuly slow and it draws a considerable amount of current. If you go that route I'd consider an alternative power source other than your tractor's battery, possibly another battery being charged by a small generator. Where are you located?
  174. thclimer

    Window mounting 'buttons'

    It sure does look like a cap that can be removed and will expose the fastener type.
  175. thclimer

    New Holland TC27D Wiring Diagrams

    interestingly the model TC27D doesn't show up on the Messick Website, wonder if it was sold outside of the US: I wonder how similar a diagram for a TC25D or TC33D would be?
  176. thclimer

    Can I get some thoughts and opinions regarding Echo chainsaw?

    I'd have to guess like others your FIL's "commercial Husqvarna chainsaw" did not have the improved antivibration design of today’s quality saws. Husqvarna, Stihl and Echo are all quality manufactures, your dealer is also a very improtant consideration. I have 3 Stihl and the Echo CS-2511P...
  177. thclimer

    Willy's wife passed

    So sorry to hear that, my condolences to you and your family, I'm sure you have some very fond memories from those 56 years.
  178. thclimer

    Sad and Tragic Recovery Accident in AZ.

    You use what is called a soft shackle: The soft shackle can be placed around many different frame shapes under the vehicle, its a pretty clever idea. This Youtube channel channel uses them almost all the time: https://www.youtube.com/@MattsOffRoadRecovery/featured
  179. thclimer

    Log Cabin Fireplace/chimney advice needed.

    Wow, this has sure dragged out, wish you the best. Did you ever get your fireplace?
  180. thclimer

    Identify tree via bark?

    Oh my yes, they certainly do dross bread (hyberdize). The following video is about an hour long but it will describe the number of vairiations of oaks just in New England and just how difficult they can be to identify:
  181. thclimer

    Attaching tarp after blown off shingles.

    Sounds like a good plan to wait if no rain is predicted in the next few days. Hope your roofer can get to you soon.
  182. thclimer

    Attaching tarp after blown off shingles.

    Oh most diffidently, I was only showing the picture on how to wrap the trap around the board to help minimize the wind damage from tearing the tarp.
  183. thclimer

    Attaching tarp after blown off shingles.

    In addition to using the wood either 1x4, 1x3 or 2x4's if you wrap the edges of the tarp around the wood then nail it down it will withstand the wind better.
  184. thclimer

    Keeping mice out of your tractors engine bay over the winter and summer too.

    Do you have a particular barnd that you find effective? I have tried them in the past without much sucess, but I'm alway willing to try again.
  185. thclimer

    Massey 1825e

    Glad to hear you are enjoying your new tractor. What other models did you consider when you were looking and what made you choose the 1825e?
  186. thclimer

    Identify tree via bark?

    I'm certainly no tree expert, but the one closest in your first picture looks almost like a ash as the bark is woven like a hamock. the others sure do look like red oak. If you cut a 3-4" branch off I think you'll be able to tell for sure about if they are red oak. No matter if its oak...
  187. thclimer

    Joined the red club!

    Wow, that's very unfortunate. Nice that you have the ability and knowledge to work on it. Thanks for the descriptive write up and pictures! How many hours were on your 1740?
  188. thclimer

    Snowblower chute slow in one direction

    Thanks for letting us know!
  189. thclimer

    New Holland Boomer 37 in DPF Shutdown Mode

    Something sure seems a little concerning here. You mention the first time (July 2021) you had issues and the dealer serviced your Boomer that the DPF filter "did not have a heavy soot load" but the tractor acted like it was putting you into limited operation because of a unsuccessful...
  190. thclimer

    New Holland Boomer 37 in DPF Shutdown Mode

    I would definetly think that is high enough too! I just wanted to make sure you were not running something like 1,100 - 1,200rpm's
  191. thclimer

    New Holland Boomer 37 in DPF Shutdown Mode

    I can certainly understand that when they asking that much. I wonder how closely you have to mimic the resistance of the filter and if there is differential pressure sensor across it, is there a range where it needs to be happy?
  192. thclimer

    New Holland Boomer 37 in DPF Shutdown Mode

    Sorry to hear your filter is plugged again! When you say "I try to keep my tractor revving all the time to avoid soot buildup" what rpm do you try to keep it at when your using it?
  193. thclimer

    Need advice New Holland TC55da

    Thanks for the update, that helps to better understand the situation. Its nice that you are there to help your dad.
  194. thclimer

    B2650 stopped and won’t start

    Glad to hear you got it running and thanks for letting us know.
  195. thclimer

    Propane installation - Above or Under Ground?

    In our area if you have one in the ground you most likely purchased it and can have anyone fill it. If its above ground usually they are supplied by the company who only has the right to fill, thus limiting your ability to shop for the best price. In addition to what has already been...
  196. thclimer

    Need advice New Holland TC55da

    I have no idea, but in the hopes of getting others to see this and possibly reply, maybe the key turns counterclockwise for glow plugs, then clockwise to start??? Are you sure a safety like your seat switch are not allowing power to the fuel shutoff solenoid? An option would be to supply...
  197. thclimer

    B2650 stopped and won’t start

    I guess if it were me I'd put all the hoses back on, remove the fuel shut off solenoid, loosen (maybe 1/2 a turn) one at a time the nut on the fuel line as it connects to each injector and turn the engine over until there was a good squirt/flow of fuel, then tighten that nut down and proceed to...
  198. thclimer

    B2650 stopped and won’t start

    I would beleive so but to be sure as was suggested just remove the fuel shut off solenoid, it is only 2 bolts. However, if your tractor starts with it removed you'll either have to reinstall the shut off or block off the air to the engine as your tractor will not shut off.
Top