Search results

Results 1 to 18 of 18
  1. S

    MF 150 slow hydraulics

    Hi I have a 1963 MF 150 and over the past couple years the hydraulics have really seemed to slow down. It's much worse in the winter (to be expected). I have a loader on the tractor which runs off the internal hydraulic pump. The hydraulics also have a "shutter" to them when using them. I've...
  2. S

    Lets see your best tractor pictures

    Here is a few pictures of my old Massey Ferguson 150. Not pretty but she has yet to let me down!
  3. S

    LED Tractor Lighting

    Speaking from experience, there is a huge difference in light output depending on the quality/price of the LEDs your buying. That being said, you don't need the expensive LEDs for every application. On my truck I have quality name brand LED fog lights, as I need the LED to project a long ways...
  4. S

    Tractors and wood! Show your pics

    I spent a few hours yesterday working on clearing bush for my future driveway
  5. S

    Your towing rigs and trailers

    It's a tight fit with the mower. Have to detach the 3 point and back right up against it.
  6. S

    TODAYS SEAT TIME

    This weekend we started clearing out bush for the driveway on my property. Didn't snap any pictures of my backhoe working, next time.
  7. S

    Skidsteer pallet forks

    Thanks for the feedback. Yes it was a fun project. I'll see how they work and maybe add a bottom track to hold them in the future. This skidsteer has an unusual quick attach which was part of the reason I couldn't find any used ones. On a side note, I started this project with a 110v flux cored...
  8. S

    Skidsteer pallet forks

    I'd been looking for a set of used pallet forks for a while with no luck. So I decided to build my own. Most of the material was either 2 x 4 x 3/16 tubing or 3/16 plate. I'm happy with how they turned out. I've overloaded them on purpose and the machine will lift the back tires off the ground...
  9. S

    3 point stabilizer

    Ever since I bought my tractor I have been meaning to build something to keep the 3ph attachment from swaying so much. I also wanted to be able to set my blade off to one side at times. Finally got around to it. Couple turn-buckles, some chain, and a couple bolts is all it took. Works great so far.
  10. S

    Your towing rigs and trailers

    My 2011 F250 with the 6.2L towing my 18' car hauler with 5200 lbs axles.
  11. S

    Bucket grapple with actuator

    I built this bucket grapple a while back and have been meaning to share it with you guys. Originally I wanted to use a hydraulic cylinder but couldn't justify the cost for the amount I use it. Found this electric actuator on sale for $160. I believe it has 2000 pounds of pushing force, but the...
  12. S

    Tractors and wood! Show your pics

    Here's a couple pictures of my old Massey Ferguson. Haven't taken too many pictures moving wood. However I just purchased a 70 acre woodlot, so should be lots of photo opportunities this summer. I'd really like to get a pto winch setup like some of you guys for skidding.
  13. S

    Snow Equipment Owning/Operating Pictures of your snow weapons

    My primary is the quad. 1996 sportsman with 60" plow. Handles 90 percent of the snowfalls. If it gets too deep or if banks need to be pushed I use my 1964 Massey Ferguson 150 with snow bucket and 6 ft rear blade.
  14. S

    Made some bucket forks

    I decided to build a set of clamp on bucket forks for my tractor, mostly for loading and unloading my sled deck in my truck. Although I've already found many other uses for them. I made them 6 feet long plus 18" extending under the bucket. I used 4" C-channel for the fork and 2x4 tubing for the...
  15. S

    Very weak bucket curl

    I have a 1964 MF 150 with aftermarket Allied loader. Loader is run off the tractors internal hydraulic pump. I bought the tractor last year and it's always had a very weak bucket curl. The loader arms have plenty of lifting power and will lift the tractor no problem. The odd thing is the bucket...
  16. S

    3-Point Hitch Massey 150 strange hydraulic issues

    There are no other control valves on the other side. Forgive me if I'm misunderstanding I do not have very much experience working on hydraulic systems but I would like to learn. Here is a picture from the other side
  17. S

    3-Point Hitch Massey 150 strange hydraulic issues

    Thank you for your reply. I'm not exactly sure where you are saying to install a selector valve. Here is a picture if the current setup. Also the previous owner claimed that he did not have this problem before it went in for service, and it did not have any additional valves then either.
  18. S

    3-Point Hitch  Massey 150 strange hydraulic issues

    I just purchased a 1963 massey ferguson 150 with allied loader. The guy I bought it from just had the hydraulic pump rebuilt last year. The problem is that apparently the guy who rebuilt it didn't know what he was doing.. Somehow the 3ph does not work properly. It is linked to the bucket...
Top