Search results

Some guys stick a few 2" PVC pipes in before they do the concrete. Makes a nice place to stick a shovel or rake handle. wish I knew that before I poured mine

I purchased half shaft for I believe a Honda SUV and had a machinist cut the outer joint off and weld in place of the U joint on the PTO shaft. I made the support bracket and mounted the 2" pillow block bearing. That setup worked for about 10 years until last winter the splines in the quick...

My father-in-law has an X700 with a 47" snowblower with the plastic impeller. last night I stopped by his place and while he was blowing snow I could hear the impeller rattling whenever there was no load on it. I checked it out and found the impeller will chuck back and forth about 1/4". The...

My neighbor took this when I was clearing him a path to his wood pile on Sunday.

I would like to try one of these on my cab when i get tired of swapping it every spring and fall. It runs on 12v DC including the compressor, only thing is the alternator would need 50+ amps just for the A/C but it beats running any hoses and finding a way to mount an open drive compressor...

I have 2 heaters fed off a circulating pump from a Dodge Durango. I also put shut off valves in series so i don't need to drain the cab in the summer. when the wind was blowing in sub zero temps the windows would ice up before I added the second heater and pump.

I installed a digital gauge on mine the year after I bought the tractor. I drilled and tapped the plug in the thermostat housing above the alternator for the sensor. If I'm working it hard and the coolant temp is 180° or higher I let it cool back down to 160° before I shut it off. Only takes a...

Don't know if this is posted here yet but it's a great find. Plowing Tug Hill - YouTube

Just curious to know if any dealers are getting pricing info on the 2013 tractors that are above 25hp that will fall under the new tier 4 regulations? I'm wondering how they will meet the new regulation, what pricing info is out there and do they plan on de-rating some engines to fly in under...

Finally had a chance to deal with the vibration from the mid pto shaft. This is what I came up with. The vibration is totally gone. Still have some chain noise so I plan on trying a motorcycle type O ring chain as they seem to run a little quieter.