Search results

Anyone know of an online source for Bush Hog parts? I had pin rust and refuse to take grease. The zerk is fine and I have hammered the pin back and forth with WD40 and broke it loose, but it still won't take grease. It the pivot pin that connects the arm to the frame arm just in front of the...

I have been preparing the food plots with a 6.5' disc harrow that weighs about 900# for many years now. We do about 20 acres or so a year. Ground is in South Mississippi. The tractor is 2WD and the fields are flat. What width lift disc could I get away with? I don't need anything offset...

Found these for sale in my area. What make are they? Worth a buy? They are CHEAP.

We contracted someome to do some dozer work on our land a while back. Two relatives and myself walked the property with the guy and showed him what we wanted done. We asked for an estimate of time as we had a budget. I got a bill for 2.5X the verbal estimate. I was never made aware it was taking...

I have a 2 row planter and will be panting 5 acres of corn shortly. The bags say the corn seed size is F17 and was wondering what plates matched up to that. I can't seem to figure it out. Thanks.

I plant about 18-20 acres of food plots every fall and I want to do about 10-12 acres in the spring. My property is located in southwest Mississippi in the delta area. No rocks. Near the the river. Very fertile. We have a Kubota M4900 with a six foot Tufline disk and a 6 foot cutter and...

It's time for the 50 hour service in my M4900 2WD gear drive. I went to NAPA today and bought 2 gallons of Shell Rotella 10W-30. Hopefully no problems there. NAPA had one tranny/hydro fluid that was Kubota UDT rated BUT only in $10/gallon containers. They did have another one which was rated...

It's time for the 50 hour service in my M4900 2WD gear drive. I went to NAPA today and bought 2 gallons of Shell Rotella 10W-30. Hopefully no problems there. NAPA had one tranny/hydro fluid that was Kubota UDT rated BUT only in $10/gallon containers. They did have another one which was rated...

I am heading up to the deer camp this weekend to do some tractor maintenace. My manual is up there and I need to know what the capacities and specs for the hydraulics/transmission and engine oil are. I already have the the hydraulic and oil filters and will be stopping by NAPA on the way out to...

I am probably going to pull the trigger on a new Chevy 2500 this week. I only pull 10K (tractor and trailer) 600-700 miles a year so the cost of the Duramax/Allison really isn't justified nor affordable for me. I don't need 4WD. My question is which axle ratio should I go with and what type of...

which one and why? I like the Yetter #71 the best, but it isn't available in my area. Covington is.

I am thinking pipe and concrete as the main guts of it. I thought about getting some 2" pipe and welding some rebar around it to it to make a internal frame. I would then insert that into a much larger pipe. Fill with concrete. Then take some heavy rod and insert it into each 2" pipe end. Then...

And didn't even know! I am a bad bad man. So I was looking over the LA Dept. of Motor Vehichles website last night and it turns out I need a Class A CDL to pull my tractor and trailer. Whoops. Any trailer that is rated to carry over 10,001 pounds must be pulled with a driver with CDL. I can...

My Kubota M4900 spec sheet says it has a Cat I and II hitch. I have spacers that I put on my harrow pins so they fit the lift arms. On my Woods 720 medium duty cutter the lower pins fit without the spacers on the hitch, which makes me think it's a Cat II implement. Question: Does a Cat I and II...

Anyone know the engine foot pounds on the 54 HP version of the M4900?

I recently bought a 500# capacity seeder/spreader to fertilize and plant food plots. It didn't come with a manual. I was wondering about pto speed on it. It seems that 540 rpm would be awefully high for that little gear box. Am I right in thinking this?

I am looking for a plow for my 2WD Kubota M4900 which is rated at 54 HP (45 PTO.) The manual says a 2 bottom 16" moldboard plow is max for this tractor. I don't have the time to travel to an auction. I just want to make a call and have it ordered and delivered to a tractor dealership where I can...

Post deleted by LeadPoison

Here is what I want to do: I have about 7-8 acres of fields I want to spray to kill the grass and plant food plots for deer. Most are wide open areas, but a couple of plots are accesible by crossing a creek and through the woods. These fields are small and a large 20 foot wide boom would not...

I was told on my M4900 by a family member that ideally you should decrease RPMs when going from forward to reverse or vice versa because it was hard on the clutch and it would wear it out. This is mainly with PTO speeds above 2000 rpms. Any truth to this? I can't imagine resetting the hand...

Was curious if anyone here is from the New Orleans area? I have a little project at a relative's home that requires a small tractor with a loader and backhoe. My new Kubota M4900 is just too big. I need to remove some garden beds with small trees in the backyard. Anyone interested?

First of let me say I know WHAT draft control does. Question is how do I set it for the M4900 for a 6 foot medium duty shredder and a 6.5 foot disc harrow? Draft control has a "sensitive," "insensitive" and "float position." Position control has "up," "down," and "float." So... what do I do...

It\'s official... new M4900. Stopped by the Seal Tractor in Woodville, MS on Friday morning. An hour later we agreed to the folllowing: M4900 Bush Hog M346 loader Tufline 6.5' Disc Harrow 500# Seeder Woods BB720 Cutter Insulated aluminum diamond plate canopy All for $25,000 out the door and...

After debating to go with a JD 5105 or the M4900, the Kubota won. I was quoted $25,000 for all the following: M4900 2WD Front end loader Canopy 6.5' Tuffline Disk 6' Woods BB72 500# Spreader I thought it was a fair price based on what others were quoting. I also placed the two tractors side...

Is there a website that shows all different types of 3PH implements and what they do?

Well I went to Evergreen Tractor in Covington today. I got some quotes on several different models and on some implements. 5103 with FEL - 18,500 5105 with FEL - 20,930 5105 DT with FEL quick detach - 25,550 Deere Broadcast Spreader - 690 Deere 6' Disc - 1449 Bushhog 286 - 2330 Woods BB720 -...

I am located in south eastern Louisiana/southern Mississippi. I got the following quotes from one local dealer which seemed high. M4800 2WD - 14,400 M4800 DT - 18,400 M4900 2WD - 17,200 M4900 DT - 21,000 M5700 2WD 18,400 M5700 DT 22,400 Loader - $5000 for all models of tractor Howse 6 foot...

When do they come out? I got my eye on one.

A while back I started the post below: Deer Camp Tractor Money was an issue back then, but now there isn't due to a little cash cow. So here is what I want to do: Bushhog and disc 30+- acres (lots of ground engaged work) Plant deer crops Clear some Katrina debris FEL work - 4WD a must Fill...

On the JD website it says this model is built in India. Does anyone know who makes them?

I have been looking hard at this model and have come across only one possible issue. I will be performing my own basic maintenance like fluids, oil, filters etc... One review I read stated that it was a real pain to replace the filter due to hydraulic and fuel lines in the way. He said you even...

I am located in Southern MS and need a price check on the following: L3400 DT with/without FEL L4400 DT with/without FEL Thanks.

Do you need both? Do you always disk then till? or can I just till without bothering with disking? My guess is for hard ground disk first, otherwise just till? Am I correct?

Well, I have unsuspectingly found myself in the tractor market and am really looking forward to it! I do need a little guidance in a couple of areas. First off let me tell you what I got as far as the land. My family owns one tract of land that has approximately 30 acres of fields and trails...