Search results

xI have been a travel nurse since 2010 working primarily Alaska and the Western United States. Working Phoenix one year I had a AHA and OH moment. Much of western Canada goes to the Phoenix area for the winter. There is oil there, money and they do not see any reason to stay frozen for the long...

D Door is 12’ X 15’ I hate struggling to get in and out of a building.

Has anyone used the front end loader hydraulic connections to run the offset flail mower? I would need another 4 feet of line and a 180 degree redirect to do it. Support the lines in a way they do not get damaged is a concern too. I have 1 outlet on the rear of the tractor now. Offset flail...

I am finishing a SteelMaster Quonset. They said I was out of warrant so a missing piece was going to be another $126. I bent one myself to finish the job. The sent plenty of bolts. Seem knowledgeable, however the price they wanted for the baseplate was crazy high, like 6k. I designed and built...

I had some things go badly with less than 500 hours. The engine light comes on as the Emissions becomes loaded down with carbon on the EGR valve. I replaced the valve at a cost of $826.39, the starter went bad, another $700, the clutch went $3150. I would not say it is cheap to keep it up. The...

I have a 2” receiver on my quick release loader platform. The maneuverability is first rate for the very tight back in job.

The Xframe is stronger for snow weight. I would not recommend elderly persons do this. The height and weight is a component of concern. I built my own baseplate. I found it very helpful for assembly. I would have bought the baseplate if it were 3k or less. The X frame was more like 7k for 48’...

I had a gel mat battery go dead this summer for my RV. I hooked another 12 volt battery to the discharged one and it slow charged to life. The buffer action allowed it to accept the charging. I could not get the Gel Mat to accept power directly from a battery charger.

I am in the process of setting panels now. This what I am using to lift the center section of 3 .

Mahindra Cab Hinge

I have been reading about the huge losses Ford is taking on the Lightening. I have not seen a coherent plan for battery recycling and where is the electricity going to be generated? Big problems that do not have a good solution. Fuel cell is interesting but the production of it needs...

The ride good, good pickup and nicely appointed. If charging would have not been such a problem we would call it a win. The additional charges incurred for fuel that were not delivered with horrible wait times made it a bitter experience.

We rented a Polestar 2 from MCO ( Orlando) and had qui a problem doing a charge. We drove to Lakeland, 60 miles and it took 22% of the battery. I then spent 12+ hours at a ChargePoint station in Lakeland to gain 52% battery capacity. The charge rate and availability of charge stations is not...

I am doing a Quonset and found the cost of cement staggering. I paid $225 / yard in MI. That was a Saturday delivery so it was more. Getting a cement company is a good move. It was 90 and we were unable to finish the cement quick enough. We kept adding water and had visqueen under it but it was...

I am having the clutch replaced on my Mahindra 2565 for 3K. I think my grandkids have been riding the clutch. I am gone from home a lot and they keep the place snowplowed and mowed. I hope to correct the clutch riding.

The ground force is extreme in MI clay. See the picture below.

I had a small Ford 4000 gas with yard tires. It was good for mowing but not much else. I had chains for snow plowing and got by. I now have a Mahindra 2565 , 65 HO with a utility tire. There are some big ruts so once again I have tilled the yard and scooped off the turf. I have a 8’ drag and...

I loaded beet juice and found it was thick but pumped well enough to get the job done. When using my loader the rear tires weighted is a real advantage. I am happy with the beet juice. As for smelly I did not notice.

I have had to clean the EGR valve many times to get the MIS light. I finally had to break down and buy a new EGR valve at the cost of $826. The light intermittently comes on with a fuel overload type condition. Does this sound like something you have an answer to? Additionally I have a...

I found that my 65 hp Mahindra was just enough to be of use for unloading Semi deliveries. Engage no 4 wheel drive is mandatory and f you want to handle the traction demands. Loaded rear tires are also a must.

The Mahindra handles emissions differently, the EGR valve has a big job. A new valve was $900. That stung but it fixed the engine fault message and made the tractor run great. I had cleaned the valve several times. That always made it better but it finally stopped working.

Loading tires with beet juice is the choice for climates that freeze. As for the box scraper I must agree, that unit does much more than a simple back blade. I bought a 7 foot for my 65 ho Mahindra, a nice fit and fabulous work tool.

I recently had a very slow roll-over condition. The battery is 6 months old and I was using a 200 amp starter boost without improving the speed of roll- over. I had the battery tested and it was bad. A new one was placed and no change. I then took the starter off and had it tested. Bench test...

Starter Problems