Search results

I have a 2012 John Deere X740 with 60" 7 iron deck and a 2017 x750 with 54" deck. Would like to swap them. Will they fit?????

Anyone use the quick hitch from Harbor Freight? What about quality? With coupon they are $69.95 at local store. 3-Point Quick Hitch - 27-1/2" Clearance

Lens12, Do you have any drawings on this cylinder. It is from one of your PS kits. Evidently has a valve problem, works good turning right, will not assist turning left. Hydraulic shop rebuilt it but still does the same thing.

Spread 108 tons of sand on football field. Moved all of it with YM2020. Thats a lot of work in about 6 hours!!!!

Looking for knowledge on the IH 3288. Weak points, good points, general working information that can be used in making a decision to buy one. Thanks in advance

The hydraulic pump on my 2020 has started to squeel at high RPMs. It's not starving because I heard that sound when I first bought it and the screen was stopped up. This is a different sound. It only does it when the pump is not loaded. When you load it by moving the loader or 3PH it is quiet...

I have a home made spray rig for my tractor but it was hard to get in close places and spent a lot of time turning around. Came up with the idea to put one on my Zero Turn. Should be much easier to get around with. I had a toggle switch on the dash of my tractor to turn the pump on and off but...

If you are going to buy the Yanmar aftermarket Power Steering unit, don't even bother to install the hoses. Just save your time and effort and have new strong hoses made before you install it. The ones that come with it are the cheapest, no good junk that they could find. The first one lasted...

Bought 2 new toys this spring from Leinbach. This 3PH plugger aerator and a 12" moldboard plow. Both do an exellent Job!!! This aerator really does pull the plugs about 2 1/2 inches deep. I have no trouble pulling the plow 8-9 inches in the garden and the corn patch. Really does a good job.

Looking for pictures of power steering on Yanmar 180, 180D, 187 or 187 D. Need picture of the bracket where cylinder bolts to clutch housing, and where the cylinder attaches to steering arm. You can either post pictures or email them to me. Thanks

The things some people will do to try to sell a tractor:mad: :mad: :mad: 2002 Yanmar Diesel Tractor - (eBay item 110182883812 end time Oct-29-07 22:09:13 PDT) And Another!!!!! 2002 yanmar 3000 tractor and 16ft big-tex trailer - (eBay item 280165242920 end time Oct-30-07 23:06:03 PDT)

My son has 16 acres that I started bush hogging today to get ready for winter. Did it in the spring, but even without much rain the brush grows again. Picture #1 is of the brush I was cutting. Picture #2 is some of it that has been cut Picture #3 is some Alabama Kudzoo, cleaned a lot of...

Is it possible to replace the PTO shaft seal on a YM2020 without pulling the entire cluster out of the tractor? If so, How? Kicking myself for not replacing it when I replaced the rear axle seals last winter:mad: :mad: :mad: :mad:

Been looking at adding an aftermarket power steering unit to my YM2020. Have been communicating with Len Sheaffer about a unit he has which would require some modification in order to work on my tractor. Has anyone installed an aftermarket unit? If so, could you post some pictures of what has...

How about this "3 cylinder Yanmar" that has only 2 injectors:confused: :confused: :confused: eBay: Yanmar Tractor/Loader/Scraper, New Cond, 0 hours (item 300101540050 end time Apr-23-07 15:49:39 PDT)

I find this very hard to believe. Looks a lot like a Kubota tractor to me. eBay Motors: YANMAR TRACTOR ONLY 58 HRS LIKE NEW RUNS GREAT NO/RESV (item 200053403096 end time Dec-09-06 12:17:44 PST)

This is very interesting reading. Engine Oil Filter Study

Winter is a good time to do little repair jobs on the tractor. Like replacing a bad rear axle seal. Might as well do both while I got it tore down.

Finally got the FEL moved from the 1700 to the 2020. Had to modify some of the brackets and shorten the front bumper frame on the tractor. Now I have to touch up some green paint!!!

Looking for a supplier for double compression fittings for 11mm steel line. I think that's the size of the high pressure hydraulic line on YM1700, If that's not the size maybe someone will give me the right size. Maybe someone has the name of metric compression fitting supplier.

I need a couple of bars with springs that hold vertical tension on the drag part of a RS1400 tiller. I have chains now, so I can use the brackets on the drag. I can fabricate brackets for the top. Anyone have an extra set?

Don't know if this is the right place for this or not, if it's not someone will move it. I have a 5' Bush Hog Brand finish mower that I need to change the gear lube in the gear box. I was wondering what the thoughts were on using 140 synthetic.

What's the proceedure for changing a rear axle seal on a YM2020? I've got one leaking a little bit and thought I would change it. Do I have to go into the rearend to unlock the axle or do I just pull it it out?

Got the wheel adapters made and turf tires installed. Now all that's left if dress the wheels a little and paint them. Then I'll be done:D :D :D OOPS forgot about moving the FEL from the 1700 to the 2020. IT NEVER ENDS!!!!!!!

What's the small black knob beside the gear shift do on YM2020:confused: :confused: :confused: As you can see on the decal it shows it in and out but I can't read the explination:rolleyes: :rolleyes:

Can someone measure the height of the rear tires on a YM1300? Thanks

I didn't know they made the YM1700 in 1983. Or the YM2000 in 1994

Due to something being wrong with my last thread on this subject I'm reposting this. Len, Danny, Mark any others. Looking for new or used shift indicator panel for YM2020. Thanks Eddie

Looking for a shift indicator panel for YM2020. Either new or good used one. Thanks

These look pretty good, I believe they fit 15" wheels. Turf Tires

When I bought it the red paint was so faded from sitting outside all time I was expecting to have to paint it. One day I picked up some rubbing compound I had laying around and rubbed a little spot. I wound up rubbing and waxing all the red. I painted the green and the wheels and moved the top...

Yeah Right!!!!!!!

I have been watching this listing on Ebay. It started about the same time as one that has already been removed. It didn't stay long at all. I guess if you list hundreds of items, Ebay bends their rules for you

Ok experts, can you tell me which tractor has the same frame as a YM2020? I need to change my FEL from my YM1700 to the YM2020 and there is no bracket listed for it. I can do it by modifying the existing brackets but I'm lazy and would like to find a bracket kit that will fit. Is a YM2002 any...

The alternator is charging, at least has 14 volts on battery terminals at 2000 rpm, but the light stays on. Any Ideas? Is there any cross over for the screw on hydraulic filter? It has a CAPA 145VL-35. Would like to be able to get it local. Thanks Eddie

Anyone own a YM2020?

Any Yanmars have live PTO?

Got my ebay FEL installed and moving dirt. It works great

I didn\'t know This I didn't know this was a 1993 model

Anyone have a FEL on a YM1700 that could post a picture of how the hydraulics hook up. Like where they hook up, under the seat or down on the frame? I was thinking I would like to do the quick disconnects so it would be easy on and off. thanks Eddie

Anyone know anything about the Great Bend 220 FEL? Good or Bad?

Is there a way to block a poster so they won't appear when I read a topic? If so please PM me and tell me how. Thanks Eddie

Seen such false advertisement!!!!!!! web page

I know it's off topic but how do you get your pictures small enough to add to your signature?????

Anyone give me some instructions on removing injectors on YM1700? Thanks

I need to know torque specifications for YM1700: Rod Bolts Head Bolts Also valve adjustments on YM1700, I assume they are adjusted at TDC. Thanks in advance Eddie

Aaron, Is your email up and working again? I need parts information!!!!!!

Looks like I am going to rebuild the engine in my YM1700, either broke or stuck ring. I am hoping there is no damage to piston sleeve. I will have the head reworked and checked at an automotive machine shop. What do you think about this parts list? Anything else I need to look at? 2ea...

Started this season blowing blue smoke and using oil. All last season it used 2 quarts of oil, this season it has used 3 quarts already and smokes even idling. 770 hours, could I have a broke ring or just needs rebuild?

I did a search but didn't find what I was looking for. Can anyone give me some information on Yanmar F22?????

Does anyone know if there are seals or "O" rings where the lift arms connect to the shafts out of the housing in under the back of the seat. My YM1700 is leaking on both sides. Would like to fix if I can get parts.

Need information on 2020. Good, Bad, parts available? How does the shift work on it? I think it's a 3 cylinder motor. Any information would be helpful. Thanks!!!

Anyone know the number for an AC or Fram oil filter for the YM1700? I have the number for a Car Quest brand but they are like $9.00 for a simple looking little filter. I'm used to buying at Wal-Mart for $3.00

I have started adding temperature and oil pressure guages to my YM1700. I wanted to use T's so I can use the lights and mechanical guages, but I can't find a 16mmx1.5 T and nipple for the temperature. For the oil pressure I need a T and nipple that's 1/8-28 (BSP). ANY IDEAS ON WHERE TO GET...

The left brake sticks and won't release on my YM1700. Any ideas???? Thanks

I recently had my radiator recored, flushed the engine and installed a 50-50 mix of antifreeze and water. To what temperature will this protect my YM1700? Thanks

Does anyone know if a Yanmar front mounted blade that fits a 2210 will fit a YM1700. Thanks

I was washing the radiator with a water hose on my YM1700 the other day when it started leaking. When I took it out a lot of the fins were gone. I guess it was just rotten. It's good I have a friend that recores radiators. By the way what air pressure should I run in the rear tires??

Someone posted a picture where they had used a golf cart top on their Yanmar. I would like more information. Thanks Eddie

I bought a rusty finish mower and wanted to paint it. I went to Tractor Supply Co. and got a quart of "Ford Red". After painting the mower and connecting it to my YM1700 I was amazed at how well the red matched my tractor. I also have a paint code for the metalic green on the tractor to paint my...

I am interested in buying a YMM60 belly mower in the North Alabama area. I am told that it could be made to fit my YM1700. Anyone??? Thanks

Anyone know where I can get a set of decals for a RS1400 tiller? Also does anyone know the paint number so I can have some mixed for the green on YM1700? Thanks Eddie

I was running the tractor today using the tiller when the OIL LIGHT came on. I immediately stopped the tractor and found oil around the front axle. The oil filter had worked loose and lost the oil. I got a new filter, tightened good and refilled with oil. I can't tell that there was any damage...

What kind of oil do I use in the gear box on my RS1400 Tiller? It's low and it doesn't smell like 90wt rear end lube. Thanks

Has anyone tried turning the wheels around on their tractor to give it just a little wider stance????

I just purchased a YM1700 and have a couple of questions. 1. Under the seat on the left side there is an adjustment that has D & P. What is this? 2. Under the hood between the air filter and the fan there is a small white plastic jar that has a rubber hose out the bottom to the intake. What is...