Search results

Please let me know if you have ever replaced your Glass door with aftermarket products. I would prefer the comment response is limited to people with first hand experience. Here are my current options. Glasscab $448 + $110 delivery = $558 FarmPartsStore $431 + $135 delivery = $566 Local...

We have looked at many options and are down to two final options. (option 1) Part I of the project are the two ponds. We have interviewed, seen photo albums and seen completed work of a Company that does ponds only. They want a lot of money to do a 1/4 acre pond at 9 feet deep & another pond...

As you may or may not know (see other thread) a gas company approached us a while back. They want to run a 20 inch pipe under our property, and create a 30 ft easement. Everything is still up in the air. Nothing is definite yet. But my question is - where would you put the easement if you...

Last weekend while I was weed whacking and pruning and the boy was mowing the wife poured diesel in the lawnmower. It ran for about 5-10 minutes then blew blue smoke then stopped working. I didnt know about the diesel so i pulled the cord a few times and it started once or twice but stalled...

We bought 31 acres June 2010. Thursday, while I was out of town, we received a call from someone who said he represented Energy Transfer (a Gas Company) and he'd like to do a survey of our land so they could re-route a proposed gas line. He said it would run from somewhere near us to Mt...

We have power on our land. We'd like to plug our 26' travel trailer "in" so we can run air conditioning, the refrigerator and let the boys watch dvd's. Hopefully this can be done without hiring an electrician - money is tight. Here are 4 photos of what we have... Photo #1 - ignore that... my...

Yesterday I saw my new barn from the sky for the 1st time. It sticks out like a sore thumb. Lots of nice farms, fields, trees and then my bright shiny silver ufo. Can you say ugly!! I was silly to save the small amount of money - I could have easily done a colored roof - dangit. Anyway, the roof...

If I hook up an RTR2570 to an M7040 - what will happen? The RTR2570 is recommended for smaller tractors - but what would happen if a larger tractor was used to run it? :confused: Thank you

I will be shopping for spray foam insulation in the near future - can anyone tell me the difference between open cell and closed cell. We met someone who put open cell in his building (forget if he said ceiling or walls) & put closed cell in his building too (forget if he said ceiling or wall)...

2 @ 14x14 Janus 3100 doors & 1 @ 10x10 Janus 2500 door. The roll door installer is at the job site - I am at work - impossible to go look. He tells me eah door has a rubber strip included in the package - it is to avoid daylight and wind from entering the structure - he says it can be affixed...

I've used the search function but was unsuccessful. Anyone have familiarity (good, bad or indifferent) with concrete floor sealers? Is there one that stands out and is considered the best? Any recommendations? Are there any that are a complete waste of money? We are thinking we'd want to go...

The company doing our metal building asked where we wanted our pipe located for the plumbing - they want to do rebar tomorrow or Wednesday - we said we weren't sure - we elaborated and said we might want a total of four - toilet/sink/shower (bathroom) & sink (kitchen) - we asked for suggestions...

We are excited to announce our new 60x40x16 metal building thread. :thumbsup: Length: 60' Width: 40' Height: 16' Slope: 4:12 Roll Doors: 2 @ 14x14' & 1 @ 10x10' Walk Doors: 2 @ 3070 aka 3' x 7' Color walls: Lightstone Color trim: Brick red Color roof: Galvalume We are sending the deposit at...

60x40x16 metal building - primary intention is for hanging out, minor repair to dirt bikes/atvs, storage when we leave... ultimately hope to have a tv room, bathroom, bedroom and maybe a small kitchen. The building manufacturer wants approx $900 for their 3" R10 insulation on the ceiling (2400...

We are about to pull the trigger on our 60x40 metal building with 16' eaves and 4:1 pitch. Recently I've seen several pictures of buildings with only one roll up door and only one walk door. We were thinking of having a couple of each. Current contract shows 2 @ 14x14' roll up doors, 2 @ 3070...

LOL - Monday morning typo - Land Price MRL3572 = Land Pride MRL3572 I called & then emailed several Land Pride dealers Thursday afternoon and Friday morning - asking for a price quote on the MRL3572 (box scraper) - since it is not in stock each place said they'd have to let me know - no...

The final candidates are the Phoenix HD T15-72GE vs Land Pride RTA35 76 vs CCM SR-185 Heavy Duty 72". I had a similar thread in another section. I figure I'll post in the correct section this time. :) Anybody that has done the research or that owns one want to chime in - good, bad or...

It will be for our M7040 - thanx! Please let me know if you have experience with any certain Tiller - Land Pride or any other. I believe we'll want 6'. I am looking to save money if possible. I am money conscious but don't want to end up with something that is a piece of junk either. We will...

The tractor is being loaded on to a delivery truck in Kentucky as we speak. The trailer is getting its finishing touches - we pick it up on Monday. :cool2: I am literally "euphoric" "joyfully elated" "giddy with delight" (Yes - I used Merriam/Webster LOL). I haven't been this excited in a long...

Our new baby is ready for delivery. The Dealer was waiting for the cutter to arrive from Land pride. Please recommend - Post hole digger - we believe we want a heavy duty with a 9" auger to start. Initially we need to do a fence. Later on - the sky's the limit. Should we finance a Land Pride...

Bumper pull 20' + 2' with dove tail equipment trailer with 2 @ 7k axles. We believe we are in the final stretch - we hope to order the trailer today. We have two final considerations. Final questions: Is there a pro vs con of the leg jack location? It appears some are at the very end of the...

Cargo with implements is approx 10,000 lbs - tow vehicle bumper pull F250... New Big Tex trailers approx $3500 or more - 20' - 12,000 gvwr @ 83" wide New Big Tex trailers approx $3900 or more - 20' - 14,000 gvwr @ 83" wide Neighbor said would sell me his used Big Tex $3400 - 20' - 12,000 gvwr...

We need a pond dug - we are 20 minutes West of Houston. The land is pasture - completely flat and completely cleared. We want to keep all of the dirt but would want it moved several hundred feet to a different location on our property. If you know someone or if you'd be interesting in the job -...

In order to obtain the financing - Kubota is wanting insurance. So ok. I guess I need insurance LOL... I all ready called my homeowner - Fidelity - they said no. I all ready called my auto - Century 21 - they said no. I give up... who else is there beside Kubota? Or do most people just get it...

Does it make sense to get one with a 2nd valve - even if don't intend to use right away? Won't it increase the resale value? And isn't it better to be safe rather than sorry? Does it matter if the tires are loaded with water/anti freeze vs the typical fluid? What is the correct name for the...

Can anyone with an M7040HDC or similar size/weight tractor provide any type of information or recommendations? M7040 HDC, 1153 & QA 72", landpride 6' shredder, box blade. Tow vehicle is an 08 F250 - bumper pull hitch. - GVWR? Tractor approx 5500lbs. Not sure about implements... - What length...

If you go to a Dealer or if a friend has Kubota - How do you tell if it is a 2007, 2008, 2009 or 2010? I am being told some places sell a 2008 or 2009 as a new model 2010 - which is perfectly fine... zero hours is zero hours. But doesn't anyone wonder the actual year it was produced? Is...

We intend to get one of these two tractors. We'd like to start shopping for our tractor. L5740 HSTC - with FEL and probably one or two other items; shredder, box blade, disc Tractor weight - 4233 (Tractor with cab - but dont know weight of attachments) M5040 HDC - with FEL and probably one or...

We are down to two final candidates. We are leaning towards the M version because 1.) We dont want to have to buy a larger stronger tractor any time soon. 2.) We were told by a sales person at New Holland who worked for Kubota for 7 yrs that the L was the F150 and the M was the F250. 3.) We are...

Newbie here. It looks like we'll go Orange... :tractor: We considered the BX a couple years ago - we had easement land that was being ignored. Now we pay hoa landscapers $30/mo to mow it. We just bought some land and look forward to having some fun. We've considered the L model - we were...

Kubota factory installed radio w/cd/am/fm/weatherband = $427 or Buy one aftermarket? It looks like it might be prewired. Any other creative ideas? Thank you!

Can anyone explain the major differences - I know how to read the spec sheet and compare that way - but since I've never owned a tractor - all that info is greek to me... Is one more nimble than the other? Better resale? Less likely to tip over if used incorrectly by a newbie? We intend to...

I am a newbie - obviously. Motocross dirt bikes are cheaper outside of this immediate area... MS, OK and TN all have lower prices... not seeing that on tractors... We are leaning towards the M5640SUD or maybe the M5040 Hydraulic shuttle. Anyone have a recommendation on a dealership here in...

Newbie question- Can someone explain FEL and loaded tires. We intend to buy a tractor in the very near future... not familiar with these terms. Thank you

thread moved to brand specific forum