Search results

Results 1 to 50 of 55
  1. J.Wal

    Camera Security Systems???

    I just updated to lorex 16 channel NVR, 4 4K billets and 4 4K 4X zoom bullets. Ordering a few 2K cameras and 2 8TB hard drives for plenty of memory. Very happy with ease of install. Attached is a 4K 4X zoom camera then using digital zoom. The camera is about 100’ from my house ( ballpark...
  2. J.Wal

    Camera Security Systems???

    I run 2 systems. I have a Q-See brand 8 camera DVR. It has 7 cameras outside to record vehicles and activity. I have 2 canary cameras. The “ all in one” and “view”. The q-See system is hard wired and I have it set to record 24/7. It is a good system to monitor but not ideal for...
  3. J.Wal

    Finally a KUBOTA owner!

    Picked up a 6’ landscape (root) rake and a middle buster for $400. Was going for the rake only for $350 but talked them into $400 for both. No need as of now for a middle buster but for $50 why not. Lol
  4. J.Wal

    Converting bucket from pin on to SSQA, got a question.

    Got it done using the reconditions on the everything attachments video.
  5. J.Wal

    Converting bucket from pin on to SSQA, got a question.

    Found a video by everything attachments. It explained you want to be 2” higher than the loader arms when sitting on the ground. Mine ended up being 18” off ground plus 2” so 20” is my location.
  6. J.Wal

    Converting bucket from pin on to SSQA, got a question.

    Ok folks. Need some feedback. Converting my pin on bucket to SSQA. We have cut the factory pin mounts off the bicker and I have mocked the universal plate in place. In the photos you can see the white line on the bucket. That represents the level the top and bottom pin mounts were located on...
  7. J.Wal

    Planning to get a Millermatic 211 pros/ cons?

    Planning to get a Millermatic 211 for DIY stuff around the house/ tractor. Like the ability to do 120/ 240 with a simple plug change, multiple sizes of are both regular and flux core. I played around with welding back in high school and loved it but got into law enforcement and finally got...
  8. J.Wal

    Portable generator powering most of house in power outages.

    I used the FEL on my Kubota to unload the full drum. It is under a metal carport I store firewood under. It’s about 10- 15 yards from my shop.
  9. J.Wal

    Portable generator powering most of house in power outages.

    Added fuel storage to the system. Got a 55 gallon drum that had 5-W20 oil in it before I got it. I used 2 or 3 gallons of gas to thin the remaining oil and dump it out of the drum. I used the Fill-rite hand pump setup. It produces more gallons per stroke than the crank style. I have a 5PSI 2...
  10. J.Wal

    Views from the Operator's Seat

    Ready for this time of the year again! It’s coming!
  11. J.Wal

    pto backup generator

    I just recently setup a generator for the house. Wanted easiest setup for wife or anyone I needed to set it up when I am out of town. It’s a champion power equipment model 100110 ( 9,200 running watts, 11,500 max watts). I have a interlock switch to prevent the main breaker and generator...
  12. J.Wal

    Standby Generator

    I opted for a standby to plug into the house, backfeed the breaker box with a interlock on the main/ generator breakers. I found this to be the most cost effective generator setup for most all items covered. I have about $3,000- $3,300 total cost of generator, interlocks, cords, electrical work...
  13. J.Wal

    Portable generator powering most of house in power outages.

    Really excited to finally get everything set up. Figured I would share my setup with everyone. Using a portable generator to back feed panel. Safety panel interlocks in place! Total cost right at $2,570 I often loose power due to living so far out in the country. Until now I have had to run...
  14. J.Wal

    Finally a KUBOTA owner!

    Gonna try again. Thanks for the feedback also! Glad to share stuff and it help others! Links to products used for he phone mount at bottom of this post. I did use 2 1” square pieces of metal behind the plastic housing to give the nuts something solid and large to prevent/ or reduce the risk of...
  15. J.Wal

    New camp chef woodwind smoker

    Put it on high smoke (220) for 2.5 hours... then bumped it to 275. Once it hit 165 I pulled it and wrapped it in foil. No waiting for it to hit 195. I will then pull it, let it rest for 15- 20 min then cut into 3/4” cubes and go back on for about an hour.
  16. J.Wal

    New camp chef woodwind smoker

    Model is a “ woodwind” I have put a run on the cut and letting it set for 24 hours or so.
  17. J.Wal

    New camp chef woodwind smoker

    Got my new smoker in as the title shows! The woodwind by camp chief. First thing I am gonna do is poor mans burnt ends. Using a 2 to 1 mix of competition blend pellets and cherry pellets. I will update as it goes!
  18. J.Wal

    Help me decide on a welder

    I would like a 110/ 220 capable welder. I want one that will allow me to grow as a fabricator from minor projects to heavy work if ever needed. I used a 110 Lincoln when I was I was in HS auto body class and loved it. I now have a tractor and want to be able to add stuff and fabricate stuff as...
  19. J.Wal

    Rotary Cutter Decision Ideas

    Picked mine up yesterday! **** of a good product. Will be ordering more stuff from them!
  20. J.Wal

    Finally a KUBOTA owner!

    Got the chains and ratcheting binders finally so I can transport the tractor safe as possible! Got a great deal on all 5 binders and four 10’ 3/8” chains for little less than $200
  21. J.Wal

    TODAYS SEAT TIME

    Thursday - Saturday I got some time in burning some brush in the front yard. Took a few trees down and added them to the pile. Never had so much fun doing yard work!
  22. J.Wal

    Good deals from Craigslist, that will not sell here!

    Here is a deal for anyone wanting it! [emoji38][emoji38]
  23. J.Wal

    Good deals from Craigslist, that will not sell here!

    I picked up this King Cutter side discharge for $275 late fall. It needed a tire, but it will do all I need! Once I cut and find the high spots in the yard I will knock them down and then replace the blades! Facebook marketplace was the place I found it!
  24. J.Wal

    TODAYS SEAT TIME

    Took down 3 trees and moved them to burn piles. I use to dread trees before I got my tractor. Now I just cut them down and move them then cut into smaller chunks!
  25. J.Wal

    How do you carry your chainsaw ?

    Added some 1” bars to hold some rail for extra weight on my box blade... holds chain and my saw! Use the 2” receiver to hook the chains to. Box blade is ballast, tree hauler... all in one!
  26. J.Wal

    3pt Carry All

    Finished mine up yesterday!
  27. J.Wal

    3pt Carry All

    Just did mine this last week. Still haven’t decided on how I am gonna do my sides.
  28. J.Wal

    Idea for a 2 in one attachment. Thoughts?

    I am wondering if anyone else would be interested in a rear blade / landscape rake combo. They would use the same frame and you could detach one in exchange for the other. I am hoping to get enough good feedback that E.A. might pick it up and make it happen with their current 6 way blade frame...
  29. J.Wal

    Finally a KUBOTA owner!

    Built a carry all. Bought the frame from tractor supply, $165. Then got my lumber and bolts from Lowe’s, $100 or so. Used 1/2”x 3” Carrage bolts with flat washer, lock washer and nut. I had tried a lock nut at first but due to not being able to hold the head of the bolt... it would just spin the...
  30. J.Wal

    Security & Theft Trailer size feedback wanted

    I have a Grand L 3130 Kubota with FEL. I am not buying a trailer any time soon, but always watching the market places for sales and private sales. If I find a deal, I want to know what I need. It’s no deal if it won’t do what I need it to. My tractor is 3,200 lbs ( not sure if this includes...
  31. J.Wal

    Finally a KUBOTA owner!

    Picked up a box blade used and decided to add some weight for both better digging and a counter weight. The 2 3’ chunks of railroad are from a French high speed line and are heavier than regular track. They come in at 177 lbs per 3’. Also had a receiver hitch added for moving trailers around the...
  32. J.Wal

    Finally a KUBOTA owner!

    Got some high speed rails on the back of the box blade for box weight/ overall counter weight. Note how thick the web is. The one photo is of the slug from the holes getting cut though it!
  33. J.Wal

    Rotary Cutter Trying to decide on brush cutter.

    Went and looked at it. Would be too heavy and too wide for my 3130. But a dang heavy duty brush cutter though!
  34. J.Wal

    Rotary Cutter Hoping for some help with Sidewinder Brush hog

    Went and looked at it. Would be too heavy and too wide for my 3130. But a dang heavy duty brush cutter though!
  35. J.Wal

    Rotary Cutter Hoping for some help with Sidewinder Brush hog

    Did find this but website is no good.
  36. J.Wal

    Rotary Cutter Trying to decide on brush cutter.

    This just came up on local site: good price. Any feedback on it for my L3130? Will my tractor have any issues with it? 6’ ( may be 66” not sure yet)
  37. J.Wal

    Rotary Cutter Hoping for some help with Sidewinder Brush hog

    I have found a 6’ Sidewinder Brush hog for sale locally for $800. It is said to be in working order, no issues. I love the design. Simple yet effective. I have read great reviews of it eating anything the tractor can go over.... but from people pulling 7’ ones behind 70HP tractors. It’s said to...
  38. J.Wal

    Clean light bar on ROPS?

    Just installed 5 LED pods. Really happy with the outcome. 5th pod is magnetically mounted right over the PTO. You can see it on the one photo.
  39. J.Wal

    Finally a KUBOTA owner!

    Just picked up a 5’ king cutter finish mower for $300. Needs a wheel and some blades.... but very happy with the cost!
  40. J.Wal

    Rotary Cutter Trying to decide on brush cutter.

    Bad Boy on top, E.A. On bottom
  41. J.Wal

    Rotary Cutter Trying to decide on brush cutter.

    I am comparing the Bad Boy 5’ cutter the Everything Attachment 5” cutter for my 04 L3130 shuttle shift. ( 31HP, 25HP at the PTO) I will be using it in wooded areas and will need as heavy duty as I can get for a 5’. Both are very similar. The bad boy comes with a higher Hp gear box ( 50 vs 45)...
  42. J.Wal

    To level ground or not

    I am planning on putting one of the metal carports up to cover my tractor. It will be long enough to cover FEL, tractor and bushog with a few feet overhang in front and back. The ground slopes slightly from right of photo to left. I plan to put down crushed concrete from my existing driveway...
  43. J.Wal

    Finally a KUBOTA owner!

    Sounds like I got a good deal and a good machine! Picking up a Woods 65” box blade tomorrow. $350 and a 5 min drive from my house to get it. Only bad thing is it doesn’t have the ripper teeth. But can add them with time.
  44. J.Wal

    Loader Quick attach adaptor

    Is there a reasonably priced quick adaptor for the loader side? EA has one for $830 but really hoping not to have to spend that much for the ability to change attachments faster.... I understand it cost to play but seems like a lot for the product. Anywhere I should look for a used one or...
  45. J.Wal

    Anyone ever use a carport kit for a workshop

    I love my metal carport. $710 delivered to my house. Got 6’ wood fencing section, stained it and it blends in with the shop behind it! Now that I have been told ALL L series Kubota tractors have the same key, I want to enclose the ends with at least a heavy duty bar that will prevent someone...
  46. J.Wal

    Finally a KUBOTA owner!

    I plan to do a taller shed. ROPS are up and in place and probably won’t come back down, no need to. I don’t have tires loaded yet, but will get that done. Got to find out how. Just found a hydro leak on the line with the red cap hanging off it in the photo. ( magnified the area of the leak)...
  47. J.Wal

    Finally a KUBOTA owner!

    Picked up this 2004 Grand L3130 shuttle shift yesterday! 900 hours, documentation of services and the dates of service. Payed $13,800 plus a 3 hour drive one way to get it! No implements yet. Got to decide between a 5’ or 6’ brush cutter, then a grapple and extra hookup to run it.
  48. J.Wal

    Buying Advice Planning to buy used.... got some questions.

    Here is a follow up. Happily found me a tractor! I found a Grand L3130 shuttle shift with 900 hours, full service record 2.5 hours from me for $13,800. 1 owner before, a military man. He passed and his wife contacted the dealer they bought it from to sell it back. No implements yet, but plan...
  49. J.Wal

    Buying Advice Planning to buy used.... got some questions.

    Here is an idea of what I am maintaining / recovering. Some areas need work. Once it's all recovered, then it will just be maintain. This is just the small part of the back. If you look, I go back about 2 more acres from the top of the hill. It is not as clear and needs work. I want...
  50. J.Wal

    Buying Advice Planning to buy used.... got some questions.

    I recently used my uncles Kubota L4400 to bush hog my back yard area. I am on 5.5 acre. I plan to buy a used tractor in the 35hp range. I am located just outside Memphis TN and want a brand that has a dealer within a hour drive. I for sure have to have 4x4 and a FEL. My first question is, how...
 
Top