Search results

Results 1 to 50 of 200
  1. D

    Tecumseh OH160/Case 1816

    Dad bought a used 1816 30 years ago, with no engine. He bought a new Tecumseh OH 160 through Padgett sales near Indianapolis. If I remember correctly, the standard crankshaft size is 1", but the 1816 OH160 engine crank was like 1-1/8" on the drive pulley end. They had a bushing that would size...
  2. D

    Tecumseh OH160/Case 1816

    You might try doing a search in the Sears garden tractor section. I know they used that engine in the ST16 model, as I had one. I read up on them and most common problem was the ss ignition module, which is now N/A. But, have read threads where guys have simply cleaned, and adjusted the...
  3. D

    Farmall A engine confusion.

    I will look like this. Otherwise, there will be a cast iron elbow That is like in the second picture.
  4. D

    Farmall A engine confusion.

    My U-123 doesn't have a water pump either.
  5. D

    Farmall A engine confusion.

    Run all of the numbers on the block on Google, and see what comes up. On mine, the identifying tag was on the bell housing for the belt pulley unit that was attached to the engine. Mine came off a 55-T square baler.
  6. D

    Farmall A engine confusion.

    Looks like a U-123 power unit. I have one on my Farmall A, installed it myself. It came off a 55-T baler.
  7. D

    Craftsman/Kobalt/Tekton/Pittsburg Sockets/Wrenches -- General Thoughts/Question

    Auctions, swappers days, and flea markets, with vendors that have used items is where I have picked up many USA made tools. I never seem to have enough 1/2" or 9/16" wrenches. Too many little jobs of tearing something down, and I leave the tools I used with that little project, until it's put...
  8. D

    Case 580D Parts and Model Year Search

    Model year is determined by the serial number. On newer models, the serial number plate is mounted on the left side, inside the cab/ROPS,just above the floor plate. Here is a link to Case Construction: Case construction king loader backhoe | Case CE | MyCNHi US Store When you open the...
  9. D

    Smoking farmall a

    The Motorcraft B82 is another great plug, if you can find them.
  10. D

    Smoking farmall a

    Dry with carbon build up, and black smoke ususlly indicates running to rich on fuel. If your plugs show carbon, plus oily residue, you're getting oil past the rings, or valve guides. The standard plug was a Champion D15Y or equivelent. It was common to step up to a hotter plug to get by for a...
  11. D

    Smoking farmall a

    The spark plugs will tell you a lot too. If they have an oily residue on them, not carbon buildup, more than likely. it's the rings. My BN's rings were so bad, plugs would foul out after about 45 minues of run time. An over bore sleeve/piston set, crank turned .010 with new bearings, and valve...
  12. D

    Filling a cistern

    Got a gravel pit close..?? Concrete, or fill sand would probably be better to work it's way down around those chunks of wood. Make a slight mound as mentioned, and every time it rains, it will wash the sand down around those pieces of wood. You could pull out what you can to get a good start...
  13. D

    Best Place to Buy Parts

    You may be able to find a decent used fuel tank, and oem cap in a salvage yard. With todays technology they should be able to take pictures of any part, and send them to you. I believe all yards have a money back guarantee. Most have reasonable rates on shipping too. Here's a list of 10, 240's...
  14. D

    Farmall Super A froze?

    Since they have wet sleeves, could be a cracked sleeve, or cracked block internally where the sleeves fit into the block, or even a leaking o-ring on a sleeve. Those are more common thana cracked head, normally in the valve seat. Drain the oil pan, and remove it. Pour water in the radiator...
  15. D

    Case d530 ck issues repost

    Hopefully you're right. Just trying to diagnose from writings and description, rather than hearing it is tough to make a call. Anymore, don't have a clue about buying parts. It's been 20 years since I've done a major OH on anything. Maybe someone else will chime in on that. As far as...
  16. D

    Case d530 ck issues repost

    I'm going to take a wild guess, and say it sounds like the engine spun either a rod, or main bearing. The metallic residue you're seeing in the oil, is more than likely the babbitt coating off said bearings. You'll need to drain the oil, and remove the oil pan, and have a look see. Running the...
  17. D

    Help with trail hill constantly washing out

    Depending on how much room you have to work with, you could also totally revamp your road, and build switchbacks, (yeah, not going tp be cheap) zig-zagging down the hill to soften the grade, plus use some of the great idea above, keeping grade between 7%-14%, and water bars to get water off the...
  18. D

    bearings gear box 743 bobcat

    If you have that bearing in hand with the part number, you can run it through Google, NAPA, or Motion Industries https://www.motionindustries.com/ and possibly they will cross the part number to Timken, or SKF. Personally, I've been buying NOS Timken/SKF bearings for a few small IH tractors...
  19. D

    Final drive out of my Bobcat 743

    That vendor went out of business a number of years back. But, I did find a seller on ebay, who carries quite a stock of NOS Timken, and SKF bearings. Here is a link to his ebay store: Items for sale by patriot_bearing_supply | eBay Run your part numbers through the search for his store. If...
  20. D

    Farmall Super A Clutch problem

    Open this link to the Case/IH online parts book, showing an exploded view of the clutch housing, and controls. Schematic, Manuals, Specifications and Diagrams for Chassis, clutch housing, controls and connections | Case IH | MyCNHi US Store It sounds more like the problem may be with the...
  21. D

    case 530 manual desperately needed

    The ser. # on my 310B I had was on the cowling ahead of the dash, and was missing too. Case was notorious for changing parts in a production run at certain serial number breaks. Thank goodness some engineer had intuition enough, that at least the parts I needed had a part number either stamped...
  22. D

    case 530 manual desperately needed

    This may help you out, until you find a hard copy. Case 530CK - Manuals
  23. D

    Potatoes

    Here's my potatoes so far this year. Bought 50 lb. of Dakota Pearl #2 seed potatoes. Usually #2's are small, and I plant whole. 80% were huge, and had to cut them. Some had enough eye's, and large enough, I cut them in 4-6 pieces. Instead of the 2 rows I had intended, I ended up with 7. I found...
  24. D

    Sunflowers are showing out

    Awesome..!! Are those Black Oilers..?? With the plant spacing, curious as to what you planted them with. Will you harvest them, to sell the seed..?? I've had a love for Sunflowers since I was a kid. My Grandma got me a multiple seed pack when I was around 5 years old, and some Sunflower seed...
  25. D

    Thinking about replacing the MF135

    If the 135 is in decent shape, and meets your horsepower requirements, like some of the others, I'd consider geting the ROPS, and setting the adjustable wheels out to make it even more stable. I'll assume you have the pressed steel center dish, and looped rims where they bolt on. If the loops...
  26. D

    Tire won’t take air.

    Not worth it for one tire, but do a search for a bead seater tank. I've wrestled/strapped tires from the size you speak of, to 12 ply trailer tires that were stubborn about popping out on the rim. I lucked out 2 years ago, and found a nice used Cheetah brand locally on the FB Marketplace for...
  27. D

    Case 580ck torque converter

    Do a Google search for "Case 580CK won't move." If I remember right, the washable sump screen for them gets plugged, causing the problem. Even more so when it's cold. Hopefully you got a service manual with it, if not, you might find an oem copy on ebay reasonable. They are 3"-4" thick, and...
  28. D

    Case 430 Purchase

    Looks like it has either the dual range, or triple range transmission. Ought to find a suitable speed for about any job with that..!!
  29. D

    Farmall Super A carburetor

    Before buying another carb., remove the elbow where the fuel line attaches to the carb. There should be a strainer on the other end. Sounds like it'splugged. Remove, and backflush with spray carb.cleaner. Re-install,and check for fuel flow.
  30. D

    Case 430 Purchase

    Is it a Case-O-Matic model..?? ie: Torque converter instad of a clutch. Those models scan be pricey to repair in the drivetrain. If it has a clutch, decent old tractors. A lot would depend on the hours, a diesel can be more expensive to repair if it's got a good many hours on it.
  31. D

    Gardens for 2021 season

    To ne honest, I can't remember which one I got it from. It was from one of 6 or so that send catalogs out in the Spring. Pretty disappointing to say the least.
  32. D

    rear differential linkage 385 Case

    Hopefully this link to the Case/IH online parts store will help, if you haven't found what you're looking for. Case ih tractor (p.i.n. 5001 to 5287 & p.i.n. 18001 & after) | Case IH | MyCNHi US Store
  33. D

    Case 580ck

    I ended up taking mine to a local hydraulic shop that does a lot of heavy equipment cylinders. By the time I bought a decent spanner to remove the end, and the seal kit from Case, plus if IIRC, torque the end back to 400+ ft. lbs. I let them do it. They did it for $75, approx. what I would have...
  34. D

    Gardens for 2021 season

    I ordered/planted 2, Montgomery sour cherry tree 4 years ago, from a respecatble online nursery. Last year was the first year for only one to get cherries on either, but the birds picked them off while small and green. Being proactive this year, I got netting big enough to cover the one with...
  35. D

    IH 424 governor/ throttle issue

    Well darn, thought I'd figured it out. It's really got my curiosity up now. That's why I was looking for an exploded view of the throttle assy.. to see if there is some sort of spring attached to the lever under the dash. Thereis normally some sort of friction disc under there, with spring...
  36. D

    IH 424 governor/ throttle issue

    The only adjustment I'm aware of with what I have, is the yoke on the carb. side. And that is set with the throttle lever set to WOT. You then remove the pin from the yoke, then adjust the yoke with the linkage pulled forward as far as it will go, then adjust the yoke so the pin slips back into...
  37. D

    IH 424 governor/ throttle issue

    That spring holds tension on the cross shaft fork, that rides on the thrust bearing, which is controlled by the flyweights. Unless that thrust bearing has totally disentigrated, I'd have to speculate either the fork is broken, or the fly weights are stuck, not allowing centrfugal force to let...
  38. D

    IH 424 governor/ throttle issue

    Welcome...
  39. D

    IH 424 governor/ throttle issue

    It sounds like the internal spring in the governor has brioken. ( See part # 10 in this exploded view) Schematic, Manuals, Specifications and Diagrams for Governor | Case IH | MyCNHi US Store You may need to replace the thrust bearing too, # 31 in the exploded view. A fairly easy fix, unhook...
  40. D

    Case 580ck

    Pretty sure you'll find the cylinder part number stamped on the trunion end. Even with the parts manual, you'll have to look and see which cylinder you have. Case was great at changing parts through a production run, with breaks at certain serial numbers.
  41. D

    Gardens for 2021 season

    My old 'puterwent up in smoke last Sunday, so been out of touch with the world. Finally got in passwords reset, and able to post again. Been busy in the garden with the cooler dryer weather. Got the tomatoesmulched, T-posts driven, cages up, and 3 courses of Florida weave to keep them upright...
  42. D

    Case 580ck

    Open this link,and see if it will help what you're looking for. The 33 hoe was used on several models. I had one on my old 310B. Case 530CK - Manuals
  43. D

    Looking for a welder

    I have 2, Millermatic 200 MIGS. Both bought at auctions for $400, and $300. Both work great, and I love them. You can weld up to 1/2" in a single pass. Didn't really need the second one, but for $300 I couldn't pass it up. Even had a full tank of 75/25, and extra complete gun, and NIB roll of...
  44. D

    Hunting Seals for a Ford 905 PHD

    Dropping the BU from the part numbers, I ran the P/N through Motion Industries, https://www.motionindustries.com/products/sku/00613181 then that number through NAPA online, and came up with https://www.napaonline.com/en/p/NOS24954?impressionRank=3 for the bottom seal. Front seal through MI ...
  45. D

    Anyone build their own small no till seed drill?

    This is the web page for the Renovation Clover. Renovation White Clover The answers to both your questions are both no and yes. Until it get well established this year, I probably won't see the results until next year. As explained in this article...
  46. D

    Anyone build their own small no till seed drill?

    Can't answer that one either. I sowed in Sept., and got the benefit of the Fall rains here. I'm sure your local County Extension Agent could answer that, plus recommend a suitable cover for your region. Your tax money pays for that service, might as well get some benefit from it.
  47. D

    Anyone build their own small no till seed drill?

    Really can't answer that one, as I've never dealt with them. But, I'd guess the sharpness of the blades on what your cutting with, ground speed, and how your cutter deposits the cuttings would have a lot to do with how fine it chops it up. Making a second pass if it looks like it's not fine...
  48. D

    Anyone build their own small no till seed drill?

    You may want to consider something like Renovation Clover. It's a white clover that get's 16"-18" tall. I sowed some in a mix in my hay field to provide Nitrogen, instead of applying Urea. Too many times they've called for 70-80% chance of rain, so I applied the Urea, only to get sunshine for...
  49. D

    Anyone build their own small no till seed drill?

    Are you planting into ground that you took a crop off of..?? And what are you wanting to sow..?? I sowed Oats on my small potato patch last year in Sept., intending to get 8"-10" tall cover crop, then get a winter kill. I disked it up with a pretty aggressive cut on the disk, Sowed the Oats with...
  50. D

    Farmall BN

    Although there is a cover plate where a pump can be bolted on, at least on my'47 BN, I'm pretty sure the steering shaft will be in the way.
 
Top