Search results

My 4110 started blowing meter panel fuses when a family member was using it. Fuses would blow over a period of time, and not immediately. I didn't have a handy 15 amp fuse, so stuck a 20 amp in to see what it is doing. I found that when the clutch is pushed in the glow plug lamp is coming on...

This month marked the seventh anniversary of my purchase of my Mahindra 4110. The red beast will turn over 700 hours sometime in the near future. I thought I would mark the seventh anniversary by giving a brief evaluation of my tractor's service. The 4110 has done a little of everything for...

My wife's BIL has had trouble with his 40+ year old 430 Case he inherited from my late FIL and haying with it this year has been problematic, as the gas keeps boiling in it. My Mahindra 4110 was first pressed into service using the CCM 165 drum mower he bought new last week. The Mahindra cut...

Has anyone converted one of those big cumbersome canister filters to a spin on? They aren't real handy to change, and the rubber hoses on each end of the canister seem misaligned with the canister and which leads to premature hose failure. I'm not real proficient in hydraulics, would this...

I asked my Mahindra dealer about baling square bales with my 4110 today using an older NH 273. He said he should pose no problem, especially since I have loaded ag tires. The 4110 pushes the 4000 lb mark to begin with, and with loaded tires and a FEL is pretty hefty for a CUT. He said he...

I've got an oil leak that is coming from the cap at the bottom of my final drive on my 4110 Serial #4110 y03010xx This is the newer model, I bought it in '05. It is part #23 in the attached image. The cap sits lower on the side that leaks than on the other side, and I can push the cap back up...

I was in the market for a used rider and my son-in-law had a buddy he worked with who has a neighbor that had a used Craftsman rider for sale. I had to take my daughter to a softball game and had my wife and son-in-law look at it. When I got back home there was an old White rider sitting on...

It's time to change oil in my 4110. Last time I used a Puralator Pure One PL14619 filter and Pennzoil 10W30 oil. I've always had good luck with Pennzoil. What's the current prevailing wisdom here on the oil and filter issue? I know all filters and oils are not created equal.

The two newest Mahindras, the 5525 and the 6025, look like a good deal for value priced machines. The 6025 has 49 PTO HP, making it about the right size for using on small haying operations, where a square baler will be used. These tractors are available in 2wd only with an 8X2 tranny.

I have decided that the time has come to mount a toolbox on my 4110. The little built in box under the floormat just isn't big enough. I have thought about mounting a box on the right hand step, since I don't get on and off that side of the tractor much, due to loader controls. My only...

OK, folks, what is currently on your near term attachment/implement wish list? I plan on hitting the spring equipment auctions in search of a 6 ft 3pt disk and a cultipacker.

While people agonize over some aspects of a tractor purchase, e.g., should they get gear or hydro, should they get 2wd or 4wd, people way too often don't fully take the time to study the PTO choices available and use it to determine which tractor best suits their needs. Not all tractors in the...

Has anyone run a sickle bar mower on their 4110? What models work the best, and which ones have trouble?

...I was out pushing and clearing more brush yesterday and in the middle of the bramble was a downed 6" tree. The edge of the tree's limb must have caught the level indicator rod on the bucket and bent it without my noticing it. When I went to curl the bucket I bent the rod nearly double. I...

Walmart sells a tractor transmission-hydraulic fluid that is supposed to be equivalent to all the name brand fluids that the dealers carry. Its name is Tech something or something Tech. Has anyone tried this fluid? It runs under $30 for a five gallon bucket, which is significantly cheaper...

Has anyone tried the tractor hydraulic-transmission fluid that Walmart sells? How has it worked in your Mahindra?

I was cleaning some big time brush and bramble this evening and punctured what appears to be a hydraulic return hose. The hose is about five inches long and about 1.25" in diameter. It is located under the right hand side of the tractor under the operator's station. It appears to be made of...

Now that my Mahindra 4110 is getting plenty of summer use I need to start planning for next spring's garden work. What size of plow and disk are best suited for the 4110? I was thinking along the lines of a two bottom 14" plow and a six foot 3 PT disk. The soil is heavy clay, so I know I...

My 4110 will arrive at its new home about the same time I do on Tuesday afternoon. I can't wait to put her to work!!! It could have been delivered this past week, but my schedule didn't free me up to go check it out until Wednesday afternoon, and didn't allow me to be home to take delivery...

...I'm still waiting on the 4110 delivery. The dealer told me on Friday that the shipment that it was ordered with should be in Monday. Hopefully I can get it home by late next week. Once it is in the dealer is going to widen the tires and load them, plus weld some hooks on the bucket for me.

I stopped by the Mahindra dealer last night, and ordered my new 4110. The dealer called back today and told my wife that the newest addition to the family should be in next week. The tractor with FEL, quick attach bucket and ag tires was $19,350. He is going to load the tires for me and...

Gang, thanks for answering many questions over the last few months. I have now placed my order for the new tractor and it may be in as early as next week. Early on I considered if I should opt for a small utility 2wd with loader, or go with a bigger CUT with a loader and 4wd. I opted for...

I have located a 2120 at a dealer about 40 miles away. What kind of PTO HP does this tractor have? It is an MFWD and they want $10,500 for it. I want a utility compact that will be able to handle a 2X14 plow and a 6 foot BH. Any idea what it would cost to retrofit it with a new loader? 2120

I finally got a chance to visit some dealers today, and one of these was the Mahindra dealer. I was very impressed with the 4110. This tractor has good weight for a CUT, and handles great. The loader was smooth, and easy to operate. The dealer gave me a price of around $19,400. That's the...

What are the major differences in the CUT 4540 and the Utility 4340? How do they compare in price?

I was looking at the specs for the Mahindra ML112 loader, which comes on the 4110, at some of the dealer sites online. They list the lift capacity at the pivot pins for the loader at 1550 lbs. The Mahindra website list the lift capacity at the pivot pins as 1972 lbs. That is a 422 lb...

I spoke to a Mahindra dealer on the phone the other day about a 4110 he had at his dealership. I had a nice discussion with him about the 4110, and he seemed to be most impressed with the machine and the dependability that the 4110 has. He told me that he purchased one of them for himself...

What kind of price range should I expect to encounter for a TC40A or TC45A? Both would be with the 16LA loader and R1/Ag tires.

I've been putting in a lot of time looking at the specs for the various CUTS with MFWD in the 40HP range, and also even looked at some of the 2 WD value priced utilities in the 40-50HP range. Our farm has a lot of hillside on it, so stability is a concern of mine when choosing a tractor that...

I am planning on purchasing a CUT this spring, and am beginning the looking and learning process in preparation for the decision. Kubota has so many model numbers and extensions of those model numbers I am not sure what to look for. On their website they mention an L4300 (is this the same as...

When I was checking prices of the Deeres I found that the '03 series 2wd is very comparable in price to the 990 with MFWD. Our land has plenty of hillside and a loader is a must, which is the reason I was leaning toward the MFWD. However, I now see that the basic utility tractors, like the...

I plan on purchasing a 40hp compact or utility tractor with MFWD and FEL this spring. The 990 has a good price on it, but I have some questions about specs and capabilities I thought some on here might be able to answer. What exactly is a contiuous live PTO? Is the 990 capable of running a...

What kind of price should I expect to encounter for a Mahindra 4110 w/FEL and R1 ag tires?

What kind of price range should I expect to encounter for a DK45 w/FEL and R1 Ag tires?

I am planning on buying a new or decent used CUT or small utility tractor sometime in the spring. I own horses and plan to use the tractor for hay (mostly moving, cutting and raking, as my father-in-law has a 4000 Ford that we use for bailing), build more fence, bush hog pastures, clean barn...