Search results

Finally got around to replacing the loose inner tie rods on the 4300. When i say loose, i mean they had about 3/16" axial play. I would watch the tires wobble in and out while driving straight. I checked with JD, and they wanted $100+ per tie rod end. Did some research and found that the Moog...

Moved from the JD Ag Tractor forum. It is time to rebuild the 430 loader on my wife's 4300HST 'garden' tractor. The loader holders are in serious need of repair/replacement. They had been repaired prior to my purchase of the tractor, and now I find cracking of the repair welds. The right side...

It is time to rebuild the 430 loader on my wife's 4300HST 'garden' tractor. The loader holders are in serious need of repair/replacement. They had been repaired prior to my purchase of the tractor, and now I find cracking of the repair welds. The right side holder is also pretty badly bent. I...

The QD plates on my 430 loader are shot. Welds are cracked and links are bent. Damage occurred in the 4000hrs of use before it became mine. Looking around, i see several 300cx loaders at auction from burned tractors. As ther burn is around ther motor, the QD plates are not affected. The...

I finally got around to installing the replacement gage cluster for my 1998 Deere 4300 HST and when I started it up the tachometer is sweeping in reverse direction. Idle reading is about 800 rpm, but when i rev up, the needle sweeps down to the zero peg. While I wait for a reply from the seller...

My 5670 4x4 tractor looks like it has blown a seal in the right side steering cylinder. It it streaming fluid when i turn left (extend cyl). Anybody out there familiar on how to repair one of these cylinders. Tractor is down until this is fixed.