Search results

I think it was that I had the flail running on the ground, and I was cutting over a area that was matted from a prior sidebar mower cut done about 6 weeks ago. The gearbox oil was fine. Yesterday with a grade 5 2"x5/16" bolt as the shear pin, I mowed for about 1.5 hours with the flail runners...

I was browsing the posts to find out where a shear pin would be and I looked at my PTO shaft and voila! Here's the problem! Easy to fix. Sorry - I had no experience with PTO shafts until now.

I got a Sanking 61" flail a couple of days ago on Amazon for $2450 - model BGCI-155. With a lot of issues, I finally got it set up and it ran well for less than 100' but then the hammers stopped rotating. The PTO to the gearbox is fine, but there is no rotation out of the gearbox to the the...

I also got a new Banking 61" flail a couple of days ago. Got it set uo and it ran well for about 50' but then the hammers stopped rotating. The PTO to the gearbox is fine, but no rotation out of the gearbox to the the belts. Very poor documentation - in a drawing, I found a key near the...

I thought I was well prepared to do this on my Series 3000 model 3225 - had papers on the floor, a catchbasin, rags, the replacement filter ready with oil on the gasket seal, and had jacked the tractor front end up 8". I unscrewed the filter and quickly tried to swap filters - oops, the nipple...

I have a Cub Cadet model 3225 that has about 425 hours on it. I bought it new about 8 years ago and have been quite pleased with it. Today, I was using it with my snowblower attachment and lost hydraulic power. First the hydro lift failed to actuate, and then soon I lost power steering and...