Search results

I get a pretty good kick outta watching (and hearing) my beagle hound run squirrels and chipmunks in my yard. She likes it too, it's like she was bred for it. She does exhibit some unsportsmanlike behavior, she just carries them around and chews on them till she gets bored, never eats them...

I wonder if he showed up?

I have this oregon 22 ton with a Honda engine. No complaints. To my surprise, I could not find a picture of mine on my phone. I just attached a Google images picture.

We are suspicious

I'm here

I know this is a copperhead, yours looks close

Sold my 16ft utility trailer while it was still in good shape. Seems like I had it overloaded every time used it. Local dealer ordered me a PJ 20ft CE. It has 5200lb axles, primer and powder coat, pinstripe delete, winch plate, and rear slide in ramps. So far I am happy with it.

This fella snuck up on me when I stepped outside to mix some thinset so I bashed his head in. Then I couldn't help myself, I went and started laying tiles. After 10 minutes I asked my wife to go get my big yellow level, I left it outside (next to the dead copperhead). My 5 year old had a neon...

I bought this set, it actually goes on an air chisel. I would call any wrench that fits properly the right tool. Adjustable, combination or specialty. Using an air chisel to grab a corner will work. I would not call that the correct tool since it is somewhat destructive.

This is what's left of the shower I removed. Plugged the drain/vent off where it teed off. Shortened the copper pipes below grade. Been framing, wiring, sheetrocking and painting.

My business card

I like these better than yingling. Cost less too. I buy yingling lite when I want to feel upper crust elite.

Our lopi had one of the motors burnt up on the blower when we moved in. I replaced them both with some fan motors I tracked down that matched. It is quieter than when we moved in, it's still annoying. I turned the blower on while my 5 year old was watching cartoons, he asked me "why you do...

Eddie Walker, would you use self leveling compound over this or just tile over it? I think you have done ALOT of remodels and tiling, figured you would know the best way. I have used the self leveling compound once. Its expensive for what you get and kinda a pain, but it did exactly what I...

I took this screenshot of your ad. This is what I see. I'm guessing you chose buyer pays actual cost and it automatically figures the cost to my location registered to my account?

Got the hot water side ready today. Pretty much duplicated what was already there, just 3 feet shorter. I am thinking actually putting concrete over this will be the last thing I do. I will leave it uncovered to monitor my handiwork until I feel confident to seal it up forever.

Forgot picture for when I said "this thinset left behind"

Here's the latest. Capped the drain and vent. Probably going to do the copper 1 side at a time while I'm on 2nd shift and the wife is at work and kids at daycare. I did the concrete saw and jack hammer part while they were away today.

Some in progress pictures. Just a few of the million I took.

Picture of tub that was removed and stain glass that had rotten frame. Also picture of outside of new window, before caulking.

Did the window in new shower this way.

The shower pan in the poorly constructed tile shower we had started leaking. So I tore out the tub and built a really nice and much bigger shower. The old crappy shower was between my wife's closet and the toilet room. Our plans are to extend the toilet room 1 ft and use the remainder to...

It's taken well. I want to do the entire front yard sooner or later. Thinking about laying the squares in a checkerboard pattern and letting it fill in. I have noticed it doesn't "grow in" or spread until the second year. But this variety is very aggressive after it gets going. I do have...

Overload

Supposedly acid core will eat the pipe away after many years. I use oatey #95 tinning solder and their lead free solid core for plumbing. It works well. Any other flux I have used, that solder didn't work. This is the last thing I used it on. Also rebuilt the service coming into the house.

You could have ordered one of these from amazon for $15, removed the plug with it 1 time AND used it for its intended purpose (pictured) at least 6 times by now.

Yall got me thinking bake potatoes in stove.

Top of stove, front of kettle, bottom of kettle.

A gift the inlaws got us that I really like. But the bottom leaves white residue (calcium, minerals?) On top of the stove like it has a couple tiny leaks maybe from a porous casting or inclusion? So my question is, is there a way to seal these couple of tiny leaks without grinding and welding...

Is it like this one? Ours dont seem to get quite hot enough to cook or boil on top unless it's really roaring. Like run you outta the room hot even without fans running. The "jail" like gizmo is to try and keep the kids from melting their face to the stove! Hoping we can quit using it in a...

$15 two day shipping. I wouldn't even drive to HD.

Unrelated picture I guess everyone has their own personal stuck drain plug.

Theres about a million different ways to do it. Fixed more than one car that way. Some guys put a ford solenoid up on the fender. I haven't done that. The poor little solenoid doesn't like living next to the exhaust manifold. On a hot soak (sitting after running a while) things "soak up"...

Standard drawer. Missing some gear wrenches I used and didnt put up.

You use the skinny draws for wrenches, brah. That's alot of tool box space used up, but that's why I bought another tool box!

I got this from my grandpa. Its quiet enough you can watch tv in the next room. I use it for things around the house away from my garage. I guess its quiet because of how slow it runs? Or put the loud one outside in it's own enclosure. Anyone know where I can get another braided cloth air...

These have been less aggravating than previous ones

After absorbing some info I have been ignorant to for almost 20 years (had the same 2" drop ball mount that long). I bought a forged ball mount (17k) and class 4 ball (10k). I have been meaning to pick those up for a while. I had a few odds and ends to return to home depot with no receipt, so...

Double axle trailer has 1 axle with spring brakes

I was wrong this is a international with 2 rear axles it has spring brakes on both rear and just service brakes on front.

First picture is drive axle second and third are steer axle. On a late model freightliner.

The service brakes are all air applied. The spring is only for parking. I have only seen 1 axle per vehicle with the spring brakes (1 on truck, 1 on trailer) The ones with 2 clamps have a spring. The parking release pressure from the dash button is separate from the service apply pressure...

Getting some gray after 11years and all the food the little kids drop is closer to the house.

Its barely a tractor, but their favorite thing to do is ride. Whether it runs or not.

Re: $!#& Chain Hooks No need to climb. After fooling with throwing 3/4 drive sockets and twine or climbing a ladder (28 footer not high enough to get a good pull on a tall tree) I watched an arborist use one of these. I also helped him a little and used it myself. I bought one the next...

I have been getting bids to have trees cleared and land leveled. One contractor wants to bury the rootballs on another part of the property and make use of the displaced dirt. (To save dump fees and buying fill dirt) My understanding is that they will rot over time and fall in, then I would...

They have self dumping garbage bins at work like this one. Idk if that works for you?

Here you go

We have a 2006 as well.

The mower deck adapter came on a trot built lawn mower. I made the bracket to put it on the kubota deck. I use it in the summer to collect zoysia clippings while mowing and leaves in the winter.

Almost to the end. Still have to grout tiles and put up floor and crown molding.

I googled bumper pull camper for 1/2 ton truck - out of curiosity (have 2 and a 5 year old) and find this. Too bad you cant get stuff like this anymore.

I had the same experience. 1 big oak by the house that I wasn't 100% confident I could fell correctly. Called 1 guy with a nice business and nice equipment that I used several times in the past. His son or workers would answer and never follow through on appointments. From what I understand...

I thought this was a crows foot. Huh

I took this picture a while back at harbor freight. I thought it was just as funny as it was scary that this deranged looking fella was buying a machete and was patiently waiting in line with his 20% off coupon. It was pretty funny. I also hope he didn't attack anyone or do anything crazy...

I put some silicone where our granite meets the cabinets to match what the installers did. I rushed home and almost stroked out, then removed the silicone after the wife texted me. My friend searched around and sent me a link to a forum where a lot of people had the same problem. Our...

Sprayer button and wires

Jim do you have costco? 48 beers for $22. Its not good, it's not bad, it's beer, mostly.

I ran mine to the accessory wires located behind/under seat. Put a push button switch on the cup holder to turn it on and off. 16 gallon from Northern tool. The spray is alot harder with the rpms up than at idle.

All but the shower

finally got countertops. Have done every bit of tear out and replacement myself, all the way to studs (and replaced a bunch of those). They did kitchen, 4 bathrooms and made some pieces for the shower im building (corner seat, entry step and window sill) for $4560. With tear out and...

using my harbor freight cart to unload the tool box I bought there. Is that how you know you have a problem?

I'm not a Toyota fan, but that's a real truck.

We are finally re-doing the kitchen with cabinets, floor, countertops, appliances, everything. I wonder about these "quartz" countertops. Everyone says they are better, but they are ground up rocks glued together. Sounds like mineral version of mdf board to me. Granite seems more likely to...

complete with co-pilot

Went to a UT game, wife went there 6 years, I went to UT martin. Can't see it in my picture, but the display said "make your next tractor ORANGE kubota"

I used these mac Mini Long-Reach Diagonal Cutter 5-3/4" Bought a set of these pliers years ago when I was a new mechanic

Bought a 346xp oe Looks like I was the first to run it. Took cat muffler off and put on a hollow one with 1/2" pipe and cut the limiters off the screws. So far have turned them 1/2 or 3/4 turn out.

So to be within the rules, here's my picture it's a couple years old I wanted to ask yall who is the best to talk to about porting my johnnyreb 2252? Never had a saw worked on. I really like this one and more power is better right?

Something dug up the ones I burnt/poisoned. Idk if it was my dog or a racoon. Kinda interesting.

Under the browning bucks rebate I am getting $100 back on the A5 Sweet Sixteen I bought. Figured I would share: https://rebates.browning.com/

I wish our beagle was better in a pack. We want another dog, a walker hound. But this turd hides and mopes around like she's depressed if another dog comes over. She has taken a lot better to our 1 1/2 yo than she did to the 4 yo.

I have three or four chains with plenty of life left, but they are kinda dirty (especially the one I used to cut on stumps I dug up). I sharpened them and tossed the nasty ones in a pie plate full of diesel. I know they don't have to be super clean and I've never cleaned one before. But it...

What Deere4720 said up there ^ Same experience. I made a metal cart to put mine on.

saw him on the way to the hardware store. He was headed there too.

You did probably over pay a little for the "kit" but you got everything you wanted in 1 place without the research, fabrication and down time that I did. (You paid MORE and drank less beer)

one shows a treasure I found about a foot under. I haven't started any of the projects I had planned for this backhoe yet. The digging pictured was a small one I invented to try it out.

Works good, i am real sorry for the delayed response i just noticed this here. I'm not on top of my tractorbynet. I had a little trouble, the brackets they sent would not fit and a couple hoses were wrong. I had Al the tech rep at woods on speed dial (he probably does not like me now). I did...

What is the best best way to test soil pH at home? The little rapitest kit that turns color or the analog meters or the digital meters?

this is it, ladder dok

I hear yah! Always wanted a randall. Saw this in SMKW catalog and figured I would buy it before it's illegal to sell.

At work and got my edc out for a picture. Got 11 others, some case some GEC and 1 Schatt&Morgan. Case copperhead is my favorite.

It looks very similar to my Oregon 22 ton, which I have been happy with.

friend down the street let me get some fallen trees for firewood.

I bought one recently used. Someone had put a harbor freight 6.5 motor on it. I re-did the engine mount, replaced brakes, replaced throttle grip, made clutch guard, removed the govenor, replaced chain, did some jet work, added air filter, made exhaust pipe and made a gas tank from a propane...

Incase anyone was interested, hard to find much about it. I needed more grip.

We have a LOPI stove with single wall pipe going into a square masonry chimney with clay liner. I use a chimguard magnetic thermometer and keep it in the orange. Always burn oak and hickory that's been split sitting under a canvas tarp for 5 or 6 months. Clean everything every other year...

tractor supply wheels and steel from the local yard

here's a picture. I like it pretty good. Time will tell how it holds up.........

Anyone have experience with with either? The folks at gator trax made me a deal, so I bit on a gator trax mx wide rail for my Chevy crew cab.

anyone got one of these? Borrowed a friends Makita that worked well. Now I am thinking of getting this one. Very occasional use. Hate renting. With 20% coupon it's less than $300.

I finally bought a trailer. Texas Bragg 16' no brakes. I like that it's gray instead regular black.

I bought a boom less one from Northern and made a thing to hook it on my 3 point. The boom less works good enough, the other kind would work better. I don't know why my picture rotated when I uploaded it.

Thanks. By bh I meant back hoe

I'm wanting to get a 16' trailer to get lumber, sod, gravel and maybe haul my little bx 1860 with fel and woods bh. I have been looking around and am thinking of getting a big tex 45ss trailer. G.V.W.R. 4,490# Axle (2) 3,500# EZ Lube w/ (1) Elec. Brake G.A.W.R. (Ea. Axle) 3,500# Supension...

Changed it to look a little better

old filter

Here's my copy of your voltmeter on my kubota bx1860. hard to see from the seat, but easy standing next to the tractor. Tied into a wire in the blinker switch by removing the pin from the connector and soldering a wire on, then putting it back in. So I could remove it without leaving skint wires.

can kinda see what was done better this way

I changed both my fuel filters at my 50hr service. Now at 133hrs, the one under the floorboard looks funky. So I copied 4shorts and put a Kubota Grand L filter on in its place. I liked the idea of using a Kubota part than the Racor (even though its a better filter). I like the removable...

I have a pressure washer I got from my neighbor because it was broke. Turns out the pump was ate up from setting with purple cleaner in it. It's a Honda motor with a cheap pump I bought as a replacement. Is there a way to make it idle down like some new ones I have seen? I haven't had a...

Has anyone used this? I am considering it.

does anybody know if this is from the woods equipment company? Or something else?

I'm not trying to plug the company, but I bought a 33' pole saw from ATSS. It works great. It's as good as their website says and better! I cut similar branches on the same tree - one with 28' ladder and chainsaw belting off to tree with climbing harness, one with this pole saw. Using the...

cut all the metal for this with the dry cut saw. I'm happy with it as long as the blade lasts a while. It's so I can put a spray tank on 3 pt

twins!

Here is picture with the clutch off. You can see one place I put rtv on. since the oil pump slides into the pickup i put rtv on one half of the pump and one half of the pickup so it would be sealed when put together and not plug up the oil pump hole. The other place sealed (probably where...

Does anybody have any experience using talstar or the generic bifen it or cypermethrin on vinyl siding? I use those around the house for general pest (bug) control - especially red wasps and they work great. I recently had vinyl put on the back part of my house on the 2nd story. I...

Yuk!

You can get a tester that you draw air/gasses from the radiator into while it's running. The fluid changes colors if combustion gases are present. That's how I have always checked a suspect one. Mine was off the Matco truck. this is just the first pic I found that the tool looked similar...

Anybody heard of the Evolution Rage 2 saw? I bought one online. Reviews were good everywhere. There are a couple u-tube videos on similar products. This one could be had cheaper than the equivalent at northern tools. I was shopping for an abrasive chop saw after borrowing a friends for a...

I have a husky 545 that is fairly new, no been used much. It runs AWESOME, but recently it started leaking a lot of bar oil while sitting. Since it was new I have used Walmart brand bar oil. Anyone know about any common problems? Or is it just gonna be exploratory surgery time when I get a...

Does anyone know the differences between a bh 6000 and a bh 65? I know the bh 65 is the new model, I wonder if it's better or worse. I sent a message to woods, I bet their response will be biased toward the new one! I have also been talking to a dealer with a bh 6000 (old model), I think he...

I bought a echo cs500p about a year ago. I liked the metal consruction, adjustable oiler, and no converter exhaust. But it was a pain in the rear! It had several no-starts. After looking in the carb, i noticed more than once the air filter was letting fine dirt in. It had some goofy 2 piece...

I got these part #'s from Bahrns Equipment for replacement blades- Kubota blade K5181-71940 regular Kubota blade 70000-25040 mulching I have emailed Oregon tech support and they said they didn't make anything for my mower deck. I took one off and measured it- 16 7/16"-16 1/2" long 2" wide...

I have a bx1860 and want to get a landscape rake. I have decided to get a 60" wide one so it will cover my tracks when turned diagonal. I cant decide between a landpride lr05 or a everything attachments extreme compact tractor. Either way I want gauge wheels. They are about the same $. Is...

I am coming up on my 50hr service. I am trying to decide what type of engine oil to use. I like using readily available stuff and was thinking synthetic. I have been told that Kubota branded engine oil has more zinc, and I think my cam is not a roller. So as much as I hate to do it, the...

I saw on the internet where a lady makes her own windshield washer fluid with 1 gallon water, 8oz isopropyl alcohol, and 1oz castille soap. Yall think I could load my tires with a 1 gallon water/8 oz isopropyl solution? That would cost about $0.88 per gallon. I dont need soap or blue color...

Just finished a hitch to connect my 2" ball log splitter and cyclone rake to my 1860. Guess ill have to make a top pin, I didnt know they are a standard length, I made my top link too wide. Used tractor supply paint.

The dealership owner delivered it today full of diesel. Got a chance to cut some grass

Just bought a bx1860 with 48" deck and fel. Have to wait for dealer to get it from out of town. Cant wait!

New member. No tractor yet. Wantin a small kubota. Got a b8200 hst d with loader I cant decide on.