Search results

I don't use the headlights much if ever mostly just the Rear work light. Org. lights and this is the replacement. With both working I have all the Wattage I need. The LED. are bright I'm sure. Yanmar Fredricks # LB-4155

If it's that new to you something must have been missed that showed up. Small crack etc.. Several things it could be. It's under warranty if it is a Refurbished Tractor. I wouldn't be that worried about it! If so and If I recall you just have to get back to them. Not sure that's even true...

Fredrick's is Top Notch! Refurb. Tractor and parts. I actually have been there! Drove from ATL. Ga. for a Yanmar Tiller. Many Yrs. ago though! My church Purchased the Refurbished YM2500. Retired Catholic Priests retirement home. I cut the property with my YM2000 until I no longer could. The...

You have massive air in the Radiator. Pressure build up! The video shows a problem. Does a radiator cap go bad?. Sure it can but when they do It leaks Anti freeze around the top. A dry Residue will appear and you will see it on the top of the Radiator and shroud. A cap Rated 0.5 PSI? Should be...

No Thermostat on a YM2500 Warning light switch # TS-44901 which is like my YM2000. Radiator cap # RC-28 Overflow Tank/Bottle # OFT-4450

You can get pressure tester at any local auto store. Some will loan you it. You just need the correct size cap to check the Radiator pressure. Many sizes of caps are in the test kit. It has a gauge that attaches to them so you can see how high the pressure is on the Gauge. The big Bubble and...

I thought 15 0.5 ? Sure about that. The Yanmar radiator cap pressure is rated at 13 psi1. It is a small size cap used by Yanmar, with a rating of 0.9 kpa2. A earlier thread. Radiator cap on (most?) Yanmars is 13 psi. 7psi also works well. Head Gasket is my guess.

Head gasket! or Hopefully dirty Radiator. Have your Mechanic Pressure Check the radiator and see if it is getting pressured up!. Should be around 15 PSI.

TSC. May be 3 miles. Husqvarna Dealer also. Only a few models In stock but they did Have the chain available for the 55. They changed the drive teeth on the new models and the old style is hard to come across. The Closest Husqvarna dealer stopped selling Husky. and now is a Sthil dealer. TSC...

Have a Echo dealer 2miles from the house and Hm Depot. My Echo shop is way up on my list of favorite. I feel Hm. Depot is The WallyMart world or Hardware stores. I have to be honest a PB500H was purchased from Hm. Depot. Receipt says on this day in 09. INK. 12/05 for a up coming B.day. I put...

Yrs. ago when I purchased the YM2000 in Ga.. Fredricks in Al. was about it. Then Hoye showed up so small mail order parts was easier. I've been to Fredricks after a Tiller which was the last one they had. Local Dealer for the YM2500. Availability was in question then. Tractors even! I know all...

Dealer for service on Warranty repairs. Can't say that as a fact but this is Only a couple miles from me Thanksgiving. 1 Hr. drive from the house. :cool: Outdoor Equipment Store 5889 OLD ALABAMA ROAD, Acworth, GA, United States, Georgia (770) 878-9101 linda_biskup@yanmar.com

No I think it's a Yanmar 336. Many Hrs. on a Fredricks refurbished YM2500 and just the basics on that Tractor! My early YM2000 is actually the same or really close if I recall. The Dia. has all the bells and Whistles on it is why I posted it. Your just after the Work light.

I can't hardly type from injury's or see for that Esp. without the Spectacles on! I was looking at a Org. paper Dia. And then seen my copy on the computer. Here it is! Cell ph. that's not going to happen. My model has super large #'s to make sure I see them and hit the right # for that matter...

My work light is wired to the fuse box. Positive to the Ign. key Switch. Brn. wire 5A . Then ground it to the frame.

With a Power tool I always reduce the Tork to tighten it. Not so much loosening it. If it does slip loosening, Then I will get the wrench or screw driver out to risk damage.

Org. location of the Head light switch. You can see the opening were it was moved to on mine.

Two wires to the R. of the steering wheel. Toggle switch +/-. Was on it when i bought it in 08. Still works AIS.. The headlight switch is on the L. front of the Dash. I've seen it had a rubber factory insert were the Red light switch was moved to from were the work light is now. Red button next...

If the Battery connections on the cables have been replaced I've seen lose/Dirty connections on them countless of times. That shop can test or should test the CCA. or Amps. that you can't with just a V-meter. Amps=Volts. Which I use the highest CCA battery that would fit in the tray. 850 from...

The Hyd. YM2000 pan looked like a Vanilla milk shake. The Bottom was as thick as Crisco in a can. had to scrape it out though the Filter tube.I'm in the high 900 tac. Hrs. so it's due to get changed again. This time I hope that's what it looks like! Pretty sure it will.

I repainted the green Yanmar to an International paint code. Motor runs just fine but I am getting black sludge from the exhaust." New injectors and pump looks clean and fine." That is oil in the exhaust. Broken oil Ring is my guess. Exhaust Manifold shows a problem that Diesel fuel won't cause!

Does the muffler have a lid on it to prevent Rain from getting in it or Smell like Diesel fuel. I would be checking your fluid levels and see if your low on anything. I would get oily carbon bombs on my hood . I pulled the Exhaust and soaked it in gas then blew it all out with the Air...

Brothers Z turn battery disintegrated. The whole Plastic bottom fell off pretty much! It was only a few Yrs. old. The EL. Cheapo factor was apparent! Just happened last Yr. !!

3 bank charger on the Ranger. Trolling motor, live wells etc. Rule of thumb was Keep them charged up! A full charge after use and before I was going to use it. The Deep Dwell Marine battery's get expensive. Only took a Hr. or so to recharge them.

Grand father used a old light and blanket to wrap around the battery to keep the battery warm. Also bring it inside overnight when it was extremely cold. In Ga. it Rarely ever goes below 20 Deg. so they stay in the Tractors. Under a carport. When I shut the Ford down I do pull the + connection...

I found this 63 Ford 2000 on CL. I reconditioned. 4 Cyl. Gas @ 48Hp.. It has a old Internatinal BH. 4Ft' on it. Actually A little wider than 4'. No power steering so the weight offsets the FEL. and helps Tremendously. It sets just inside the rear wheel width so it helps not to get the BH. caught...

The Round Knob below the seat on a ym2000. 539119

Ym2500 refurbished from Fredricks. Purchased it at Spalding Tractor in Ga. Retired Catholic Fathers new Home and Property! It will easily handle any 5' implement. I recommended a Yanmar. I did the Maint. with my YM2000 on the old Hm. So they knew how well it worked! I Physically couldn't do it...

I have a 3 ring binder off all the Yanmar Org. part# and models that used them. Fredricks/Hoye. Also the Ym2000 Diagrams from Hoye which I posted on here before for people that may need to look back at them since there gone. Almost 20Yrs back I had it complied. Pretty much covers all the...

Fredricks calls the Grn. Spruce also and that looks correct for a Refurbished tractor that was from them. The Implement red can came from them. Prev. reply! They have it in Gallons or Spray Can. I'm showing Spruce Grn, Red, White, Gloss Blk and Light gray primer. My YM2000 is Org. paint. I just...

Those part # are from my decades old Yanmar parts book. Not a lot of that model available. Even finding it is questionable. A Pic. Best I can find of it YM2210.

My Parts are showing Steering Sector shaft 2210, 2210B SSS-4310 But I don't show the 2210BD. D=4WD. Fredricks equipment. Is the 4WD shaft different? SCB-1511 Steering Box. 2210 B,D Or BD is not listed so my guess it's the same?

Rear discharge on the FM. that has a Chain Guard protecting anything from getting thrown out the back. The pic. Woods/JD. Frontier 60". The BH. just not any issue if it happens. Blade speed super slow compared to a FM.. 831679 863373 I've used both for a couple decades and never had any problem...

Reason why I have 2 tractors. I FM. with the Yanmar at least 3.5-4 acres Weekly for 8 months of the Yr.. The rest of the 7 acres was clear cut decades ago. Purchased by my mother. The property was a old tree farm! It already started growing up on the back of the property before I built my house...

Tractor Data is showing a Pic. of the TC29 with a BH.. Very nice! It should handle any of my needs. https://www.tractordata.com/farm-tractors/005/0/3/5036-new-holland-tc29da.html

This one should work and Really cheap!! Closer to 1600Lbs. Made for a ATV.. https://www.harborfreight.com/2500-lb-atvutility-winch-with-wire-rope-and-wireless-remote-control-56258.html And it's to big Technically for my Yanmar. I believe it's only 700Lbs. 3Pt. Max lifting weight.

Back to the remedy of a Electric Winch. 5000 Lbs. At HF. 179$ Then only a couple cheap pullies would be needed HF. 8$ stainless steel. If the 3Pt. is rated 1600 Lbs. this is a easy and simple solution. Worst case front end weight added! or load the FEL bucket.

The FEL on my Ford is a basket type filter to catch dirt and Debris. I had a Hose swell at a bend on the inside of it. Done the exact same thing small Squeal and hoses would show movement. I just Serv. it. New fluid. Cleaned the stainer basket and when I started it back up made it worse! It...

If you have a manual for the TC30 Look for the Hyd. Section Filters, screens etc.. How many Operating hrs. are on it. Is it due for Sev. Change? Clean the Fluid, Filters Etc.. Where I would start to check if not known.

Just came up using a boom pole and increase the lifting on a small compact. I've seen a electric winch used. Some tractors you can lock the 3pt. in a raised position and the Elec. winch for lifting. They said it did work really well. Keeping the front wheels on the ground was the biggest problem...

My experience with 2cyl. isn't seals going bad but Fuel lines are a common problem. Fuel filters in the fuel tank also. Almost all my 2cyl. equipment I have changed the Tank Fuel Filter to one I can clean. And what I've found is the rubber Fuel line gets dry and crack/breaks often at the Filter...

Org. from WV. and other states so the cold weather in the N. was always something to deal with. Grandfather in the mountains would put a light bulb under the hood. Covered with a old blanket. My guess as a young kid which he did do it in the winter that grandpa was getting old and just plain 🥴...

Old school Thermal start. Drips Diesel on a Electric coil and burns inside the intake. Sucks in the hot air When you go to start it. Using the Decompression it warms the Cyl. up. I wait for the oil light to go out and release it. I only have to use it rarely in Ga. but it does work well when I...

I bought 2Cyl. by the gallons back then. Elcheapo Wally world even. that was 14 yrs. back using Marine 2 Cycle. Never had the first problem. But yrs. later I clogged up the exhaust. Go figure! Must be todays 2cyl. oil. JS... Had to run to the shed to look at the correct name. It's "Itasca" 2...

That was over a decade ago so oil and gas was Epa different. The 2000 Husky 55 took 24Yrs. before I replaced the muffler. Basicaly just Clogged up! I bought a old 55 for parts to give the shop. Carb. and Muffler etc.. Which I left the rest of the saw with them. I forgot to put the pull start and...

;) I didn't have the sound on. The style and sound of the music does seem to fit with the comments.

I was skeptical. And it did cross my mind looking at what was actually being sharpened. The raker tooth was going to be shortened and lowered more that the cutting tooth actually being sharpened. JMO. I've done it like this with round files and my chains do seem to get normal wear. I'm Sticking...

I stayed away from Stihl. The saws I've seen didn't seem last without problems. The Echo I went light weight and small. No problems with any Hard parts that I can see so far. The plastic was understandable price wise. This showed up and would be nice if it does work. Yeah or Neah?

Used marine 2 cycle for a decade Esp. when I owned the Ranger. Merc. Xr2. my guess it was the 2cyl. injected oiler went bad. The 150 had a broken piston so rebuilt it with a 175 Block bored and fiberglass valves. It hurt some feeling that's for sure thinking it was a 150 we left on the motor...

The L&R brake Turnbuckles are the same as the 276,336 and the YM2000 this is a Brake dia. for the models. The Brake release Spring RS-8311 is the same one used also. Pic on a YM2000. Push on the brake pedal and latch it Or unlatch. Latch the back for both pedals.

My YM2000 same Hyd. pickup screen was in bad shape also. You could tell the Screen had been replaced on it. And was still bent up! Without much doubt looking at the seam and how thick it was compared to the new and Org.. I found out doing Maint.. Old Hyd. fluid was Whale oil basiacly esp. from...

The small Yanmars have a extremely tight a turning radius. A small 4wd. FEL. and a 3pt. Boom pole should handle the lifting. I've seen a small Elec. winch add to do the serious heavy lifting with a 3PT. pole. I have a 2wd. and it has a super tight turning ability and with the 4WD. you also have...

My Ford has a Wagner FEL. which stays on the tractor. Just the plain cool factor and the age of it was one reasons I purchased it. Old as I am!! And the way it's setup the Whole FEL comes off Intact. Literally a couple small handful of bolts. I had a shop do a split on it and replace the clutch...

The Fredricks YM3000 https://automotive-manual.com/wp-content/uploads/2023/07/YM_3000.jpeg

Just put the rear shifter in gear!

I had to shorten a Yanmar Drive shaft that way to long. Mentioned it on a Prev. reply Every bit of at least 6-8" if not more. Fredricks sent the correct one after finding out I had the wrong Drive shaft. My guess it would have worked on that extended setup! Parts back then was hard to come bye...

My Go to saw is a Husqvarna Farm Tough 55. Had it for decades. 1995 era. Old and injury's so I also use a Echo CS-3510 for the smaller limbs and trimming. Almost 1 Yr. old come Jan.. I was surprised how well it works, starts and cuts. It is really easy to use on small debris. The 55 is Old...

The forward could be in stuck in gear. When you shift the rear lever into gear the PTO should turn. At least you may be able to get parts for it. And they refurbished that model so no doubt they know them well. My guess is the 2500 and 3000 use the same PTO parts. Very normal in most cases.

Ym3000 Videos I watched a couple and remembering the setup and it does show 2 shift levers. L. side of the seat 2 PTO shift Levers and the R. side High low range Trans. Shifter lever. I can't remember the gear selection but I seen a Fredricks YM3000 tractor also. The YM2500 I was refering to was...

No rear leveling wheels which I found no need for like I stated a showed previously. But no PTO Dr, shaft showing or hooked up. That maybe a big problem?

This may help and Tractor data Shows YM2500-YM3000. Many hours seat time on the YM2500 And I'm wondering if it actually has 2 PTO. shift levers. 4Spd. Easy to get stuck in between gears or Neutral. I'd check that and if not you can pull out the Whole Pto. Assembly unbolting it from the back and...

What I use on the Yanmar. I believe 4'x6' Which I still use today, Exact thing you stated. Downed tree, limbs etc. used it on a Sears Garden tractor which was my lawn mower and the Yanmar replaced. I'm Using it today to hual wood off the back property. I can get more in it then the FEL..

QA on this JD. which the bucket practically stayed off. Nice option!! Esp. after the grandson took out the pool fence with the bucket mowing with it.:rolleyes: Which I was told to take it off after that and put it acres away in a carport! Another reason one of my tractors has a FEL. and the...

Steep incline on our property State Hwy.. BTDT. for decades and still use a Self-propelled push mower. States Bat wings can't do it all. Center run the tractor on the shoulder is as far Vert. as they will go. Side Bat-Wing lowered to it's max. I gladly cut rest of it for them! Wkly!! To be...

This may help you. The YM240 is basically the same tractor as the YM2000. The start safety switch is Factory on the YM2000B. Which is located on the clutch pedal. The Late model YM2000B has all the Electrical Bells and Whistles. Last production model!. 696617 The Yanmar forum is were to get all...

Top link lets the Tiller sit real close to the rear tires. And when you raise it the Tiller swings out away from the tires and up. It was nice to have that! 597972,597973,597974 The YM2000 was my craftsman garden tractor replacement. Lawn mower now but I used it for tilling the mothers Garden...

Missing the rear wheels and the mounting brackets are cut off. Fredricks is were it came from Yrs. ago!! so they may be able to help you on the model you have Etc... 718833

When I bought the Org.YM2000 I would get Oily Carbon Bombed!! Learned quick not to wipe them off because they would smear! Gas soaked shop rag was about the only way to get them off the Tractor. Thought about turning the exhaust forwards then but after removing the muffler a couple times and...

Org. pointed upwards. Prev. owner changed it. Your 15Hp. can't be very noisy compared to 48Hp.. Super small muffler and Tail pipe. 4Cyl.. Just a straight pipe! kids do that to make the auto exhuast super loud. Been doing that forever!!

165 in the Pic. Factory and a 155 turned forwards.

My YM2000 muffler 24Hp. is much bigger than my Ford 2000 muffler. Heard people turn the Yanmar forwards and then the Exhaust pipe under the Tractor to the rear axel. No Harm that I can recall. My ford is done that way 48HP. it's gas but is really quiet! No exhaust Fumes Esp. from Diesel smoke in...

I have that seat! New seat when I bought it. Spalding put it on my Tractor 2008! A Fredricks supplied Reconditioned YM2500 also. Steve, Cool dude! The YM2000 seat is still in use today. SMDH. when I pulled this up, Use to Puff and Gag. on the Cigs!! see it!...........:rolleyes: 578324

Call Fredricks. Remember this? These tractors are great but finding parts is a challenge.

Org. Grn. and Red That looks the same to the day! YM2000 718869

Purchased this one was From Fredricks. Last one they had at the time. Had to dig it out of a back Parts Warehouse. Gear driven model and not Chain. The chain stretches PITA. from what I've heard often. New Tines I've seen on Fredricks parts but that's about it. And this one had the Rear wheels...

I have done it before. Wasn't much to it. It was on a Tiller I bought used and was giving the wrong PTO shaft! Took a few days until they found and sent the correct one. Last Tiller they had at the time. Shortened it 10+ inches If I recall. I used a elcheapo HF. Stick! I hooked the tiller to...

2wd. and never considered a FEL on it. Plenty of Hp. 24-20@ the PTO.. The 4Wd. front end Axel assembly I think works just fine The 2wd. spindles Esp. takes a beating! They Brake often and you hear it on the Yanmar Forum. Owned mine since 2008. The 63 Ford does have A Wagner FEL. on it. 2wd...

My FM setup and what I bought it for!! 872668

Notorious Yanmar roll over was actually caused from the throttle Linkage loose at the Inj. pump and couldn't shut it off. They put a pin in it! And on my Yanmar they added a Decompression lever also! Holds the Valves open so you can shut it off that way ! It's the metal lever. Lower L. of the...

It's Basically a late model Yanmar which was my guess what it was. Which it is. The first pic. I saw of it was covered and the FS sign on it. The grill guard I guessed but all the bumper weight had me guessing what all that was? Winch Etc.. The square Hood and Grill and older ROP's was the...

Look for and They call it # TCG-4310 or a # PSG-2451 Regulator Gasket. Rectangle 4 bolt cover on the Valve body. On a the corner of it! I'm showing 2 of them so it's one of them. But this so rare and the screen itself and could be the same!

It's true! And were is Yanmar USA. Ga. Guess were I live? You Got it! What I've been hearing ;) The UTDA roller over days are through pretty much!!

If your location is west coast than I can understand. But if East Fredricks who have been around Yrs. before Hoye, I used them since 08. I can actually drive there in a little over a Hr. Only 2 Interstate HWY's Which I'm only a few miles from the first!

Mostly Squirrel's during the Warmer Months here. Winter cold is only for a couple months, and nothing much ever happens then. Already tried nesting etc.. What I found in the Warmer months is the Kitty Cats loves sitting in the seats! And guess what? You got it!!! One's earned his name that for...

I had a FEL. hose swell inside of it. A sharp bend in the routing. Pinch the Hyd flow almost off. After a Hyd. Filter and fluid change made it worse. Pulled it back down and Lucky I looked inside the hose. Suction to the pump. Holy wow!! when I seen it. Wasn't ballooned like that but swelled up!

Rice patty water trashed my Org. cylinder screen, Had to replace it. Looked as though Someone Copper welded a new screen. So it had problems a couple times! The weld was pitiful and the screen showed signs of damage on that one, The Hyd Pan had 1 inch of Crisco thick dirty Hyd. fluid on the...

Has to be screen on the Transmission Valve body also all the 2210,2210D,2210BD are power shift. Info is pitiful on that model.

Pumps work or they don't pretty much. The pump is working so you have a problem with the amount of Hyd. fluid being pumped. Just because you have pressure the problem is not enough fluid. Suction side to the Hyd. pump is my guess. Why I'm saying this is I worked for a swimming pool store and...

Anti freeze in the rears of my 2000 Ford 2WD.. My Yanmar has huge lugs and aren't loaded. I use it for mowing FM.. The rear lugs on my hard clay soil isn't a problem as long as it not wet. Then I will leave tire lug tracks if it is. I noticed that decades ago!. When it's dry the lugs doesn't...

I believe the 2210 should have 2 Filters! A screw on oil filter style and a Screen filter in the Hyd. pan.. I'm wondering also if you may have sheared the pin on the Hyd. pump shaft?

Some tractors which is like this old Yanmar. You can just reverse the wheels. The wheels are offset and doing that you gained several Inches on each side. Big difference and then no extra pressure on the Spindles. Org. setup for a Rice patty field and super narrow displacement and the offset is...

Look inside the lines. Had the same thing pretty much happened on the Fords Wagner. NTM. so I was doing Maint. and changed the Hyd. fluid cleaned the filter etc.. Started it up and it did the same thing. Pulled it back down and checked the screen which is a Basket just before the pump which is...

https://www.homedepot.com/p/Briggs-Stratton-2000-PSI-3-5-GPM-Electric-Pressure-Washer-with-POWERflow-Plus-Technology-020667V/301707824 They still have the model available. I gave 225.00$ new in 2020

Home Depot 3.5 GPM I've owned for Several yrs.. Cheaper easier to operate than gas and seems to have more Power. Made by Briggs & Straton also. Only problem was the Elec. trip protector quit just out of warranty. The trip wouldn't reset so it was a easy find and removed it to a straight wire...

I use one for a tool shed. Just a few feet larger LxW.. Work bench Air compressors,Tool boxes. I have a ramp also to move the small things inside and to work on. ATV. Lawnmowers Etc... then a carport for cover and ease to get to the Cars,Truck,Tractors Etc.. They stay outside. Not much cold...

Drill the old switch out. No much to it! The YM2000 has a metal dash and the old switch is Garbage anyway. Old thread which I do recall. Mine has been replaced on the Yanmar. The light switch is on the front of my Panel. Blk./Red Rectangle. 726435 Rear work light is were it was I believe.

On here I use a printed copy of Parts for all the YM,F,Fx. series. It was from Fredricks. Old school Parts and Org. Yanmar Part #'s. 3Ring binder that barely holds all the copies. There is a couple models that they don't show but that's rare. Had my son who's a computer Tech. Ranked 8th in the...

Used Fredricks Equipment for Yrs.. Yanmar Tractors, Parts, and Attachments. Great service! Even been to the Hartselle location.

2 Veh. Carport. I added a side cover for the tractors like that. Winters are mild in Ga. so I mow 8 months a Yr.. The easy access is nice. The ford tractor is gas. Truck also. Yanmar Diesel has a Super smokey cold Start and was pretty much a deciding factor of a need to enclose it. 20yrs. for...

Elec. so just watch for it to leak. No oil leaks but you know your Trouble light is not working. Dash light/Lights may come on. If it does turn the Ing. switch off and watch for it to go out. But your Alt. won't be charging so leave it running enough to recharge the battery.

Still no part # only if it is vented! Just seen a 1510 model. Seems to be in really nice condition!

It's probably fits a Datsun 110 same one!

Not showing that number just OP-39450. Repl.121252-39450 124160-39450 BUt! This has came up before. https://www.tractorbynet.com/forums/threads/165d-oil-pressure-switch-location.184043/

Interesting! All the big guys are there. :cool: JapanFest Atlanta | Japanese festival in georgia

After looking at the pic and the open threaded hole just below it. That should be a vent tube. Normal esp. in between the lift arms.

the only thing I came up with was the strainer cover 186,1510 IP-4300. Does this look like it might work?

Rice patty water was my guess. The bottom of my Hyd. Oil pan had at least a inch or so of dirty super nasty Hyd. fluid. Thick as Crisco! What it looked like to. Had to replace my Screen or it was best I replaced it.

Worked for decades in Printing and Graphics. Printing press after 35 yrs.. Faulty sensor. Index finder ,Thumb and Wrist. didn't take them off but it was close! lucky that was all. Not really worried about me with the Dearborn but I could imagine all the poor Pochies and kitty's Etc. over the...

Modern Era. Post hole digger. Back in the day I never even wanted to be close to a Dearborn mower Attachment!

My understanding Cold start is Amps. CCA.. You may show fair amount of Volts but the Amps. are low. Voltage + Discharge + Temperature Factor. Basicly when it's really Cold out !!!! Warm outside and low amps it's trash.

My 63 2000 12.4-28 which is what the Owners Man. calls for. The 4000 Rear 13.6-28 Optional lists 2000 13.6-28 4ply 4000 14.9-28 4ply 14.9-28 6Ply 14.9-24 6ply I'm wondering if those rear duals are actually Ford...

My Yanmar has two throttles. A hand That you can set the Idle speed and a typical foot pedal that you can Increase, Decrease the Eng. speed. Release the foot pedal and it lowers back to the Idle setting you have it set at. If your having to use a lot of Eng RPM. to keep it from drifting back...

Yanmar is my FM. 65-75 Tach. Hrs. Yr.. Only owned the Ford a couple mostly with the FEL. and it's been Around 25 Tach. Hrs. a Yr..

Hyd. Section tells you do not operate the tractor with the Hydraulic rate control knob in the fully closed position. I have a feeling we now know what will happen. I would Chk. with Yanmar. Not much doubt they know what the problem is. yanmar yt235 owner manual - Search Videos

My older Yanmar has a Set Pin the sets the Knob to the Shaft. Notorious to get Sheared. Be careful turning it being locked down. You have to look hard for it on mine. Then owners not knowing it's there and it breaks thinking it's a big problem!!

Yanmar built tractors for JD.. I still own and use a 1977 Yanmar model today. Yanmar/Deere YM2500/850 the only difference is the PTO Gearing. No need to Have A 4Spd. PTO. in the US.. YM2000 3Spd. JD240 2Spd. Everything Else is pretty much the same. The hand throttle is about it. Both Yanmar...

You leave the pressure tester Attached and watch how long it takes for the compression to lower. Doesn't lower or leak down is real good. Drops Quick is Real bad! The Ford that was sent to me after I bought it.

Familiar with this model. The fuel governor on a John Deere 5103 tractor is a crucial component that helps regulate the engine’s fuel supply to maintain a consistent speed, especially under varying loads. If you’re experiencing issues with the fuel governor, it might be related to the injection...

No fuel no power and it's not going to run, Low fuel pressure low power. Rule of thumb on a Diesel. It's a over heating water Temp. problem. So how fuel is getting it hot is the big question on this thread?

You can rent a Radiator pressure gage at any local big chain Auto Parts store. If it was mine I would leave it hooked up so you know what the Cooling Sys. doing. Getting Pressured up! Crack, Warped head, Head gasket etc.. Then you can pretty much rule those factors out. My Guess is one of the...

Mowing up hill was never a problem. Org. from the Mtns. WV.. I'm 2wd and in Ga. so never even considered having it. My 63 is 2wd. also with a FEL. so the rear wheels are water/Anti-freeze for the weight and traction. I keep a old International BH. for the counter balance Plus extra R wheel...

Hard for me to recall but isn't your Hyd. pump is on the crank Shaft? If it's lifting then you have pressure. I have the same Control Valve. Pretty simple!. watch and make sure you see Hyd. Valves actually moving with the Handle. In and out with the handle movement. You can see the return lines...

Yanmar USA. being local to me here in Ga.. And rumor has it Yanmar sales are doing extremely well. My guess the TYM., Cub cudet etc. will still have Parts Available but are focusing more on a direct line of Yanmar tractors and now Equipment. The line of ATV. is starting to rank up there with the...

The Old International BH on the Ford in my Prev. reply and Pic. is what I use for counter balance to lighten up the front. Super heavy so much it's easy to do wheel stand on the Yanmar YM2000 with it lifted.

Org. rice patty tractor I bought it from a Fredricks supplied dealer which was a Dealer lot full of Refurbished YM series. Looked as though it rolled off a boat from Japan. New seat was about it then! I left him a Chk. for his asking price until I could get back with a trailer. Seat, Rebuilt...

Owned one for Yrs. and still use it to the day. Hard to beat the reliability factor. YANMAR Tractor Heritage

No power steering back then. But my guess yours is hard if not harder to turn being 4wd. Esp. with a good load in the Bucket. I have to be moving pretty much. I bought it for the cool to me factor! And yes it is. :cool: That tractor will last you for Yrs. is my Guess. 63 ford Old as me! 831446

I had to take my Org. Bridgestone to a tire shop and break the Bead. They even had the Hammer out on them! Late 70's model YM2000. No way after seeing what they had to go through. I could hardly get them to loosen up. I was installing a New Full Tire Nylon Insert were they cracked. Replaced the...

Hay is what the Prev. owner used this for. Thinking about it I need to go weld and fill in the holes the FEL. Hay Forks was attached to it with. After going through everything and in working order there's not much doubt that's all it was used for. Had to split it. Stuck Clutch Etc.. 48Hp. with...

And here it is. Had to share this. https://www.facebook.com/watch?v=990249426201852

Mow way to much for a zero turn also! Brother has a nice model. It does well for a small lot or Subdivision. I'm 24Hp. Yanmar and the 1963 Ford 2000 has a FEL.. 10 acres in all. I like older equipment myself. Easy to work on for me. And paid for.

24 hp. YM2000 Yanmar which is my lawn mower! Frontier 1060 FM.. Rear discharge is the way to Go!! Owned and used it to mow with for 15 Yrs.. 3.5 Acre WKly.. 872668

Almost sounds like I would start from scratch and Replace all the Ing. System. With new parts and rewire it. Big plus when I seen my 2000 On CL. was already converted to 12V.. I can honestly say of all the equipment,toys, etc. I never had A 6V. Electrical system. And seems odd that low voltage...

Yanmar USA. is what I say.

Napa Fuel filter #3262 Fredricks uses the same #. The NAPA gold OIl Filter FIL 1064. Both for under 20.00$ Been using them for Yrs...

The 187 has a fuel bleeder plug. # P-4060 I'm not showing it for the 186 but I'm pretty sure it's the same. It will be just below the fuel shut off Handle. Not showing any additional screens just the normal Fuel Filter setup. Hoye says it's not there on the 186 looking for it And Checked...

Decades of changes for the Org. Yanmar but I'm sure Zen-Noh. https://www.tractorpartsasap.com/what-is-zen-noh?Screen=ZenNoh

The Brake Adj procedeure for the YM is the same. Just the Linkage and Adj. location is different but works the same. Not much doubt these are True factory specs. Yanmar owners is available again! I was surprised of that! I just seen a this and it showed up at the end! New Yanmar sales is doing...

Should work on this Front grill style also. Several different models. With different setups. My2000 Org Nothing. But 2 Bolt holes to screw it to though. https://www.ebay.com/str/southernfarmequipment?_pgn=3&_trksid=p4429486.m3561.l161211 Scroll down. This grill is rare. I've only seen A couple...

https://fredricksequipment.com/product/fusible-link-wh-455/ Common on a few others.

Yanmar roll over special right there! But pulling Fence post out of the ground. No safety features back then on it that's for sure.:cautious:

The Red pedal is your gas pedal Drive it just like a car clutch. BUT You need to be stopped or nearly stopped before shifting Into gears. keeps from Grinding them

I thinking Head problem. Bad Gasket pressuring up the Sys. and getting hot to a bad/burnt, valve/Valves not seating. Hot or cold should be the same I agree on a timing problem. Getting hot is a good sign of a problem.

Heard that before but must not be true! Wondering myself?

Low RPMS when you let the clutch out. Not the Gear it's in.

Hope you can handle low gear? It's a mean one!! Esp R for the older folks as you hear.

Should be a Gas pedal on the R. foot rest. Sits just Below the brake pedals. I set my Hand Throttle lever @ around Rpms 900 and drive it Like a 4 speed Manual car. Tractor needs to be stopped also Esp. When shifting gears. 8-900 Rpms and let the clutch out. Mines really smooth that way. I had...

On the Brake pedals there is a Latch to lock them together. But Our Era. 1700/2000 Never seen one. Just A Elec. Switch on the clutch pedal of the BD. I believe.

Looks correct and real sure the location for import Yanmar. 110 Smithson DrHartselle, AL 35640

Nice location. Not far from Fredricks Equipment which is a big plus. The parts for the YM1700 BD should be well supported by them.

Had to look hard but you can see the Red Yanmar on the Hood side decal. Just before the YM 1700BD. Behind the Loader arm. I have that same Decal for the YM2000 I was able to remove. Intact! Muffler side was in terrible shape. I say 1977. Pretty sure without much doubt your 1979 so that's Org...

Use a Aux. pump and tank. The way my Ford setup and it's simple. Cheap also! I can even Remove, Replace the Whole FEL. in a matter of minutes. And then the Tractor is Back Org. Fully intact. Handful of bolts and the Hyd. pumps Dr, shaft is ran off the Crank pully! Yesterday's Tractor, Stiener...

I just posted the Spec sheet in Yanmar Equipment Forum for the FX42D so it might be helpful

Was able to get this on digital. Old!. found it and was checking if the file was to big for TBN. the way I was able to copy it. Yanmar owners so Old!!! I see it Feb. 2010 BRC...

https://www.amazon.com/Replacement-Tractor-Yanmar-194191-14170-Index-GT988-1592/dp/B0D12QNRSH/ref=sr_1_33?crid=1H8V0FLR51X2H&dib=eyJ2IjoiMSJ9.8QxsFgi3arEEruUP6zT_g_24YqfltpLKLjmyvzRGseT8poMnilrVo9v6Wma3_wyjlf5Dczwp2SmCdZvb2wFq3pXjoFxREBZ-D_K7oBM7NyIWa7Ei8EPKB5vmyAs7rP1IyHxBF-Drow10nUpbyAQIUIqDEgt...

I use a free down load. Search Pic. Resizer. Really easy I have problems also with pics.. 1700BD. interesting for sure. Welcome to TBN... YM1700BD 19Hp. 2Cyl. only in 1979? I knew it was rare but just 1 production Yr... How :cool:

Hyd. pumps usually work or they don't. Dirty filter is a common problem. If the Hyd. fluid is so low that it won't function usually means it has a leak involved to cause it. Most all the pumps have a pin on the Hyd. pumps Dr. shaft that will shear and totally quit. Helps prevent damage to the...

What part of the world are you PearieEh In the US.? I'd use my My Elcheapo HF. stick welder on it and a grinding wheel. They make a small hand held the size of a battery Screw gun now. 100$ I really sux. at it but bet it would be pretty easy to do. I have shortened a PTO. Dr. shaft with the...

The male side of the Axle shaft will be held straight and tight from the Bearing and the Gear. My guess. It looks repairable but personally I wouldn't worry to much about it. The 1500D is only 1433 Lbs... the whole tractor. FEL. pressure on it maybe a problem on that little tractor. No mention?

Repair what! The bad spot now I zoomed in. The inner Bearing collar is going to cover most of if not all of that corrosion. JB. weld it.

Looking for a stub axle? You are? I'm looking at a bearing in really bad condition. Nothing wrong with the Axel? I am looking for the front axle and bearing for a Yanmar 1510D. The 4 bolts came loose and the broke the axle and bearing. If anyone has a front end final drive both the right and...

I'm showing a SM-146 12-V15 tooth. The YM1820 should be a SM-1277 12V-15 tooth. YM1800-1820, YMG2000-YM3810 FX26-42.

Turn the switch on Chk. That you are getting 12V. to the starter solenoid. If you are and you turn the key in the start Pos. and it Does not start. Use a screw driver and jump the + and Neg. poles on back of the solenoid together. My guess it starts? If it does is normal for a bad Starter...

My guess he's just jumping the bad starter solenoid could be just a bad connection?

Ign. pretty simple if Correct in Org. condition. Sounds a little more mousey to me. Original starter connection had been disconneced & a jumper pair connected from the + terminal & solenoid & left loose under the bonnet. Touching the two ends together started her up. .

Looks like the problem. My Org.2000 The Hyd. fluid was super nasty when I first changed it! 1" that was as thick as Crisco in the can on the bottom of the pan. Water Moisture and whale oil............

Turn your key backwards and it puts power to the Thermal start! On the YM2000. The 1820 isn't showing how they done it or what Thermal start setup they used. 606622 It should be pretty much the same. I don't use it and don't have the fuel cup hooked up! Put fuel to it and it works AIS..

My guess. Put the arms on it an Push them down!

Your control setting for the lift and lower is the pin on the side of the Hydraulic valve. The pin is usually in the middle upwards position. You can see it if you look hard. I do have a 240 manual that covers it. The files to big so PM. me if you don't have a Manual and give me a E-mail. I'll...

Not true. He my Use a Aux. pump?

Ghetto Rigged on his Ign. Switched

No Hyd. pressure?

Control valve setup for the 3810. Same Hyd. Valve HV-451. Push the pin in on the valve and the arms lift. Let it out lowers the arms. Pretty Simple so I would check for a plugged up Hydraulic Filter/ Filter Screen Etc. and check to see that it is getting Hyd. fluid to it. 753274

My 2000 setup! The box behind the Solid state is the Org. V. Reg.. I use a Alternator similar. Your Alternator should be a AL-1215 12V-15Amp. I use a AL-1220 that looks the same but is wired different. My guess is the Mystery box is the Org. Regulator. Not a Solid State. I'm showing a Solid...

I maxed my Battery out size wise that would fit in the tractor! I use a elcheapo Wally world 750CCA.. Cold start why! Which the Thermal start I never hardly use but the extra power is there when I needed it. No Dynahomo here.... Only replace the batter once since 2008 and it was a 550 CCA...

The Org. Alt. for a 276 is a Dyno so Tech not a true Alternator. Alternator - AL-1215 - Fredricks Equipment Parts If you still using a Dyno it's only putting out 15 amp.. I look into that and then make a battery size choice.

WS-80 1500, 2500,2610 Wet sleeve with rings 721120-01900 Old # 724160-01900

Wet sleeve WS-75 165 169 is dry Sleeved!!

#RS-400 724066-25501 / 705400-22503 1300 / 155 / 165 #RS-450 721450-22500 1401 / 169 / 180

https://shop.toadmarinesupply.com/ships_store/index.php?p=details&mfc=Yanmar&sku=124060-21600&sectionid= Heard that they kind of normal!

And whale fat grease!!

I have a operator's manual for a YM240 the same As the YM2000. It's in English! Sev. Repair Man for a YM2000. I can't say I have seen that one before? Not saying it's not available or in English. I do have a Repair Man. for a YM169 your welcome to either. PM personal message me And I can E-mail...

Delt with a lot of Pool Spa hotub pumps etc. and a self-priming pump is a centrifugal pump that has the ability to draw liquid from a level underneath its suction port without an exterior priming aid. The name of a self-priming pump represents that it has the capability to prime itself. For this...

They Slow

Mines Org. With Typical repairs. Like your Starter has been rebuilt and has the same Gold coil. I have a 195/240 Operators manual If you want it! PM me or Personal message me and I can Email it to you. Files to big for TBN.

Looks as though the wiring to the dash and switches are different than mine. Esp. At the Radiator drain were you have a fusible panel? One switch looks different Under the Tac. I Don't have that or the Fuel bowl to the Thermal start. Which I never use. Nice Tractor! The TR20A-A only seen a few...

High Maint!

No 4wd. on any of my tractors in Ga.. The Ford has AG. rear also. Anti freeze for weight and they don't bother my yard. My profile pic. is the front yard. Loader on it. Cold weather WV. Mtns. where I'm from Org. I would have it for the Mtn's and snow season no doubt!

This is 5103 Fm. Rear AG 13.6-28 And they work really well also. Turf tires in Ga. are rare. High dollar place 38 acres! :cool: 641958

Oh Nice!! LOL. Told you from the start of this thread my guess it was Super Nasty!! :ROFLMAO:

That is my lawn mower! Fronier 5' FM rear discharge. BA... Since 08

These are Org. Bridgestone that I relined and new tubes. A new Nylon tire insert with new tubes. Covers the Sidewalls also. I'll never wear them out! Done it in 2016. From Gempler Super cheap!! Org front also. The lugs are still huge. Just put a couple tach Hrs on it,;) Chk. with Fredricks as...

When you get the chance to Chk. the brakes chances are you can turn the shoes around. The tail of the pad is what wears so if it hasn't been done basically new pads. Turned mine when I had a axle seal problem I replaced while in both sides. Just Hubs,

I have that model! Great little tractor. 693188

Had to think back but I reversed the Rear brakes Pads on my Yanmar 2000. Which I have 2 Brake Pedals on it also. I did some checking and had to look hard to find it. In my 195/240 manual I Found it with the L/R Brake pedal. It comes up in the Clutch Adj. section so it's setup like that also...

Replaced both my Rear brakes and it is nice to have new Brakes. My new Ford 2 stage is working AIS and I think I'm going to start to use the L/R Brake pedals and see how well it does work for Sharp turns. The New Yanmar has a video of a couple of the models still useing that setup. Just seen...

Md. to now Ga.. Org. WV.. Been here for decades and the heat is rough on me! Esp. this time of the Yr. Today 96deg. High humidity.

I think this yours. For a 3810 Oil pump. Oil pan Pickup tube OP-1423

I figured that but your see how easy it would be compared to the Radiator. That chain must not have much wear to it. With the link/clip no wanting to come out. Good thing again! That pump will slide off that shaft. From out of the Eng. Pulley Coupler or the pump itself. Then the good thing is...