Search results

I never have really understood what the hole in the bottom of the tractor was for. It has a pin in there to keep it open and occasionally fluid / oil drips a bit, but the other day, fluid just started spewing from there. I shut the tractor down but more than a gallon of milky oily fluid was...

I have the rear wheel off to change a tire and found the two screws that hold the hub on missing and the brake shoes and everything inside the hub covered in oil. No wonder the brakes don't work on that side. I assume some seal is leaking. What kind of job is replacing the seal going to be? I...

It ain't pretty, but gets the job done. Kinda like me...

I have a midsize Kubota 4wd that has a front end loader that is useful for everything but cleaning out horse stalls. Can only get a few scoops of dirty bedding and manure in there, and the space is tight so a trailer is a pain. Has anyone come up with a way to make a useful larger bucket? I made...

It uses a relay so three wires. No sure why a relay is needed but followed the directions.

Any ideas on how to mount the switch? It is the vertical rectangular type, so not a simple round hole to drill into the dash. I have it secured with cable ties, and that is ok for now.

Thanks for all the input! I went to the battery for the power. Works great!

If I have to do that now is the time, just will be a long wire from the front battery location to the back then up the support to the front of the canopy. Also looks like I will need a relay and fuse that some of those lights require.

Man you guys are great. It seems I saw a "work light" label on one of the fuse boxes this weekend. I'll go on a hunt for it!!

Good evening! I have the front of the Kobota L3130 off as the battery needed replacement. I would like to put a lightbar (think off road atv) on top of my canopy (top cover) for more light at night as the front end loader obscures the headlights. My question is, do I need to go all the way to...

Long time lurker, first time posting! I have a L 3130 Kubota with front end loader and have been jonesin' for a back hoe attachment. Seems like the consensus here is to avoid a straight three point hitch attachment. I have found a Woods model 7500 for sale that has a frame attachment and PTO...