Search results

Sold my 16ft utility trailer while it was still in good shape. Seems like I had it overloaded every time used it. Local dealer ordered me a PJ 20ft CE. It has 5200lb axles, primer and powder coat, pinstripe delete, winch plate, and rear slide in ramps. So far I am happy with it.

The shower pan in the poorly constructed tile shower we had started leaking. So I tore out the tub and built a really nice and much bigger shower. The old crappy shower was between my wife's closet and the toilet room. Our plans are to extend the toilet room 1 ft and use the remainder to...

A gift the inlaws got us that I really like. But the bottom leaves white residue (calcium, minerals?) On top of the stove like it has a couple tiny leaks maybe from a porous casting or inclusion? So my question is, is there a way to seal these couple of tiny leaks without grinding and welding...

After absorbing some info I have been ignorant to for almost 20 years (had the same 2" drop ball mount that long). I bought a forged ball mount (17k) and class 4 ball (10k). I have been meaning to pick those up for a while. I had a few odds and ends to return to home depot with no receipt, so...

I have been getting bids to have trees cleared and land leveled. One contractor wants to bury the rootballs on another part of the property and make use of the displaced dirt. (To save dump fees and buying fill dirt) My understanding is that they will rot over time and fall in, then I would...

I put some silicone where our granite meets the cabinets to match what the installers did. I rushed home and almost stroked out, then removed the silicone after the wife texted me. My friend searched around and sent me a link to a forum where a lot of people had the same problem. Our...

We are finally re-doing the kitchen with cabinets, floor, countertops, appliances, everything. I wonder about these "quartz" countertops. Everyone says they are better, but they are ground up rocks glued together. Sounds like mineral version of mdf board to me. Granite seems more likely to...

Went to a UT game, wife went there 6 years, I went to UT martin. Can't see it in my picture, but the display said "make your next tractor ORANGE kubota"

Bought a 346xp oe Looks like I was the first to run it. Took cat muffler off and put on a hollow one with 1/2" pipe and cut the limiters off the screws. So far have turned them 1/2 or 3/4 turn out.

Under the browning bucks rebate I am getting $100 back on the A5 Sweet Sixteen I bought. Figured I would share: https://rebates.browning.com/

I have three or four chains with plenty of life left, but they are kinda dirty (especially the one I used to cut on stumps I dug up). I sharpened them and tossed the nasty ones in a pie plate full of diesel. I know they don't have to be super clean and I've never cleaned one before. But it...

What is the best best way to test soil pH at home? The little rapitest kit that turns color or the analog meters or the digital meters?

Incase anyone was interested, hard to find much about it. I needed more grip.

Anyone have experience with with either? The folks at gator trax made me a deal, so I bit on a gator trax mx wide rail for my Chevy crew cab.

I'm wanting to get a 16' trailer to get lumber, sod, gravel and maybe haul my little bx 1860 with fel and woods bh. I have been looking around and am thinking of getting a big tex 45ss trailer. G.V.W.R. 4,490# Axle (2) 3,500# EZ Lube w/ (1) Elec. Brake G.A.W.R. (Ea. Axle) 3,500# Supension...

I changed both my fuel filters at my 50hr service. Now at 133hrs, the one under the floorboard looks funky. So I copied 4shorts and put a Kubota Grand L filter on in its place. I liked the idea of using a Kubota part than the Racor (even though its a better filter). I like the removable...

I have a pressure washer I got from my neighbor because it was broke. Turns out the pump was ate up from setting with purple cleaner in it. It's a Honda motor with a cheap pump I bought as a replacement. Is there a way to make it idle down like some new ones I have seen? I haven't had a...

Has anyone used this? I am considering it.

does anybody know if this is from the woods equipment company? Or something else?

Does anybody have any experience using talstar or the generic bifen it or cypermethrin on vinyl siding? I use those around the house for general pest (bug) control - especially red wasps and they work great. I recently had vinyl put on the back part of my house on the 2nd story. I...

Anybody heard of the Evolution Rage 2 saw? I bought one online. Reviews were good everywhere. There are a couple u-tube videos on similar products. This one could be had cheaper than the equivalent at northern tools. I was shopping for an abrasive chop saw after borrowing a friends for a...

I have a husky 545 that is fairly new, no been used much. It runs AWESOME, but recently it started leaking a lot of bar oil while sitting. Since it was new I have used Walmart brand bar oil. Anyone know about any common problems? Or is it just gonna be exploratory surgery time when I get a...

Does anyone know the differences between a bh 6000 and a bh 65? I know the bh 65 is the new model, I wonder if it's better or worse. I sent a message to woods, I bet their response will be biased toward the new one! I have also been talking to a dealer with a bh 6000 (old model), I think he...

I bought a echo cs500p about a year ago. I liked the metal consruction, adjustable oiler, and no converter exhaust. But it was a pain in the rear! It had several no-starts. After looking in the carb, i noticed more than once the air filter was letting fine dirt in. It had some goofy 2 piece...

I got these part #'s from Bahrns Equipment for replacement blades- Kubota blade K5181-71940 regular Kubota blade 70000-25040 mulching I have emailed Oregon tech support and they said they didn't make anything for my mower deck. I took one off and measured it- 16 7/16"-16 1/2" long 2" wide...

I have a bx1860 and want to get a landscape rake. I have decided to get a 60" wide one so it will cover my tracks when turned diagonal. I cant decide between a landpride lr05 or a everything attachments extreme compact tractor. Either way I want gauge wheels. They are about the same $. Is...

I am coming up on my 50hr service. I am trying to decide what type of engine oil to use. I like using readily available stuff and was thinking synthetic. I have been told that Kubota branded engine oil has more zinc, and I think my cam is not a roller. So as much as I hate to do it, the...

I saw on the internet where a lady makes her own windshield washer fluid with 1 gallon water, 8oz isopropyl alcohol, and 1oz castille soap. Yall think I could load my tires with a 1 gallon water/8 oz isopropyl solution? That would cost about $0.88 per gallon. I dont need soap or blue color...

Just finished a hitch to connect my 2" ball log splitter and cyclone rake to my 1860. Guess ill have to make a top pin, I didnt know they are a standard length, I made my top link too wide. Used tractor supply paint.

Just bought a bx1860 with 48" deck and fel. Have to wait for dealer to get it from out of town. Cant wait!

New member. No tractor yet. Wantin a small kubota. Got a b8200 hst d with loader I cant decide on.