Search results

I have a JD5090E tractor. I'm trying to find the right attachment to dig my post holes. I hand dig most of mine but I'm unable to get some down due to solid rock, TN blue limestone. I know it's probably better to get a rock drill and jack hammer but, due to a back injury, I can't run the jack...

I have a three point 8' bushhog that covers my tracks(I plan to keep it) but I'm ready to upgrade to a batwing. I think I want a 15'. My finances decided it will be used, lol. I have 20 acres at home, 300 next county over(can't clip all of it) and hope to pick up 75-100 in the next year or two...

I pick up my new to me 2019 5090e today. It is an open station 4x4 with loader prep package(no loader but I'll get one). 24 speed with 1100 hours. It is from an individual. It's way more tractor than I need for now but... Any maintenance tips or things to pay extra attention to? Which loader...

I recently purchased a 175 (1972 model per the serial number). It has the perkins diesel and an eight speed transmission. The power steering was leaking when I purchased it( rubber hose is bad, trying to find a shop to repair as the hose is discontinued) and does not work steering to the right...

I'm looing at a 165 Diesel(not sure if it's the 3.3 or 3.5). 6 speed. It has been sitting for a couple of years but started when I went to look at it. It will need tires fairly soon due to dry rot. While looking at it, I noticed the area around the injection pump is wet with fuel. Also, looks...

I'm looking at a 2630. It is a 2 owner tractor. First owner put a short block in in '02 and did clutch, hydro pump, trans pump as preventative. It has 960 hrs since new motor. Second owner did reman injection pump, lift pump, reman injectors. It seems like a lot has had to be done but not sure...

I'm working on my JD skid and the hydro fan motor is seaping oil, causing the fan to throw oil everywhere. JD offers a seal kit for $250ish or a new motor for $1300. Any pointers on hydro motor reseal? Any luck crossing over to other companies for new motors? Daniel

How do I remove the dash from a 8540 with ROPS? I need to lube or replace the shift cable.

I have someone wanted to do some trading. He has a 8540 open station, 3 rear remotes, 4x4, with loader. It is sync-shuttle(I think). It has 3550 hours. I am interested in a tractor of this size, also, I will not put many hours on in a year(maybe 100). He dropped it off at the house today for me...

My Oxygen regulator went bad(dumped tank pressure to torch which ruptured lines) a couple years ago. My local Airgas sent it off to be rebuilt. It did the same thing yesterday(didn't rupture line this time). I don't want to rebuild again as it seems that this rebuild did not hold up. My current...

I am needing a new bar on two of my saws. One will be getting another 20" and the other will be downsizing to 28". I plan on Tsumura bars. I have always used .50 3/8 chains. Is there any benefit to going to .58, especially on the 28"? Anything to change on the sprocket?

I own 20 acres with about 11 of it that is overgrown and kinda rough. I find myself doing a lot more loader work and wanting to do more rough bush hogging. I have a pond to clean out, dirt to move, trees to pile with grapple, and underbrush to cut. So, I've started looking at tracked skids. My...

I finally started on my shop build! :cool2:It's gonna be 60x36 under roof with 48x36 enclosed. Thanks to Rona, I've had more time at home. I got my pad poured in April and it was July :eek:before I could get anyone to come back to pour the apron. I got my welder repaired last week and got my...

I'm in the process of building my shop(slow process by myself). I plan to build my door out of 2x4 1/4" aluminum, so I will be needing a new welder. My old welder is a Snap-On branded Systematics power source with a Miller wire feed. I like this welder a lot but after a scare earlier this year...

Any info or reviews on the 260?

I am a hobbies/farm repair. I have an older Snap-On (rebranded Systematics) power source (100% duty cycle at 300 amps) with a Miller wire feed. It does an awesome job. It is my first welder. I have a project coming up, where I need to weld a bunch of aluminum. I may never do anymore, but having...

I'm finally starting my shop! I've decided on a 36'x48'. I plan to put two doors on the 36' side, a 16' in the center and a 10' or 12' on one end for a lift. I've also thought about a smaller door and/or windows on the back side for a draft. The final picture has a 24' lean to off the back for...

I have a '16 Toro Z-Master 2000 with a 23hp Kawasaki and 98 hours. Went to start it last weekend to start servicing it and the battery went bad mid crank(bad cell). I replaced the battery and was able to do everything accept hydro filters(had the wrong filters, thankfully I looked before...

I have been having issues with standing water under my house. I trenched it to a French drain and got most of the standing water out. All of my insulation and duct work is saturated with water. I had a company come look at it and they recommended trenching, piping, and a pump to remove all the...

I purchased my M7060 with a dealer added second set of remotes on the back. I致e been having issues with the detent not returning to center, I have to physically push it on the back of the tractor. While troubleshooting, I found that the cable is bending where it connects to the control lever...

I have quite a few post holes to dig. My ground is a lot of clay with rocks mixed in. I have tried a 3 point auger and life sucks when it cork screws past a rock and I have to back spin by hand. I thought about getting a skid steer setup and adding third function to my loader. My tractor is a...

I live in middle TN with plenty of blue limestone. I have a small area of rock that I would like to bust in order to make a new entrance for trailers. Also I知 hitting solid rock in my post holes. I know I could rent an air compressor and drill/pavement buster but I知 doing my fencing a little at...

I'm looking at a used LandPride RCR2510 3pt bushhog. The gentleman states that he bought it last year and it is too wide, he travels to different properties. Looking at the pictures it seems to fit his story. I'm supposed to go look at it in person latter this week. He is asking $4500. I feel...

I committed to a M7060HD12 last Thursday. My dealer said that the Kubota dealer site listed everyting except front tires available to ship as of that day. He told me he expected 2-3 weeks for delivery(then a week for him to assemble) and said he would email or call as soon as he had definite...

I'm looking for a 65-75 hp tractor, 4x4, with loader and no cab. I have been to multiple dealers and have read forums until my eyes hurt. I will be using the tractor mainly to bushhog and loader work in my shop, i.e. I like to hobby metal work. I really want to find a 3-4 year old, low hour...