Search results

All. Hired a plumber last night (Sat 830pm) to confirm/fix the issue w my sink not draining. This is also where the AC's primary drain line empties. The commercial grade snake he rented (see pic) essentially stopped wking bc the line was not coiled back in properly or badly kinked. He's going...

Hello to all, I have 2-3 tractors & ATV's that periodically have weak batteries. My brother uses trickle battery chargers. I was seeking your advice on makes & models that work well and aren't trash in x yrs. These are covered sheds, but not climate controlled for temp or humidity, but...

Hello to all, What would cause the rodents to want to go in btw the wires! I have heard of ants being attracted to the area around the contacts bc of the electrical field. Is this the same w rodents? At least it was prob fast...did not impede pump as is. Went to increase the pressure some re...

Hello Guys, We’ve had 12 door break’ins in the last 2 weeks. Kicking in back doors the main MO. Wife is on edge when I’m traveling. Besides the wife getting a .38 snub, I’m going to install these 12” strike plates and sub 3.5” stainless steel screws. In doing so, i have to remove 12” total...

Hello to all, You guys helped me source this part sometime ago. thank you. But, just got this note after placing the order. Anyone know if there's another route to go to get my trailer wiring harness? Information below on what it is, and I need the one that includes the reverse back up...

Hello to all, We have some weeds that are growing up and out of other desirable plants. I heard a technique a long time ago to mix your chemical [41% glyphosate] w water and surfactant. Then put on some dishwashing plastic gloves, dip the gloves into the herbicide, then grab the weed and move...

Hello to all. Have a lot of oak trees w bald moss, Spanish moss & other unwanted epiphytes. I would like dispense Kocide 101 or similar about 30-40 ft up into canopy of trees? I have a 60 PTO tractor. Has anyone built a sprayer that is either PTO driven or separate engine that can spray in a...

All, This is a safety question on whether my daughters car [2018 Jeep Wrangler] is safe to drive back to school.at noon today or not? The drive is 160 miles. The check-engine light came on Saturday morning [2/10/24]. I was able to get the jeep into a shop to run the error codes. These are...

Hello to all, I used to receive email notices on threads that I started or ones that I responded to, as I did for yrs. Now, I do not receive any thread/email alerts, yet I receive the email notice on Tractor-by-Net Trending Posts. Has anyone else figured out how to reinstate the email...

Hello to all, My daughters want to do a garden again. Had a huge garden for 10-15 yrs, then we all become too busy, now they are into organic vegetables. This garden is at our county/weekend place I have a tractor, disc and tiller, but I know it's an uphill battle getting rid of all the weed...

Hello to all, I;ve done some research on this, but thought I would give it a shake w you guys to see if you have the solution. Have a 2002 22" Dutch Vermont wood burning stove...it's awesome. For the last 10 yrs, I get this haze on the bottom, that has now further up and to the center. I...

Hello to all and HNY. It's been awhile since i've been on the forum, but hope everyone is doing well and healthy. It's going to be 20 degrees next week w another 25 & 28 lows...the highs range from 38 to 45. Have a lot of variegated ginger, birds of paradise, variegated fax lily and foxtail...

Hello to all, My brother lives in Chandler AZ, and he contacted me yesterday (Sunday) about 5pm CST. Said he heard what sounded like lightening, but it was clear blue sky except for high cirrus clouds. His back nbor stated they heard it too, and noticed the backside of his roof had damage...

Hello to all, Have a 2014 F-150 XLT w 109,000 miles. I need to get some new ties, but will probably be selling it or trading it in the next 60-120 days. Therefore, I am not going to top of the line but do not want to put junk tires on it either. I drive 75% highway 23% city and 2% at the ranch...

Hello to All, In my F-150, I use a full synthetic 5W30 by Quaker State...it's the second best synthetic w the second lowest NOACK rating just behind Pennzoil's top of line. In my push lawnmower [2011), riding lawnmower [2005] both B&S, and my JD Gator [Kawasaki] I use Pennzoil conventional...

Hello to all, Looking for recommendations on quality border edging. The application is to enclose/border an area that is currently occupied w grass, to first apply a strong herbicide, then 2 layers of a weed barrier, then add rocks the size of ckn eggs. Then on top of the stones, I am going...

Hello to all Looking or a solid recommendation on quality fertilizer spreader for yard use/residential. Can be either single or dual action. Mainly for fertilizers of various types that has a good calibration system for both RIGHT application amount and CORRECT & EVEN distribution of product...

Hello Guys Folks here seem to be both creative and resourceful, so looking for solutions to remove these stains off of our gutters. After installing a new roof, the tar/resin(?) from the composition singles have stained the gutters when the rain overflows. When you get 3”/hr rains, it just...

Just wishing all you guys and your families a Happy and Blessed Easter - Appreciate all the help and feedback over the yrs. Best, tstex

Hello to all Have a Frigidaire Propane Stove/oven, Model FGF326ASD. (And, this is why I’m getting the surge protector). It took a power surge and I replaced the control module bc neither the digital clock nor anything else would light up on LED display. When replaced, all seemed normal. All...

Hello to all, Ive enclosed a drawing of the electrical panels and flow of power. the main 200 amp Siemens panel was just installed. Has a 40amp CB that controls water well & shed. This panel has open slots The 100amp Sq D Homeline panel on house has no slots. This panel also feeds 2 other low...

Hello to all I am having to upgrade my electrical service at ranch. Need a Siemens double pole 125amp cir breaker (Q2125) bc the service panel the POCO is installing is a Siemens panel: SNW0816B1200T I’ve enclosed an Amazon link that has the Q2125 I need. Home Depot has the same Q2125 for...

Since owning and operating ranch for last 30 yrs, the moles have really taken-off around the 2-acre house area. I use cinch traps for gophers and have caught 100's of them and have them under control; the moles I do not. Looking for solutions that one person can implement to start knocking out...

Hello to all and Merry CHRISTmas, My 15 gal and prob 20 yr old porter cable compressor is almost ready for the graveyard. Can you pls tell me what pancake compressor [one's they sell today] are the most reliable and versatile? I have a PC framing nail-gun that I use from time to time, do not...

I'm posting this here bc you guys have never failed me and I [my daughter] has a huge problem.... My daughter and her 3 roommates [all 1 yr just out of college] have rented an older pier & beam home that had an addition w a solid foundation to make it 4 bedrooms. Because the crawl-space to the...

Hello to all, Just wishing all my fellow forum members & your families a blessed Thanksgiving! Here’s a fine Tx sunset from Colorado County Tx !

Hello to all, Looking for advice and experience on how to best prep and then seal a wooden deck. Here is some info: Install date: 2002 Type of wood: grade #1 treated 2 x 6's pine Total surface area: approx 680sqft Location: Under a covered roof w peripheral sun/rain exposure I have sealed...

hello to all, it's hard to believe the reviews online, so I am asking any of you that have owned a power washer for at least 2-4 yrs and like the results, what do you use? Looking for something w 2500-3000psi, for both home and ranch operations. Unfortunately my grew legs and it is gone. I...

Hello to all, My Kubota M5400 has never had a canopy or any other device to protect me from the sun...My ROPS almost hits the top rafters in the shed I park in, so that's the main reason why. However, I have recently seen some pics of umbrella's that can fit below the ROPS. Most of the ones I...

Hello to all, My land renter bought a pretty large 2021 JD w 120-140 HP, and a huge grapple. I have multiple 200-300 yr old live oaks w a solid mass of Yaupons that have grown up from the trees 3-5ft diameter trunks to drip lines. Can a huge grapple w enough HP pull up these yaupons. Some...

Hello to all, This coming weekend my wife and I had promised to go to her moms house to redo some of her landscaping and power wash her entire back yard area. I also had this planned 3 weekends ago but pulled a deep muscle in my upper mid-rt back. There was no way I could lift that much or...

Thank you to all of our veterans & current enlisted service men & woman. Most importantly, a huge thanks to those & their families that made the ultimate sacrifice! God bless them. Remembering you this Memorial Day. Best tstex

I found out why my lights would not come on (pic 1) Are the white connectors reusable? (Pic 2&3) If so, what’s the process of removing old and installing new wires? if not, does anyone have a source? thank you in advance

It’s not a tractor, but it’s more than worth mentioning. I just had a 2020 almost brand new whirlpool fridge ice maker go bad…no more whirlpools ever again. During my rant, l just learned that my 94 yr old uncle has a wedding gift that is still working. It’s a 72 yr old Sears & Roebuck...

Hey Guys, Here’s the link to a thread I started in March on tools/router bits i would need for my first table project. Providing Before Pic & then a progression towards completion. Have to sand one one time, add another coat (4the one) of polyurethane, then add legs. pls let me know if you...

Hello to all, Our freezer door popped open bc I had put a huge brisket in there and placed it diagonally. We went out of town Thurs evening and found the freezer door popped open Sat morning and a trail blood, xxxx and more xxxx that had come out from the thawed things in there. There were...

Hello to all, For the first time ever, my headlights on my 1997 M5400S did not work. Not sure the last time I used my tractor at night, but they would not come on in either hi or low mode. The dash kind of lit up some, but not as strong as what I remembered. The flashing rear lights work...

Hello to all, I was going to have a ranch party w guests, but since it is May 7 the day b4 Mothers Day, now need to have it back in the City. However, everyone still wants smoked meats, Have a 17lb brisket and 10lb pork butt. What do you guys think is the best way to smoke one day, and serve...

Hello to all, Saw a post if you need to grease a tractor/FEL every 10 hrs w low usage. I didn't want to hijack that thread so here we go. I am for sure guilty of not greasing every 10 hrs, esp w a FEL. I did just reload my grease gun yesterday and hit every zerk. Two questions: What is the...

Hello to all, I am in the process of ordering 4 blk powder-coated double 1/2" thick hairpin legs, 14" tall, for a coffee table I am making for our outside area in Hou. The table will match the fireplace mantel. The dimensions of the table are two mirror images of cedar: two 46"L, 10.5" W and...

Are any of these type of clamps worthwhile investing in for holding 3/4” & 1” boards? Thank you very much.

Hello to all, Here's the power wood working tools I currently own: All 120V's 2 tables saws Jigsaw Planer Compound Miter Saw Grinder Oscillating tool Sawzall [semi-wood working tool -:) I have always wanted but never owned a router. However, a dear friend died and he wanted me to have a...

Hello to all, Has anyone ever built a cost-effective high-pressure tree sprayer [40-50ft spray reach] that can be pressured by their PTO? Looking for something that can hold 30-50 gallons, spray a 50 ft canopy w a fungicide to kill bald moss, parasitic epiphytes and spanish moss in live oak...

Have a tandem 20ft trailer that I keep at my farm and is covered. My leasee's heifers ate off the 4 pin connector. Bought a new 4 pin connector [3M1FeMale] and spliced it onto the harness. Have a 2014 F-150 w trailer package. When I went to plug in the 4-pin connector, I first need to plug...

Hello to all, Does anyone have a recommendation on a good portable air tank [5-10gal range]. Desired features American Made from reputable company comes w air hose 3ft+ preferred quick connect hose heavy duty construction/corrosion resistant [at least for 10 yrs] Thanks in-advance, tstex

Hello I’ve tried everything: the medieval trap w spikes, poison worms, etc. We have St Augustin’s & Bahia grasses w a Sandy loam soil. I installed an irrigation system in ranch yard so soil is perfect. It’s 2 acres fenced in on a 100 acre place near Columbus Tx. Plz let me know what’s worked...

Hello to all & HNY ! The original Goodyear (GY) 2WD 7.5 - 16 ribbed tires are close to their end. I have tubes in both of them now. Looking for recommendations on replacing both front tires. Is the quality of 2022 GY still there, or is there a better brand available? Thank you. PS - I’ve...

Hello to all, Have about a 100 acres and use firewood, BBQ smoking wood and other....looking to invest in a log splitter and was seeking advice on any reliable make and models and features that you guys feel are important, as well as anything to avoid? With more bells and whistles, it just...

Hello to all, My last post was about my diesel that leaked when removing the bowl even though the fuel-shut off was closed. It was noted that in-order to prevent water in the fuel from condensation, to keep the tank full. This is where my fuel still came out when shut-off valve closed and...

Hello to all, I started a thread to ask questions about my brothers M4900 [See thread link below]. Out of this thread, to eliminate water in fuel, checking the fuel filer bowl often was a suggestion. Well, I have good and bad news. Turned fuel lever to "off" position, then removed fuel...

Hello to All, My brother has a 2000 M4900 w about 1050 hrs. When he started it 3 days ago, he said there was a loud "breaking noise" and he immediately turned it off. The dealer came out to pick it up and the driver [that works on engines] said "a possible valve spring or injector cap..." He...

Hello to all, Have an M5400S and a during operations, the pin w the chain that is welded to joint stabilizer came off and before I noticed it was gone. I called a dealer and they wanted $27.00 for that pin. Does anyone know of a secondary mkt or another place that is more reasonable? Thank...

Hello to all, Have about 50 acres I want to fertilizer before the expected Tropical Storm Harvey hits [if it does]. Never have had the luxury of know when 1inch, 3 inches, 2 inches and 1.5 inches were all going to fall in the same 4-day period. I would assume that if I put out before the...

Hello to all, Going to help a relative and they need about 12-15 acres shredded. He sold his larger tractor/shredder and now has the BC2370 w a 4ft underneath shredder. Not sure how tall the grass is, but if about 6-10", how long will it take to shred 12-15 acres? I have an M5400S 2 a 9ft...

Hello to all, I believe my ignition switch is toast on my 96-97 M5400S. I'm picking up a Kubota OEM Switch tomorrow morning and was seeking help from you guys that have performed the install? Basically looking for the steps to remove and install the switch, then any specific things I need to...

Hello to All, Have a 95-96 M5400S w front-end-loader and have issues as of today. When I started her up, I turned the key to the left to warm-up the glow plugs as I've being doing for the last 20 yrs. But when I did, she started up. That was the first time that ever happened. I was in a...

Gentlemen, In order to remove the leaking cylinders off my front end loader, I had to park my tractor on level ground that also has a metal roof cover. The ROPS would not allow me to do so, therefore I had to take the ROPS off. Prior to removal, I looked inside my original M5400S OP's Manual...

Hello to All, I am getting the seals changed in my Kubota LA1001 loader cylinders...I did one of the upper cylinders myself, so this time is the other one and the 2 bucket ones. When re-installing the cylinders, how much hydraulic fluid is required, if any, to replace what was lost? The dip...

Hello to All, I saw the JD video on how to change the oil sent out by Tractorbynet. I really didn't learn anything new, but some comments made, I had heard previously too. "Add some oil to the oil-filter before you install it". Well, I always added some oil to the top of the filter to...

Hello to All, Once I replace the hydraulic cylinder for the main lift arms of the frt-end-loader, does the system bleed-out the air in the cylinder automatically since its been drained when fixed, or do I need to do something? Thank you very much, tstex

Hello to All, I have a 1996 M5400S w a front-end loader. I have replaced almost every original hydraulic hose, but today was a first. When I went to lift the frt-end-loader, I saw h-fluid, but none of the hoses were leaking, it was coming out of the end of the left cylinder [from the drivers...

Hello to all, Was changing the oil on my M5400, and noticed those **** dirt/mud daubers had plugged my vent lines. They filled the lines, and other small holes w a white crusty substance. When i cleared the one that is basically under my seat, I heard pressure escape. Does anyone have a...

Hello to all, Just got a quote from a Kubota Dealter on some hydraulic filters for my M5400S and could not beleive what i heard. Does anyone know of an online/reputable place to buy either Kubota parts or Compatible Kubota parts like Hydraulic Filters, Air filters, Oil filters, Fuel Filters...

Hello to all and Merry Christmas. Pls pardon the off-topic ques, but I need a quick answer. I have an electric fence charger and when I take a grounded steel rod and apply to the hot wire to test it, it sparks/arc's the first time well, then is does not on the following repetitive beats...

Gentlemen, I hope everyone and their families are all doing well. Wanted to run this by you guys and determine if any of you have run into something like this? Have a 1996 60HP M5400S Kubota w a frt-end-ldr. The tire specs: Wheelbase: 78.7 inches [199 cm] Weight: 4000 lbs [1814 kg]...

Hello to All, It has been awhile, but I hope everyone and your families are all doing well. I tried firing-up my M5400S this weekend and she would not turn-over. It was the battery. Pulled the battery and viewed I bought it in Aug 2009, so I guess it gave me almost 4 yrs. The last one gave...

Hey Guys, You have always been a good sounding board, and I wanted to see if you could help me with this? My 1995 M5400S diesel tractor, I accidentally introduced the wrong 5gal plastic containter and by the time I noticed, a lot of "dark sediments" were put into a now full tank [20 gals when...

Hello to all, I have owned a M5400S since the Dec 2005 and it has been great. I used to buy my diesel in four plastic 5-gal containers and go to the fuel depot to buy it, then store them in my garage from the elements [garage was not climate controlled]. I changed the fuel filter a couple...

Hello to all, I have owned a M5400S since the Dec 2005 and it has been great. I used to buy my diesel in four plastic 5-gal containers and go to the fuel depot to buy it, then store them in my garage from the elements, but the garage was not climate controlled. I changed the fuel filter a...

Gentlemen, Have never moved/towed my Kubota M5400S [two wheel drive] except for the day it was delivered in Dec 96. Well, I am helping a friend with some grading and other and I wanted to insure we have all the right spec's in moving it. I also have the front-end loader with the larger bucket...

Gentlemen, Wanted to know if there are any special tools needed to pull and replace both the fuel-line and fuel filter for my 029? If you have any "tricks-of-the-trade" or recommendations regarding anything in removing or re-installing these parts, I am ALL EARS. This is the first time I have...

Happy Holiday to all, My 029 starts ok, a little boggy the first 3-5 sec's, but then starts performing normally. Then after 3-5 minutes, it's like it runs out of gas and dies. Cannot restart at all regardless of how many times I try. Filter is pretty clean, s-plug good, gas might not be...

Hello to All, This is my first post in the forum. I have 1997 Kubota M5400S and a credible person wanted to borrow my tractor to put-out a round-bale of hay. They borrowed it around 8:00pm CST this last friday night [dark]. When they returned the tractor around 9:00pm, a hydraulic hose was...