Search results

I'll jump on with the new diesel heater. I have one heating my 20x20 2 floor cabin, and one heating my 12x24 uninsulated shed. They are pretty much amazing and cheap. I went with an Hcalory brand for both spaces over the Vevor, my buddy has the Vevor and the pulse fuel pump is much much louder...

I ride a proper sport touring bike, a 2018 Kwikasfucki Concours 1400. There is nothing like 2.9 second 0-60, 155 mph continent crushing bike with an engine known to deliver 300K miles and more for reliability. It's got the heart of the ZX1400 ninja and the soul of a Goldwing. It's equal neither...

This guy knows the way. I have captured 7 so far this way, in a box trap. You hold a sheet and walk to it, I do not wory much about my feet, I just hold my hands up ad out with the sheet barely touching the ground. You drape the sheet over ad the skunk just angrily jerks around trying to...

While on the page in your phone browser, I assume Chrome, you go to the upper right corner and open the browser menu where you can select DESKTOP SITE. This should show you what you are not seeing in the mobile version.

Thank you very much for this morsel of education. I am going to be doing a 10'X60' deck next year at my camp, and I plan to use my auger for the first time to get the 12" wide by 36" deep holes done. Then I will use a hand post hole digger to get the code required 18" diameter. I will absolutely...

So you think that these guys claiming that they are flying MILES away have people staged with radios every quarter mile to maintain visual? I would believe it, if they are 107 pilots with a crew, but your quotation of the law further strengthens my statement. These people are flying illegally...

So, this is a problem with aerial camera platforms (drones) and uneducated users. And this is why the federal government will continue to apply more and more counter measures to the devices. You are not permitted above 400' above ground level, unless over a structure, then it is 400' above that...

You are an FAA licensed pilot, yet you are spreading misinformation. Let me help you remember your pre-license training a bit, and provide these people with some truth. https://www.faa.gov/newsroom/small-unmanned-aircraft-systems-uas-regulations-part-107 For those of you flying as hobbyists...

Eddie, You will need to study and get you FAA Part 107 pilots license to use the drone for YT video. The FAA does look for drone footage used by non licensed pilots in a for profit way. If your YT account is monetized and has adds, your a prime target for the FAA to come at you with charges and...

I thought I would update what I did, since I kind of forgot about this. My buddy has a lathe, so he turned the lower sump case that I showed in the pics above, then he turned down a bronze sleeve and cemented it in with the oil feed hole still in play. He turned the crank down 0.005", so the...

So, I went last Saturday and ordered an Amish built 24' X 12' shed. I talked to the fellow making the sheds, and he stocks used oil and offered to spray it for me for a price. I declined, as I can do it myself easy enough with a garden sprayer. His opinion is that some of his sheds on the farm...

I have 3 trailers with wood planks for the deck and I have been annually brushing on Olympic transparent sealer stain, but each year it flakes off and needs re-applied. I've seen/read where old timers use used motor oil mixed with diesel or kerosene and brush it on the wood on a hot summer...

When I bought my L3560 tractor, I went and bought a new Sitrex 72" finish mower and a 72 brush hog. My thought was that I would get side work with the finish mower. I used it one time at my father in laws place and never used it again. It's taking space in my 12X30 shed for the last 2 years and...

Kenny Hauk who owned River Raider Off Road / HAUK Off Road did similar. They were quickly up and coming in the Jeep/Bronco world, had some History Channel TV show deals doing custom build shows, and all of the sudden they vanished in the blink of an eye, back in about 2022. They also were doing...

On my L3560HSTC, I will slide sideway off of the hill before lifting a rear tire. I do it a few times a year while mowing one of my slopes... you start to hear the creaking sound of the tires slipping on the smearing grass, and then it goes a couple feet down in the rear. This is with a 72" Iron...

I have a story... I'll preface with... some folks have more money than we can understand. I have a newer buddy who he and his wife bought a local skydivers airport. His wife is some sort of medical equipment salesperson, she makes big money. She had a childhood dream to live in a barn, so as a...

Percentage goes to me winning. This does not assume that I will not come out bloody or injured, but the percent chance I live and it dies. This assumes that it wants me dead and will not stop until one of us is dead. RAT - 99.9% House Cat - 99.9% Goose - 99.9% Medium Dog - 80% Eagle - 17% Large...

For me in Western PA, I buy my red fuel from a place that sells diesel/Home Heating oil out of a single pump. When you go in to the counter, you can state off-road diesel or state home heating oil, and you are written up and charged according to your words. The girl once asked me if I meant...

I also have a Exmark Laser HD commercial zero turn, it is useless on my slopes compared to the Husqvarna. If I had more flat property, the ZT would be the hot ticket, but where I am in south western PA, the ZT is not overly useful. My son has a small lawn service, so he has a few properties that...

Ya'all missed the value king light duty garden tractor. $4600 for a Kawasaki V-Twin, Tuff Torque K-66 with locking diff, fabricated deck that cuts amazingly well, high back seat and is priced far lower than anything else that can match the quality of parts. The downside is that the frame will...

Since your in Pennsylvania... We have Appalachian available to us. They are build per order, no dealer network. You go to the factory and pick them up. I have a couple. Trailer question - skid steer

If you all like USA sourced and manufactured, go look at Iron Craft. It used to be Titan, but with the other import company also being Titan, they gave up and renamed themselves. I hand some Titan USA implements and find them to be perfect for my needs and are now 6 years old and like new aside...

Well... that sure did not age well. 2 months later and his words are worth less than vomit.

So, I watched a couple really informative YT videos of breaking these pumps down, what to look out for and getting them back together and sealed up. There really is not a lot going on in here, they are fairly simple creatures. I think I am going to order the seal kit and tear into the right...

This is a super el-cheap-o JD LA series with a cable operated drive belt tensioner. It is a cable to a coil spring that you rotate a lever on the dash to pull the cable tight and apply the spring pressure to the once limp deck belt. So no electric PTO on the crank, just a solid fixed pully with...

Temperatures settled at 170-175 for left and right pumps and 155-160 for left and right hydraulic wheel motors. Temps rose consistently left to right. So, nothing with the temp gun said that there is an obvious issue. I may look for a local dealer and have them spend an hour or 2 diagnosing it...

The right hand pump is the leak source. I cleaned all and ran it 0.6 hours and the right side is soaked.

Okay. Went and mowed about half of my 3 acres and she showed to a walking speed when going up. It still went at a good pace on the level top. The right wheel is the worst and the one leaking oil pretty bad once heated.

Okay, now I've had daylight and no rain and was able to test drive it. I messed around for maybe 15 minutes and didn't have any slip or power loss, so I decided to un-bury the pumps an all from packed grass. Got that done and see that the right hand pump is leaking, there is oil all around the...

I just picked up a few to good home Exmark Laser HD 23HP Kawasaki with 48" fab deck and has 740 hours on it. It has Hydro Gear 103-1942 hydraulic pumps and there are 2 hydraulic wheel motors. I'm new to screwing with zero turns and hydraulics, but here is what's going on.... from what I see, 700...

Well. That **** show was defeated last weekend. It turns out that the fellow who sold it to me with the bad head gasket forgot to mention that he ignored the leaking gasket to the point of running it dry and destroying the crank and sump as they attempted to trade material back and forth. Now I...

Okay. How does one get a rust ridge off of the crank? It does seem that the crank is trying to hold onto the sump and crack it as we pry, beat and leverage at the sump.

My dudes... how can this toy level engine not allow me to get the dang dump to slide up. I hammered in 3 pry bars from different sides and got about an 1/4" gap and I'm telling you..... she wants to stay right there on that block.

There is something really not wanting to allow the sump to lift up. I mean, I'm getting more aggressive with pretty bars than I think is wise... I'm stopping to see if you all can tell me what I'm not seeing.

I got the thing cheap and want to get it going for a hunting/camp prpoerty that I bought this year. Of course, it had the head gasket, fixed that in within a day or 2 sitting in the shop... the new oil all dumped out. Hopefully I will get the seal and install it and this thing can give me a few...

Should I be heading at the camshaft now at 570 hrs as a preventative? What fails on the camshaft on these, I saw something about plastic... they could not have a plastic camshaft?

The engine model # is a 3318770113B1, SN 071228ZD96064. I think I found the part number 795387 as the correct seal part, if so do I also need to replace the crankcase gasket that I suspect is part # 607110? I was hopeful that I could stand the frame vertical and just remove and replace the...

I bought a clean used 570 hour John Deere LA125 with a bad head gasket for $150 a few weeks back. It had and held oil in it, but she smoked like nothing you have ever seen after around 3-4 minutes. So I ordered the head gasket, valve cover gasket, new oil filter, spark plug, fuel filter, I...

Went yesterday and picked up a new Wood Miser LT-40 Super mill. Just under $40k. The new auto speed set feature really speeds things up, you square your log in manual, set up the final manual cut on the gage/ scale to align evenly with the cut you want, hit speed set and dial in 1-1/8 with the...

For what reason, what would your goal be? Front axles are typically under rated or overloaded as it is with a full load in the bucket, you are required to use 3-point counterweight to reduce the front axle load to a safe level. If you look at the manual, it will specify the amount of 3 point...

By the time your front axle reaches its rotational limit, chances are extremely high that your rear axle and frame assembly have already passed the point of no return. Realize that the machine is already on a side slope of some degree to begin the process of turning over sideways, so now you...

I have the USA Titan 72" rotary and 72" box blade. I dod email the company and they shipped me the new Iron Craft stickers for free to re-label my equipment. I commended them on the name change since the confusion existed.

You bought an Acer PC with the Gateway name. Acer acquired Gateway in 2007. Return it to the store and go buy a Dell or an ASUS. We have an ASUS ROG that is around 8 yrs old that my son still messes around on. Stick towards the gaming end of laptops, they will have better hardware and better...

The Chief 4" stroke air hammer is a good to go tool. I spent 6 hours heating, soaking and beating on a lower strut bolt that was rusted into place (18 years old) with a standard I.R. air hammer. The next morning I ran to HF and got the big boy 4" stroke hammer. I started by trying again with my...

I bought a Grand L3560 TLB about 18 months back. I was at $58K with tax, assembly and 84 months of KTAC. I just did it again in build my Kubota and came up with $66,558.00 pre-tax (6%) and no assembly, no fluid fill, and no KTAC. You would be at around $74K out the door to buy my tractor again...

It is a figure of speech. The point being that I went through 3 units and finally found my huckleberry. The 3560 just checks all of the boxes for my use case and the LA805 loader is a big part of it. Heck, I didn't even even modify the loader relief valve pressure on this thing. She is doing...

I love my L3560. If you found a used one, I would strongly suggest that you go at least look at and touch it. The stability is so much better than my B2650 I had. The B2650 could get tippy on side slopes while my L3560 (both with loaded tires) has been on such a side slope with the brush hog...

I use a pre-emergent crab grass preventer from Rural king about this time of the year. I would not say that it is 100% effective, but it does minimize my yard (3 acres) from being over-run as it has been in the past...

The GoGoNova works just fine, but why it is not my favored of the pair is the larger knobs located on the outside are a potential issue for me mig welding in tight spaces under vehicles where I could hit and move the adjusters. The other one has the more typical small knobs located inside where...

I have a pair of $50 Amazon welding masks and both are worlds better than my 20 year old $300 mask. I give my weld shop mask to visitors in my shop, I use the new cheap ones that fit tighter to the head, have 4 sensors, provide true color and far larger view areas. I honestly love them. These...

At 50 hours on my last 3 tractors, I drain that out and replace with 80/90 gear oil. On a Kubota the manual states that you can use the Super UDT2 or gear oil. I feel that the thicker gear oil is better for the job, and it makes me feel better.

@Mark @ Everlast When would you guys that the Typhoon series will actually start shipping, I'm going down the rabbit hole and considering jumping way into the deep end and get the Typhoon 230 at $2500. That should be all I need for the next 30 years of life... should I survive that long.

What you quoted of mine was almost a year ago in 3-2022, that was the common perception at that time. Fast forward to 2023 under the Bidinflation period with increasing interest rates, the Covid joke is over, inventory is actually stacking up a bit, manufacturer promos are starting to be seen...

By the way, I picked up my buddy who had never owned a welder before to take with me and he bought the new sealed in the box Weldpro for the $900. I walked on it. I'm leaning far more at Everlast. That TIG made me get the heebeejeebees. I got real scared and emotionally locked down and...

We went yesterday up to to West Penn Laco welding supply and test drove that Weldpro. It comes with a 3 year warranty, shipping covered both ways. It ran MIG just fine using the synergistic settings. I ran some 6010 stick on thin plate no issue. I tried to TIG 1/16" aluminum and absolutely...

Was the Everlast Power mts 221sti discontinued? What replaced it? I'm going down the emotional rabbit hole of saying spend more and get AC/DC tig to keep that aluminum option open. Have square wave capability, have up and down slope control, have mig pre/post flow options... but once and cry once.

I ran to my local weld shop this morning, West Penn Laco in Moon Twp. And they had Miller and Weldpro. The fellow there suggested a Weldpro 210LCD for around $900. It is DC only TIG but comes with the TIG and MIG gun and the stinger clamp. Dual gas inputs, no HF TIG and no square wave. Also no...

I do auto-pay using my bank and I have all accounts set to pay 7 days in advance of the actual due date. I never have to worry about last minute, holidays, weekends, forgetting.... it is super easy and convenient. It's almost like I have a secretary taking care of things. I also have my pay...

Mark, Are there any sales or specials coming? I just this morning passed your info to Joe Diciccio from Pa to talk about buying his first welder. Wondering if there are any deals coming and maybe I would want to replace my 20 year old Thermal Arc Fabricator 210 MIG.....

Update, I talked to the state yesterday. We are done. Appears that he stopped recently and looked around, he is closing the case and sending me a letter stating so much. So this coming spring I am going to start the process of getting a permit to go left into the side field another 40-50 feet...

I bought an L3560 last year and the thing is sex on wheels. I love it. I have zero to say bad about it. I did go hog wild, cab, top and tilt, 3rd function, taint tickler.... Almost $60K when said and done. But... I plan it to be a lifetime tool unless I sell it and downsize. I think my tractor...

I am a fan of Krown rustproofing once a year. It is inexpensive, after the first 2 weeks it is not near as nasty and messy as Fluid Film and other thick bodied types. Krown is a Canada based company and if you read forums you will find Canadians who totally swear by it. For $169 a year, you...

I am a NDE Level III (Non Destructive Examiner) (Level III means I am at the highest achievable level in this field) with 29 years experience in the nuclear industry. I currently am the program owner and level III in a USA nuclear power plant. I think I can speak to those welds as good as anyone...

Those are not welds. That is cold mettle somewhat stuck to some other mettle. Don't worry though, it will not be stuck there long. That is about the worst welding I have ever seen that was not an on purpose joke. They are charging you for that!!!??? If an actual trade welder was nearby when they...

Yes, I am on a 0% loan and low relative balance. I am also paid months ahead and do not have to make payments if I do not wish, the way they deal with over payment at Kubota is that you can stop sending payments until you get back on schedule, so you can send 12X the monthly payment 1 time a...

Also, mine was a 3560LE, but the dealer added back the missing items to bring it back to a full L3560 with cruise, lights, mirrors and whatever else was required. Since I bought in the middle of the Covid production mess with little inventory, I took what was on the ground and just had them bump...

I just went to Build My Kubota, to build it again today it is $63,595 list price. It is up around $6000 from a year ago when I bought mine. This list does not have the $1000 top and tilt kit, the online build tool does not allow it with the backhoe picked. But my dealer did order and install it...

The attachments are not working.

Now that right there is funny! A comedian!

The shed is a go. The state essentially told me that if another dump truck pulls into my property, they will bring the Army Corps of Engineers in with Excavators and remove everything I did and bill me a couple million $$. We got shut down in the late spring this year as some idiot called me...

I bought a BX25D initially and swapped it real fast to a new 2018 B2650 TLB and loved it until the rear end ring gear failed (under warranty), so I traded it for a new 2021 L3560 cab TLB. I have 125 hours on it, paid around $56K for it, and the state has come in and killed my project that was...

The place is Byler's Sawmill (Benjamin Byler) located in New Wilmington Pa: Byler's Typical Amish, no phones or way to contact other than drive there and pull into the farm property. Delivery price is $250 for the first 20 miles and $3 per mile after that. I am 46 miles away, so 26 miles X $3...

I just picked up last Saturday a few 5 gallon pails of Super UDT2 at my local Kubota Dealer (M&R Power Equipment, Butler Pa) for $125 a pail.

I know you guys are talking about larger buildings, but I have 7 bay garages that are packed solid and want to get a building for 2 lawn tractors, 3 push mowers, a Kawasaki Mule and some other stuff that is eating 2 bays, I found an Amish place that will build and deliver a 12'x30' "lean to'...

We find that with our choice of food, the Iams green bag of chicken based food, Tractor Supply has the 44LB bags at $59.95 and this is the lowest price per LB that I can find anywhere. With my 2 lab mix dogs, we feed 1 level cup each, morning and evening and the bag gets me around 6 weeks...

I've never ran to any issues, but I do run unusually large TW size tanks, 350 CU/FT. My buddy works at a gas tank filling station and got me the tanks free, I had to pay to have them sent out to be pressure tested and refurbished with new paint and valves. The nice thing is that they last...

Rosebud tip on your torch will put a lot of heat over a larger area. That can be reshaped like it's made of butter, easy with the right tip on the torch. It's tough to cherry up a larger area of thick steel when your trying to use a burning nozzle on a torch. If that is all you have, try and...

So far as I am aware, there is no "aftermarket" hydraulic fluid that matches the requirements for a Kubota that is designed for using the Super UDT2. The $60 TSC fluid would not meet the requirements.

I purchased some solar LED 300W street lights to place along my driveway. What I did not think of was how to get a post to mount them to. I saw some Youtube videos where people tried 4x4 posts and they said that a 16' 4x4 stuck 3' into the ground with concrete swayed like the dickens in wind...

I bought into the Lynnx brand that was prior to Atlas. They no longer sell batteries or anything related. Let's hope your Atlas doesn't get rendered obsolete as well. I'm going to move to all Ego with the 54V Arc Lithium batteries.

I have a 2021 Kubota L3560SE that has 105 hours on it. At almost exactly 50 hours it went into regen, and again at 101 last weekend. I typically run at or very near full throttle, so both regen cycles would have been un-noticed by me if I had not had the display set to show the filter %. There...

From around late November to mid April you can't drive a tractor or UTV on our slope unless the ground freezes. You'll slide 400' down into the trees while peeling the grass from the wet ground beneath. Even at this point your sliding sideways trying to get across, screwing up the grass. I do...

Sitrex, Italian made and very reliable.

That has Hydro Great ZT-2200 hydrostatic drive units. That wouldn't make a single mowing season here pushing my steep yard. Those value ZT units are likely the cats meow for folks living in the flat lands, but I happen to live on a cliff covered with grass [emoji23] and any tractor I buy has to...

A BX mows flat out in low range at 3.5 MPH. A garden tractor with the Hydrogear G730 mows at 8 MPH and a Garden tractor with a Tuff Torq K66 mows at 6.5 MPH according to GPS. I own both. The BX would be a horrible mower in that it is slow, heavy and costly. A Husqvarna 354DX with a Kawasaki...

I've had a Hi-Lift Xtreme 48" since 2014, and I have used it. I also consider it a tool of last resort. It has tried (never successfully) to hurt/maim/kill while being used. They are awesome once you pull of that task, but they are scary as all heck to use... especially after you have witnessed...

That's a better picture of the liberated contraption.

Oh, it was his fault and he knows it. He had a triaxle of dirt dropped and wanted to knock the top off and drive up onto it and push the top of the pile off the backside. As he climbed the front wheels up, the box blade that was fully raised ended up gouging into the ground and he was pretty...

Man. I think we may have under-valued the one we sold 2 years ago! It was a fully operating and functional machine, sold for $7,000 plus $500 to deliver it aver an hour away. I believe it was about a 1984? It had 1,100 hours on the still working meter.

I just left the build my Kubota page, mine is $61,949 now I believe I pad around $57K for it last year.

A big trailer can haul small loads. A small trailer can not haul big loads. My son and his F-150 hauling a young ladies little Ford car. He doesn't have air bags yet, but I've told him to save and get them.... It's a 20+2 Iron Bull 14k equipment trailer.

Yep. I think I'll order that one above and glue it on with the hot metal glue gun.

I found this with the googles. https://www.agrisupply.com/top-link-ball-end-cat-1-shank/p/106051/?utm_source=google&utm_medium=free&utm_campaign=freeshop&eid=gl020116&sid=google&gclid=CjwKCAjw0a-SBhBkEiwApljU0jCWRxGh-qtW6iqNHb7bcO4KQ2-Vi8ArvbWB-NArJhnP6xCVw8zecRoCnIAQAvD_BwE

My father was running the Kubota L3560 today and had the ball end of the hydraulic cylinder decide that it wanted to live free... so it escaped its life of bandage. So, can I buy a universal weld on ball and cage? My father is something else. He can break an agricultural machine designed to...

I just bought my son a 2010 F-150 XLT from lower WV, pretty decent shape, frame looks nice. Slight rust on the bed cross tubes, but the rockers, cab corners and bed sides are great. We are in the process of clay, compound, polish and ceramic enhanced sealant. He's 16, this is the first time he...

If it is a 5 year, it is a ceramic or a nano-glass. It could be the new gryphene coating type, but that is still pretty new and not fully embedded into the detailing world.... yet. If I were a betting man, I would guess Gtechniq C1 Crystal is what he used.

I agree, after owning both a goose and multiple bumper pull trailers, if I had to get into tight places and be the most menuverable with a trailer, I believe that I could jack the bumper pulls into places that the goose would have me throwing fits. It is totally different in technique for...

What about the tie in to the tractor itself. I suppose that this is a Kubota sourced solution only?

He originally bought it brand new as a lawnmower to drag the families big old Woods mower around the pastures no longer being farmed. Some time later he added the loader to it. Just recently, he added a box blade and a rear grader blade for doing work on his property where he is taking fill dirt...

He does not. He has the 2WD tractor (I believe 50 or 60 HP) and the Kubota Loader on it. It is a ROPS tractor as well, no cab.

Like you, I know I have seen folks within the confines of this group that have come up with less expensive yet very workable solutions to this kind of upgrade. I just can not recall how it was sourced. I think there was a company that was mentioned in recent years (by members on here) that could...

My buddy has this near new tractor and is pondering adding a top and tilt to help with box and rear blade work. I know that some of you dudes have come up with more affordable methods of gathering the needed parts and pieces to get this type of job done. Kubota does still have kits that would...

It's not the same at all. There are Tradesmans of today with more safety, convenience and comfort features in them than your 2012. Your trusted steed doesn't have near the tech and safety that the new ones do. Mine has 5 cameras with 360 view, front rear and side sonar, crash mitigation...

According to the manufacturers, they will not go back down. They never again want massive on the ground inventory. They like this lower inventory and more per customer order along with the sales prices at sticker cost. They are saying that we will likely never go back, there is far more money...

Be careful! I almost went to Arkansas to buy my son an F150 and in a whim I asked the guy I was talking to... to take pictures of the frame, springs and rear axle. All rusted. Turns out it's a Pa truck sold to Ohio, auctioned from Ohio and shipped to Arkansas. Same junk as I have up here.

I ordered a 2022 Ram 3500 Limited Longhorn on 7/7/21 and got it delivered mid November 2021. My window sticker was $86,775 back then, I went to the RAM build website and picked out my exact options today.... $90,705. And at midnight tonight Ram is tacking on an additional $1300 to the base price...

What year was it initially purchased? That is the year if you wish to assign a year to it. Tractors tend to be distinguished by model, a given model is made for a chunk of service years, and when the manufacturer updates the model it will be assigned a new model number. Think B2650/LX2610 and...

We got our 1990 Woodmizer LT40 back up and churning out lumber. She can still get it done.

I think that like a previous poster suggested, their physical design as well as senses would be based on the conditions that they lived in while developing. I doubt we would meet the green skin, stubby legs, giant eyes and pasty smooth flesh of childhood stories.

Honestly, The one bar I used to frequent has a female bar tender who truly believes not only in alien or extraterrestrial life forms... but she is convinced to the core that she is one of them. She has alien tattoos all over herself, she talks like a nut case half the time and she is convinced...

The frame looks really nice, the square bed crossmembers have some beginning corrosion, but I'll be taking it to Krown rustproofing as soon as we pick it up and get scheduled. The interior is unbelievable clean. I wish they did back up cameras back in 2010 but unless it's a King Ranch or...

I'm trying with the Chrome browser on my Note 20 Ultra. Tapatalk screws up my photo attaching constantly!

I hate the issues with Tapatalk and uploading pics.

I'm in the process of buying this 2010 F-150 XLT 5.4L with 47k miles for my 16 year old son, $15,995 plus all the ******** for around $16,700 out the door. I think I'm getting a decent truck.

12 foot is crazy small. I wouldn't want that for free. But I guess if your totally cash strapped and can't get anything better... you make sure with what you can get your hands on. I run a 22' Iron Bull and I don't think it's everything I want. A 24 or 26 foot deck would be better when I have a...

I still pretty much live my 2022 Limited Longhorn.... but I'm itching to order a 2023!

Hertel production grade drill bits. Mic drop. Very pricy, but simply amazing to use. They used to make Supertanium bits, not sure if that name is still used, but we used them at the machine shop here at work and they were fan-fricken-tastic. But even the black colored Hertel production grade are...

I can tell you that my new L3560 had excessive particulate in the oil at my 50 hour service I did the oil change and ran the oil past a paint filter. Oil was drained into a perfectly cleaned catch basin. I poured the used oil back into the Kubota oil jug used to fill my machine.i put a latex...

I just grabbed the last 2.5 gallon jug of T6 5W-40 at tractor Supply on Friday for $52.99. It was the first T6 I have seen in months of watching every store I go in. I'm 2 quarts shy of a 6.7L Cummins oil change now, but at least I have something. I can patch in the 2 quarts with something else...

Not sure why you are posting this? It is textbook... I see these multiple times a day. If we all came on here declaring that the scam we saw on FB Market or CL was a scam.... there would be no other content here.

I use a Reese Goosebox on my Grand Design, Lippert only supports the Reese Goosebox for maintaning warranty of frame, no other allows frame warranty to remain active. The Reese Goosebox completely replaces the pin box and has a goose neck riding on an airbag with twin shocks, this isolates...

What about a Kubota L4060 or L6060?

Seen at a gas station yesterday. At least the safety chains are attached....

You have to remember that not everyone gets the same paycheck. There are people who could buy and sell my life. There are people I can buy and sell. That is the cool thing about America, we all stand a chance of grabbing a bigger chunk of the pie. And please do not misconstrue that as thinking...

I got my 2022 in just under 4 months, but there are MANY on the HDRAM forum that ordered before me and are still waiting 7 months later. For some reason I was lucky! I was twice lucky because I bought a 2021 in mid summer 2021 for $72,900 after all was said and done, the dealer gave me $72,000...

I can pull a 72" finish mower up my shallow sloped yard with a 3560. It does need the low side of mid range, and you want to get out of the auto hi/low shifting mode otherwise you do get a weird lag between the auto shifts that kills your motion. I use the auto shift mode for normal loader work...

Let's try another....

Maybe it will work....

Getting pictures to load by Tapatalk is always a battle....

Yes sir. Due to the fact that the owner, my best friend, is the owner of Timberwolf Logs Tree Service, and we live in the Pittsburgh Pa area where we get only late December to mid February of hard core winter where he can't work and we can spend time "playing" on these projects.... we can't...

Pictures don't always load correctly on Tapatalk...

Okay... it's been a fight to get this 32 year old LT 40 running, but today was the day. We made 7 4x6x12' posts, 16 1x13 planks and 8 1x11 planks. It was around 13 degrees out, so we called it a day.

Watching the Matrix with Red.

Picture of it attached to the hydraulic control shaft.

Back at it on the old Woodmizer LT40. I need to replace these contact switch springs on the electric hydraulic valves. I do not know what to call them, and I'm failing to find them on Google with my use of the incorrect vernacular. Can anyone help me learn the proper name or point me to a source?

I'm wondering if the trailer brake system is non functioning and that led to his crash. I understand the truck is grossly under sized, but I also know that with my 14k equipment trailer, dump trailer and 7k utility trailer...I can skid the tires with a load on. My truck doesn't barely need...

Here it is, the unicorn everyone asks about.... Where the driver gets charges based on an overloaded truck. https://www.nevadaappeal.com/news/2021/nov/23/truck-was-towing-double-max-weight-carson-city-cra/

Chances are, if you need to drag with another machine to get it to fire.... the engine is plum worn out. Compression is to low, it can't squeeze and fire off the fuel at the rotational speed supplied by the starter. You drag it fast enough, it fires. It warms up and tightens up a bit, it can...

Translated: Exactly it is equal to that machine.. I'm looking for the manual to fix it... but on the internet it is not found for this model.. I read that Arto managed to get it to two of the forum who had the same problem

It is not what I thought it was. It is some form of subcompact class of build but appears built backwards with the larger tires in the front and what looks like an out front mounted belly mower more similar to a zero turn. Kubota F3560 Outfront Mower Auction (0015-8012856) | Grays Australia

Never mind... Gooogle is awesome! I asked to translate Italian to English... "Good evening everyone I am new to the forum. I am a gardener who owns several work machines including a Kubota f3560, I have lost the manual and I would like help from someone if you can help me find it. I have tried...

Can anyone translate this? I am assuming that he is asking about an equiv to the USA model L3560?

I wonder if the back of the large bevel gear has a casting defect that is allowing the back side to rub that path into the cast housing? Could also be that the large bevel gear was machined incorrectly and it is setting back a few mills deeper than design drawings would suggest.

Just use a shock bushing and cut it if you need to. Any parts store should be able to source one. Tell them you need upper shuck bushings for a 2014 Wrangler if they need a make/model/year. Go to Amazon and type in "front shock bushing" and you'll see lots of options that can easily be cut...

The tow vehicle can't recharge or recover the battery back to full during a long day of multiple lifts. But you do replace some of what was consumed. Think like this... you use 10% of the battery for a heavy lift, drive back to get filled and drive back to dump site and in that time you...

It's linked to your name, phone number and email. No invoice needed.

My dealer has UTV machines ordered from this fall with a spring of..... 2023!! Expected delivery. 2023. That's not a typo.

Now that is funny! I will for sure take a look. I do not allow food or drink other than bottled water in my vehicles.... I hope that the dudes building it are not the first to be caught breaking one of my cardinal rules!

And the dealer has a large portion of the items, really it is the BH92 (backhoe) subframe mounting kit that is non existent. I asked about taking it in the get all but the backhoe done and they do not want to take scheduled shop time 2 different times to do part of the job now and schedule in...

You know, you have a situation that I may be able to show an alternative to. Your older, less capable, alone and have your beloved property/home. My wife and I moved back into my parents home years ago when my mother started with cancer and mental issues. We live in a very large 6 bedroom home...

I am doing this as we speak. I bought a Kubota L3560HSTC-LE with the LA805 loader and with around $20K in options. I took the tractor in mid September, and I will wait for..... -BH92 and all required subframe and hydraulic kit parts -Thumb for BH92 -Top and Tilt -Defrost glass kit -Loaded tires...

Skid steer quick attach

How many hours are on the 10 year old machine? Is got to have more hours than average I would guess. Are you a religious greaser? I'm sure that keeping them wet with fresh grease every 10 or 20 hours goes a long way in pushing grits out and preventing wear. I try to grease often, but we all...

Could be, but I highly doubt it. Typically you'll ream and bush down to pin size or weld in new bosses. If the pins are getting worn they will absolutely increase the rate of wear and deformation of the bosses. You do want to get things tightened up again as much as possible.

Are the pins visibly worn when you pull one? Often times the pin is spec'ed by engineers to be the softer material, so if you religiously grease the pin joints the welded in pin boss will be harder and significantly less worn. I would hope that this is a 100% followed rule of thumb, but it may...

Oh, this is exactly the ones that I have for my dogs, $12.99. I bought and have been using them since 2/22/2019. These charge with any standard USB micro cord like all of your older cell phones took. I never let them go dead, I'll plug them in every few weeks and charge them...

I live on a rural road and my dogs do run free often. We let them out and they do their thing until they want in. They do noit go on the road as a general statement, but I'm not going to lie and say that I know they do not ever go on the road. One thing I do is put a strobing LED collar on both...

If in low range and at operating RPM with everything functioning normally, something is wrong. It should easily spin the tires.

The Kubota Grand L L3560 has HST+ (freaking awesome) and left foot split brakes. I have had mine for a few weeks and 30 hours of use and it is a really strong machine with a magical HST system.

I can tell you this. My 7k gross utility that weighs 2k has a payload of 6k with 1k tongue weight. That's per the manufacture, Quality Trailers in Ohio. Similar, my Grand Design 311BHS with 14K gross fifth wheel has a pair of 6k axles under it and accounts for 3k pin weight on the truck...

I hardly think it's lit up while driving around. It's a mode that you'll go into for loading that activatesthe taillight indicators as well as the dashboard display. When you drive around the taillights will act like any other taillights.

Gooseneck has placement for 20%-25% of the trailer load to be placed on the tow vehicle. Bumper pulls typically are designed to have 10%-12% of the trailer load weight to be placed on the tow vehicle. That gives a Gooseneck a nice advantage in payload, a 4500 lb bare and 14k goose that moves...

I agree, I would never buy a 20' trailer. Too short for tractors unless it's a BX. My 22' has me hanging off the rear with my brush hog on my Grand L with loader. I wish mine was 26'. I've never said... "I just can't haul that, my trailer is just too long and has just too high off load rating. "

Your missing something if critical importance here. 8200 lb machine and let's assume a 4000 lb trailer is 12200 lbs. But a goose will be designed to place approximately 20% of that 12,000 onto the truck rear axle, or 2400 lbs. That 2400 leaves the trailer, so your trailer and tractor are...

He was removing lugs on the wheel of an international straight frame truck when it grenaded on him. No injury. He's going to buy an IR 621 to replace it, that 3/4" Earthquake was just over 3 months old.

My daughter's boyfriend works on medium duty diesel trucks for a living. His 3/4" drive HF Earthquake impact blew apart while using it today. Place a mark down in the suck category.

I'm calling BS.... not because your BSing but because there are 2 Titan companies and many are unaware. There is Titan Implements who are in Tennessee I believe. Products cut, bent, welded and assembled in USA. Titan's headquarters and manufacturing facility is located in Decatur, Tennessee...

Here you can see the single and the smooth top heavy Guage steel.

Single tail wheel (what I just bought) vs a dual rear tail wheels.

Dont forget the USA made Titan Implements. The heavy duty smooth top 300 series, model 305 is a 100HPO box, 10G steel, 1/2" stump jumper and is a heavy built and thick walled machine. I like mine a lot, but mine is a 72". https://www.titanimplement.com/300-series-cutter

Nice to meet you, I'm up near Cranberry Twp.

LOL... I just traded in my 2018 B2650HST ROPS with a little over 600 hours, Loaded L33SU R4 tires, spacers, tractor, loader and BH77 Backhoe with manual thumb. It lived inside a garage every day of it's life. I traded it 2 weeks back for $16,500 to M&R in Butler Pa. So I would guess that they...

Yesterday I swapped the rear glass for the defrost glass, there was no switch or wiring pigtail included in the boxes with the glass. I'll have to call, they assumed that everything needed would be in the bosses with the glass. Then I used a 20 ton bottle jack and jacked it up slightly...

I already ordered the 3 factory defrost windows, and of the $20k in add-ons that I ordered during the purchase... the 3 pieces of glass are all that came in. So I ran to the dealer Saturday morning and grabbed the 2 quarter glass pieces so that I can install the left one in place of my open hole...

The B2650 right side final drive bearing failed as the root cause.

This is the gear set that failed in the B2650. Right side final drive.

Some brush hogging and log moving.

Doing some finish mowing.

Quarter window gone...

Well, 3 days in since picking it up. I moved a bunch of material, finish mowed a few acres, brush hog around 6 acres and blew the left rear quarter glass out of the cab on a tree. Good Times.... good times....

That there looks like the problem is solved..... He can find one on the ground, road trip to grab it and be smiling and happy with a machine that meets his needs and expectations. Boom! Money!

The pups even help with material handling.

I just negotiated my deal on the L3560HSTC-LE T/L/B with a pretty substantial list of add-ons at $53,900 - $1100 in Kubota rebates + $5900 in KTAK with the 0% @ 84 months. That was straight MSRP as shown in the build my Kubota tool, minus the incentives. But hey, they actually had 1 unit on the...

@RickB 5030 did. But from what I am understanding the antenna and speakers are fully wired, the female radio plug is setting behind the blank plate. So all I should need to do is solder that 9 pin male plug to the radio wires and plug it in. Now... should I be wrong.... Things get a bit more...

Solved thanks to the pictures in the link from @workinonit The OEM has a female plug in the overhead, this is the male counterpart that simply plugs/clicks into the OEM harness: https://www.amazon.com/dp/B091YRJN9M?psc=1&smid=A1P7CL4DSE120L&ref_=chk_typ_imgToDp And I found a dirt cheap $33...

That is what I was hoping for, a plug and play type of thing. I need to pull the blank and take a gander... is it a plug like a car has back there, or is it just a bundle of blunt cut wires? If a plug, I would prefer to find the mating plug that has a pigtail that I can solder to and not...

Yes, it has speakers in the roof, the knock out plate over the stereo hole, the antenna is installed and wired, and from what I gather the wires for the radio/speakers all setting behind that knock out plate. So it sounds like I just need to hit Crutchfield and pick a head unit.

I just picked up my L3560 Grand L cab unit yesterday and it has the speakers and the blank cover over the hole for the stereo. I would like to add a Pioneer head unit to it, and the question is what do I need to buy besides just the head unit? I assume that I need a wire harness kit to tie into...

Because it's likely to fail again. I'm not the first to see this exact failure in the B26 rear axle.... and I'm not going to stop doing what I do here for at least another couple years. And the cab is really nice!

I got it home this evening and started removing the paint from the loader within moments.

I lied.... well made an error. It's only $53k plus the obligatory $5800 KTAC for a total outlay of $59k. But.... this should last the rest of mine and my boys lives.... right?

I still have the 2018 Mule Pro DX. It's a very good machine within its designed use envelope.... it's just not at all a fun or sporty machine with the diesel. It's odd because it actually has great suspension and if going down hill and you hit a bump and catch air, it eats it up like nothing...

The right side axle bearing failed allowing the pinion to ring gear mesh to change and wipe a couple teeth from the ring/bull gear on the 2018 B2650. So while the dealer has it under warranty getting a newcomplete set of right side parts loaded, I decided to take trade value (always leans...

Sleeping on the couch....

My puppies are always around. Sleeping on the couch, helping me sell implements... always around.

I'll be seeing my buddy this evening... but like my wife said, it's not worth getting upset and burning a friend over this. By the way.... I just left the Kubota dealer, I ordered a L3560 HST+ open station with rear spacers and loaded R4 tires.

Well.... as it seems.... he was drunk talking and we shook on the deal and now he's backing out. I kept trying to text him Monday while at work saying that I wanted to come after work with cash and the equipment trailer. He kept saying he's really busy and would be working late and couldn't meet...

I'm assuming another grand for battery, filters and fluids. Maybe belts and hoses.

He's the original owner, and 450-ish original hours.