Search results

I'm looking at a tar river spreader. Seems dangerous to me to have the actuator so close to a spinning shaft. Other spreaders seems to have double the clearance or more. Am I missing something?

I'm in a suburban lot, with a 12x12 shed. I have enough attachments that I keep a cheap 12x12 storage unit with seasonal attachments, and make the swap twice a year. I got my system down, uhaul 6x12 with a ramps, everything is on skates. The only issue is my front mounted snowblower. It's a...

I’ve been trying to sell my 48 inch rotary cutter in suburban NJ. It’s been on Craigslist and Marketplace for 6 months, not even a bite It was too large for my x730 (shocker) Any ideas? My dealer won’t take it. Thanks all.

I'm planning on putting a buffalo turbine on my 1300 pound 2wd tractor. I have enough horsepower, and the implement weight is ok. Is this a good idea? Anything I should be aware of?

I have a bunch of old growth trees that drop hundreds of sticks every wind Storm. I've been picking them up manually with the kids. It's a 4 hour job. I need a better solution, but can't figure the right tool. I'm thinking: Take a used walk behind leaf blower and build an adapter for my...

So I bought a front broom, unfortunately it is bent pretty bad, see attached. What's the best way to Bend it back? Can't use heat, too many pivoting bushings. I was thinking a jack, but I can't figure it out Any thoughts how to bend it back?

I buy all my equipment used, probably north of 12 pieces. And this time I think I made a mistake. I grabbed a Deere 52 inch broom model year 2021, with a 1023 quick hitch and drive shaft for $2,000. It was used in a fleet in north Jersey for snow removal. Not a alot of rust, and the bristles...

Let me preface this that I searched for 15 mins before posting this... I have a new PTO generator. When I brought it home, I went to take the PTO apart to cut it, but when I fully extend the shaft, it stops abruptly. I can't take is apart. There is nothing in the shaft manual about this, can...

I need a reccomendation on a grass seed I live in Northern NJ, the soil is in a wetland in the spring, but wet all year. Full sun. The existing grass is so stringy, it gets caught up even with sharp blades. And grass seed reccomdation that can be cut by a flail, but looks nice.

I am buying a new truck. Here are my constraints: I am between a Toyota Tacoma or a Lexus GX. I tow a 5,000 lb boat, 5,000lb dump trailer (single axle), and misc dual axle uhaul trailers, about 4000 lbs I am concerned about the squat on the Lexus GX, can someone give me their thoughts...

I had a rear pto installed by a dealer for my x730 They didn't properly vent the PTO assembly, so the oil wasn't properly circulated. Watch this video. I dodged a real bullet, once I vented, my hydro oil went down well past the danger zone.

I have a soggy lot. Ruts are pretty easy to get. I was curious if anyone airs down their turf tires on subcompact sized machines when it t gets soggy while using a mid mount mower. How low do you go? My rears are 26x12x12

I have a new to me Deere x730 (2wd, 1000 lbs), with a front 47 snowblower. I used it in about 5 inches if snow this weekend. It was ok on the flat, but my slight incline (3 ft rise over 15 ft) it was a mess. I need three options (but are open to others): 1. Weight (I have no three point, and...

I have a tractor project, and I need a high quality toggle switch for my dash. But the switch needs to fit into a 17 mm hole in the dash, and fit a wiring harness that can accept spades that are 9 mm apart. I've looked for an hour and can't find anything. Thanks in Advance!

I am shocked that I can't find this answer on the internet. I have an x730, of course 2WD. Can I keep the 2000 RPM drive shaft for the snowblower on all winter? Other than clearance issues, I can't think of any reason why i wouldn't keep it on. Am i missing anything?

Hi, I just bought a x730, and I want a 52 Broom. I am in NJ, and reach out to dealers in NJ, NY, and NH, and I am being quoted MSRP and over MSRP. In this environment, are the brooms in high demand (other than its snow season)? Should I be expecting an 8 percent discount? Or am I out of touch?

I’ve had my BCS 770 for about 18 months now. Today I needed to move a rented log splitter throughout my property. I mounted a drawbar on my first Generation eartthtools power barrow, and it worked awesome. The transmission didn’t whine at all towing the 700 plus pound splitter though wet grass...

Does anyone else's power cradle leak oil. Mine was overfilled by my dealer, I ran it for about 5 hours, until I realized it was overfilled.

I am curious how long a 48 in commerical walk behind mower rear tires will last. I have a similar sized machine, that makes similar turns. I would like to foam the tires, but I would like the Carisles to last a while.

Can I order an x350 with a deck delete and buy a 54 inch deck separately? Would it work?

I need a good way to secure a Deere x350 in the back of a 2021 Ranger with the short bed. the tie down are in front of the wheels by alot. Any ideas or photos? Also, storing the ramps themselves are hard. Thanks!

I found these interesting items on craigslist. A PTO spreader, and a sprayer. Prices seeem good. In PA...

I have a 2018 Honda Accord with the 1.5L Turbo just at 25,000 mi. I just got back an oil test, fuel dilution is at 4.4 percent. I changed the oil (mobile 1) at about 80 percent of the oil life, or about 5,000 miles. I just put the Amsoil XL in it, and bought Amsoil Signature for the next...

I need a second machine to complement my BCS 770, and I'm interested in a PT180. Going through this forum its impressive how many hours you guys run on these machines. I am looking to run the machine about 30 hours per year. I have an acre of grass, and many wooded acres. I am looking to...

On Saturday I put an order in for a F250 CC 4x4 XL, I customized it for my specific needs. The dealers in NJ where quoting lead times of 12 plus weeks. The Virginia dealer was quoting 4 weeks, and they beat the price by $1,800. Does anyone know actual lead times of these trucks in the current...

I have a small PTO powered pressure washer. I want to use it in winter, but my garage gets close the freezing often. I thought about having a 100 watt bulb in a small insulated wooden box. But I am not sure that would work. Any other ideas.

I am interested in using my pressure washer this winter. I usually winterize it. Here in NJ my attached garage gets in the mid 30s often. Has anyone built something to keep their pressure washer heated, instead of heating the entire garage?

I have a machine with a Tuff Torq KHS drive, specifically this one. KHS-13 - Tuff Torq Corporation I plan on using the machine for 48 hours strait, but I am concerned that the unit isn't built for that duty cycle. Anyone know what these drives are used for? Tuff Torq says these are light...

this guy does an amazing job with every test he does. This time the was testing several chainsaw chains. not surprising the chinese brands did do well. Which Chainsaw Chain Brand is Best? Let's find out! Stihl vs Oregon, Husqvarna, Carlton, Forester - YouTube

I am in the process of selling my two year old honda tracked snowblower, and already got a tractor snowblower and snowplow. I have a 200 ft driveway. I came across a sweeper for a song... $400, and bought it. But now I have three attachments for snow, and I only live in northern New Jersey...

I have a general brand one man auger. I bought it used from a home depot rental location. I would like to use it for ice fishing this year, but my auger shaft outer diameter is 1 inch, and the ice auger inter diameter is 3/4". i cant seem to find and adapters online, and recommendations?

Hi, I saw a new Stihl MS 241, at a Runnings in Hinsdale, NH. SInce they were discontinued years ago, they are hard to come by. Hope this helps someone.

I have a rough pasture, with alot of grasses (3 ft high) hardwood brush (1/8 " thick max 2 ft high) I also have a finished lawn. Would a BCS 38 inch mower (without the bagger) be able to take this on?

I have a PTO chipper that's too big for my storage. Any issues leaving a PTO chipper outside? Anything I should be aware of. I really don't have any options.

i have a honda gx 390 electric start engine, and would light to add a working light. i looked at the specs and cant figure out the largest led light that i can fit on that unit. any ideas?

I have a GX390 electric start powered tractor. I am interested in seeing folks headlight setup on two wheel tractors. I tried to google image search it, and also searched the forum to no avail.

I usually dont shop at Napa, but i needed tractor hydraulic oil, a special zerk, which i didnt know the size for, and a bunch of other items. I live in NJ, so its difficult to find these items. My local "independent" Napa would not honor their online pricing, i had to buy it online, and come...

i have a new milwaukee m12 grease gun, i tried to replace the stock tip to a lock and lube, but can get the stock tip off. i tried a my bench vise, but no luck, and ideas?

I am looking for a good battery charger. Here is what I am looking to do. 1. Charge my dump trailer quickly while loading, before I make it back to the dump. 2. Keep my tractor charged when turn it on and off several times 3. Charge Boat Batteries I rarely need to use it as a starter. I...

I have had Italian two wheel tractors for years. They are tough machines, but I am tired of swapping tires. I would like to get a good set of chains for my machine. Sorry I cant upload a photo from my phone, but it looks like this. Google Image Result for...

Hi, ive been a member for well over a decade, but i never figured out how to do two things. 1. Is there a way to only see certain forums on a "home screen" I really don't need grey market tractors, and other smaller brands? 2. Is there a way to "subscribe" to a post, so your always brought to...

When transporting a BCS on a trailer, how does everyone tie down the engine side of the unit. I used to tie to the engines protective bar. But that bar is attached to the engine, which is then attached to the tractor. And Im not sure that it is strong enough. Any better ideas?

Anyone ever use a logging arch like this with their two wheel tractor? ??????? ??? ?????????. - YouTube

I have a Stihl KM 131 that is 2 years old and has about 50 hours on it, but it is out of warranty. It vibrates so bad that my hands hurt for days. 3 days later and the tips of my fingers are a little numb, even with the anti vibration gloves. I finally put the machine it down for good, until...

My SUV jack cant pickup my loaded dump trailer. What do you guys use for a portable trailer jack for use on the road? How do you store it ?

Harbor Freight Jack Stands Recalled for Risk of Collapsing I have a pair of small ones, but I never trust them for a big job

I have a very soggy lot. I'm trying to figure out the machines with the least amount of ground pressure. I have an acre of grass. I am considering an x350, x380 and a x570. I was assuming 60/40 split of the weight of the machines before accounting for the operator, but I'm not sure if that's...

I have two different npt 1/4 inch fittings for my air compressor. But they don't seem to be interchangeable. The one with a thicker collar needs to be forced a little more. What is the different name of these two fittings? Since I am in quarantine, I need to buy them online.

My dad had an old 5500 watt manual start generator. He struggled start it and cant fill it with 5 gallon gas cans. So we got a 9000 winco tri fuel. We got it delivered yesterday. And with the wheel kit it is too heavy for him. He needs to roll it 20 ft. I put it on a moving dolly, and he...

I have florescent garage lighting, 2 two bulbs 4 footers. It's not bright enough. I am looking at these from northern tool, adjustable between 30000 to 10000 lumens. Thoughts? https://www.northerntool.com/shop/tools/product_200758586_200758586 Any other suggestions?

So I bought a new MS241. I knew it was a leftover, since it is discontinued. But I just realized the saw was made 7/2015! That's nearly 5 years sitting on a shelf. I contacted stihl, and initially I was taken back by their indifference. I'm a lifelong stihl guy, but I am pissed. Thoughts? Am...

Never even heard of anything like this before. Sure its a little small, and its for a niche market, but wow what a good idea for the right application. Axis Corporation Self-Propelled Dump Trailer Operation Video - YouTube

I have a STIHL ms 362 mtronic and love it. I cut about 4 cords per year with it. I was limbing this weekend, and wow my back took a beating. I am considering a second saw. I tried not to, but I don稚 have a choice. I am looking at a MS 194 ce. The rear handle. Since I知 tall, I will get the 16...

I have had larger BCSs in the past, and recently a Grillo 107d. They are just too large for my wife to handle. She wants a small machine. She likes the 710 or 718 for tilling and cultivating, but I am concerned It is too small and the non-differential would make my tasks too difficult. The 16...

I came across a BCS 770, a hydro unit that can run attachments in the front and rear pto bcs 77 - Google Search

Yesterday I can distracted, and left my tractor in gear for about 3 minutes, the tractor started moving, and you smelled the clutch burning. Is this the end for this clutch?

Hi, I am a pretty young guy at 36. I have a Stihl km 131 that vibrates so bad, it really hurts my hand. I have a harness, but it doesnt work for every tool. My hands are really bothering me. I also purchased some anti vibration gloves, but it didn't seem to help. Any ideas? Could it be...

I'm not selling, but came across it. Walk behind Gravely Tractors and attachments - farm & garden - by owner - sale

Who really is happy with how their trailer or dump trailer paint has held up? Seems like all complaints.

So I've been looking hard my first dump trailer, but I am unsure about brakes. I am considering a brake less 3000 lb or a 5000 lb with brakes. How much maintenance are electric brakes? Also, we lease out SUVs, so my tow vehicle will be changing. I am fearful of the expense of new brake...

I need trailer, but our SUV only tows 5000 lbs, and i need something compact in size to fit in the barn, and its pretty soggy back there. I will tow yard debris (less than 2000 lbs), some lumber (less than 1000#) , fire wood (only about half a cord) and maybe stone once every 4 years or so to...

We need a small utility trailer that we can easily store on a project site in New Jersey. A 4x6 trailer would be perfect, but we need it to have a GVW of 3000 lbs along with solid sides. I saw two 219 Eagle Trailer Falcon 4x6 Utility Trailer | Olympic Trailer | PJ and Cargo Mate flatbed and...

I need to store a 1000 lbs trailer off the driveway, and want to push and pull it with a 107d. Its relitively flat, but rough enough that I can't do it myself. Any one have any experience? I would fill the tires. thx

Why are the turf tires so expensive for my grillo? I really am looking for a more cost effective option. Golf cart tires don't work, regular turf wheels don't either

Who collects leaves with a walk behind tractor? The obvious answers are: Rotary Sweeper Pull Behind sweeper BCS 38 inch mower I would consider a trac vac Trac-Vac 47 Walk Behind Leaf Collection Vacuum But I am curious if anyone else has a better idea.

Looks like gravely is at it again selling rebadged rapids. This one is rubber band run and has hydros your find on a zero turn at tractor supply. Just awful. Single-axle walk-behind tractors - Rapid Technic AG Gravely's YouTube site really makes it seem that they built it themselves.

So this is going to sound crazy. My dog barks non stop when I ride my tractor. He is new, and barks from either inside the house, or outside the house. Any ideas how to train him to stop barking at the tractor. It drives my wife nuts.

If your keeping a tractor for 30 plus years, are you concerned about parts availability? A friend of mine is considering: Deere 1023e, built by Deere (finally) Kubota BX 2370, built by Kubota Massey GC1705, by Iseki Kioti CS, don't know who build them. Any thoughts on the how long...

I came across these units. Welcome to TURF TEQ - Professional Grounds Care Equipment I wouldn't buy one over my Grillo and BCS units, but the edger is really helpful. Power Edger - Professional Grounds Care Equipment - Turf Teq Has anyone found an edger for BCS/ Grillo?

I am considering buying either a foreman or a 4x4 rancher. The price difference is $300. It seems like a no brainier since the foreman has 50cc more and differential lock, but I thought I would run it past the TBN... I would be trail riding 80 percent of the time and working 20 percent.

While search for a dual sport motorcycle, I came across this. http://www.suzukimotorcycles.com.au/range/off-road/two-wheel-farm/trojan http://www.suzukimotorcycles.com.au/range/off-road/two-wheel-farm/tf125 Great way to get yourself around, as long as you don't have gear.

How easy it is to remove the handles and arm to a grillo 107d? And pointers? We are looking to store it in a tight space. Thx.

Does anyone have a newer Kohler, Yanmar, Hatz air cooled diesel under 10 hp. How do you like them? How are they in the cold?

So I moved around extensively for work. Now we are settled in a home were a small hobby farm is out of the question. I have a friend with some land 1.5 hours away. It's in a medium deer area. Is this feasible if I can old make it up there once every week?

With winter coming to an end, I'm sure nobody is thinking snow blowers anymore, but does anyone have experience with Rescia Giuliano snow blowers? Their website is garbage, and there is very little info on the Web. Anybody know the intake height of these units? How does the chain drive hold up?

I am considering a small 4x6 utility trailer again. I am looking at two carry on models. One has a wood floor and the other a mesh floor. Other than sound and damage to the load , what's the advantage of the wood floor? My wife will be towing with her honda civic , which is rated at 1000 lbs...

Does anyone have experience with honda cyclone air cleaners on the air cooled Honda GX engines? Positives? Negatives? Sent from my iPad using TractorByNet

If anyone is looking for a legit box blade for their two wheel tractor, I came across this. It's not on their website though, but interesting. It seems a lot better than a blade with ends on it. Sent from my iPad using TractorByNet

I've heard about carb icing. Has anyone heard of icing issues with the Honda gx engines? Is there anyway to reduce the chances. I've read about carb heaters in planes, but nothing for small engines. Sent from my iPad using TractorByNet

ATVs and UTVs are incredibly useful machines. Heck my Kawasaki ATV has brought me to places unaccessible with any other mode of transportation, other than hiking. But I have come across these fat bikes. Its a mountain bike with super wide tires, some of which are over 4" wide. People are using...

This is pretty cool. It would make a big difference to small acerage buyers. Kubota UK Im sure it will never make it to the US. New Holland had something similar in large tractors only.

What tuff Torq Transmission is in the XT3? I couldn't find it on the web?

Whats your favorite attachment for getting rid of leaves?

My buddy has 30 acres of pasture (50 ac total) near Cooperstown NY. It's a family vacation house and he hates cutting. His friend has other 20 acre pasture across the street. If he contracts out is land to be harvested, how much can he expect to make? How many cuts per year? He is a little...

I would like to use a roller pump for light dewatering. I would use a strainer to keep the water going in as clean as possible. If needed I could wrap filter fabric around the strainer to ensure the water is clear. I may use the pump 3 hours per year max, and can't see buying a gas pump or...

Have a Honda GX340 horizontal engine. The rule of thumb is an air cooled gas engine should last 1500 hours. How many hours are people getting out of their GX engines? With good maintenance of course...

We are considering purchasing a Mule 4000 2x4 for work. It will be on grass 99 percent of the time. It may do some light snow removal, less than 6 inches. Could a 2x4 do this? I need a gasser since we have gas on site and EFI.

Does anyone have experience with world mowers? Walk Behinds | Worldlawn Power Equipment, Inc.Worldlawn Power Equipment, Inc. Their 32 inch mower with electric start and a Kawasaki is for sale near me for $1900 new. That is $1700 less than the scag 36 inch.

We are in the market for a small Honda tracked snowblower. All of the reviews I've read have been good. Does anyone have some drawbacks to a tracked blower? We will be blowing a very small lot. 150' x 50'. The ground is paved but a little rough in spots. So I was planning on using the high...

Does the Regent have a serviceable transmission? Or is it sealed like the Deere? Sent from my iPad using TractorByNet

We kept our 107d chained at a jobsite for the past year. Last night someone attempted to steal it. They where unable to move it, but they ruined every cable while turning the handlebars. I need to find the manual, but does anyone know if it goes through how to change the cables. The unit is...

Does anyone have experience with thus lawn cart from Brinly Hardy? http://m.homedepot.com/p/Brinly-Hardy-650-lb-10-cu-ft-Tow-Behind-Poly-Utility-Cart-PCT-101BH/203210748 Any other recommendations under $200?

I'm not a Honda guy, but came across this. Hope it helps someone http://detroit.craigslist.org/wyn/grd/4368003415.html

I love having plenty of trailer as much as the next guy, but I want something small to tow behind my wife's honda civic. I have seen trailers from both red trailer.com and harbor freight. But they don't seem tough enough. She will be towing 100 miles every month or so. Here are the specs...

We received our Earthtools PTO generator Friday and love it already after 3 hours. We need a highly portable generator that only sees use every month. As we use the tractor daily, it is great to know the generator engine isn't sitting around. It looked flimsy on the website, but it is very...

Are there any quick reverse options for a 107d?

I don't see BCS on the exhibitor list. Will they have a few machines?

I may be purchasing a second 107d. I will be running the machine close to 700 hours per year for 2 years. Does anyone has experience with the 8 hp lombardini that earthtools has? Also, I don't see a 8 hp on the kohler website. Sent from my iPad using TractorByNet

Found this tonight. It looked interesting. Sent from my iPad using TractorByNet

Does anyone have experience with a snowblower on a new 710? Earthtools and BCS doesn't recommend it, but I'm curious what the small unit can do Sent from my iPad using TractorByNet

It would be great to have a generator section on this forum. Good job guys.

Does anyone have first hand experience with ariens AX engines by LCT? I've found some good and some bad things about them on the net. Ariens has been using them for 5 years now. Sent from my iPad using TractorByNet

I don't like the brake ergonomics on my 107d. I came across this photo on TBN, are the two black knobs on the handlebar added brake levers? Thanks in advance for your help. http://www.tractorbynet.com/forums/attachments/2-wheeled-tractors/101194d1209147109-gravely-vs-grillo-grillo4.jpg Sent...

I posted in the UTV section and got crickets. I went to buy a gator TS three days ago. The dealer mentioned that they can't get any gators since the factory is retooling for all new models. Is this true? Details?

Tried to order a Gator TS today and was told no orders can be made until factory retools, for some new models. Does anyone have details? Sent from my iPad using TractorByNet

I need to install a headlight on a Grillo 107d. What is the largest wattage I can install and not drain the battery?

Does anyone have experiance with a silt fence installer in a three point hitch. I want to pull one with a sub compact.

I called earth tools for a quote on a 107d electric start. Do people get prices lower than the quoted prices online? Sent from my iPad using TractorByNet

At work we need a cheap pusher for 400 carts on gravel. Can I get away with a 710 or G85? We have a 852 that will be doing "other things"

How many hours can you expect from a diesel light tower. The rental houses sell them between 2000 and 3000 hours. However the small 7 kva wisperwatt generators they sell after 25, 000 hours.

We are going to install a modest light gauge wire fence. When I checked out the tractor supply website they didn't show any plastic coated fence, only galvi. Does anyone know the difference between galvi and plastic coated as far as longevity?

We have had a spot that has gotten no sunlight for years due to massive trees. We finally cut the trees down, but we cant seem to establish grass. The slope is 35 degrees or so, and every rain storm the seed is swept away. We tried straw to hold it all in place. Any other suggestions?

There are some great new videos of BCS tractors on youtube. They seem to be added in the past month or so. There is a great video of a 852 with tracks. I cant attach a link on this mobile app.

I came across this on craiglist, and thought I would share. 1953 International Super C Tractor

Does anyone have any experience with subaru brand generators? It seem that everyone is making them these days, but I am curious about the quality. I have owned their engines in the past, and they have treated me well.

Does anyone have experience with Interstate cargo trailers? I am looking at a 5x8.

I am looking into registering my 24 foot 7700 lb trailer in Maine. I found a couple great websites with info. I live in downstate NY and am looking for any negatives on this. As it stands I can save $100 per year, plus 70 bucks upfront. Anybody have any info

What happened to the BCS tracks? Are they still available outside the US? I am more curious than anything. A link below has a little info, and a photo. Accessories

First, I hope I am putting this post in the right spot. I need a new portable generator, due to the length of outages, and the need to move the unit, I am considering a Winco Tri Fuel generator. Does anyone have experience with these units?

I know used BCS machines are tough to come by, but Theros equipment outside DC sells quite a few. Of course they are all previously rented units.

My father in law has heavy tree cover, and his lawn has never been great. What seed suggestions would anyone have for New York? We don't get a lot of rain. I looked this up online and found little that helped me for northern states. Thanks in advance

What brand / model of transmission does a 5252 have?

I am considering purchasing my first snowmobile. I never realized how many trails there are close to New York City. I am considering a Yamaha Venture touring sled, 2 stroke. Any suggestions for buying a used sled? I have done some research online, but I trust the opinions here. I wish I...

Check out this Monster Walk Behind. Microtratores ou Motocultivadores Tramontini - Torck Tratores - YouTube

Are there any mahindra volume dealers out there? I am looking for a comparison for the price of a max 22.

I am surprised that BCS had another 10 percent price increase this year. What's going on? Is demand increasing? We run them at work, but if these prices continue to go up, we need to look at other options. What do you guys think? Are the prices too high for you? What did I gravely cost back...

What is the PTO HP of x495?

I went to return something at Best Buy today with out a receipt. They wouldn't take it back for store credit. Their new policy is no receipt, you get nothing. This is the last time I will shop there. Am I right here? Do you agree this is?

I am looking for a good farm show for CUTs, Sub CUTs, and implements. I am willing to travel up to 4 hours from NYC area. Any suggestions?

There seem to be more diesel cars now than ever. Unfortunately, many are premium brands such as mercedes, bmw, and audi. Who has never diesel cars? What do you have, would you buy another, has reliable has the car been other than the engine. We had a 77 Mercedes diesel that we ran for...

What's the going price for a J2020H? No loader no valves. Thanks

I know that gravely made post hole diggers back in the day, does anyone make them for today's walk behinds?

I went to Costco today and saw a sign that anyone can buy gasoline there, The station is in NY. Other Costco's l've been to in other states don't allow non-members. Is there a law about "private" fuel stations in NY? Can we get fuel from places that are off the beaten track? Maybe at a...

What's the deal with the iGX motors. Has anyone used one? Do you need to "program" the engine for the application? Would they work for a two wheel tractor? Which will use different attachments.

How many hours does the 852 last with the standard fuel tank when mowing? Are there any extended fuel tank options?

I am looking at a BCS diesel from earthtools (852). From what I see about these diesels they seem to be a pain. Oil level, terrain, fuel filters, engine priming all seems like a lot of work. Is the fuel savings, lifespan, and power worth it? I will be running the machine 200 hours per...

I am very impressed with the supersteer system. What is the smallest frame with supersteer as an option? I would consider new or used. Thanks in advance

What's the deal with the Deere itorque engines? For example in the x300 or x500 series? Are they just standard Kawasaki's, with a Deere sticker? They say have have "lugging ability", but I don't buy it. How long can one expect from one in hours? 1500 hours like a normal air cooled engine...

My dad has a Briggs and Straton Generator. It has no frills, but gets the job done. It has about 150 hours on it in 8 years. He can't pull start it anymore, can a shop add electric start? In the northeast power outages rarely take out natural gas. I know he would like the generator to run...

I will not be using my 06 Toyota Tacoma for nearly 3 months. I have put fuel stabilizer in it. What else, if anything, should I do? Would it be best to run it weekly?

I have a boat trailer, yesterday i noticed that the grease was escaping and was all over the inside of the wheel and tire. I dont have alot of experiance with trailers. I checked the ez loader website and got a blow up picture. Is this something i can fix myself? Are there any tutorials online...

I hear from a dealer yesterday that BCS is coming out with an air cooled yanmar diesel next year for the 8XX. If you check the Yanmar website the largest EPA certified engine is 8 hp. How many people would need an air cooled diesel? How long do they run? What would you guys buy?

I need a tarp that is 20 x 12 to cover a boat... I go through the poly ones quite often. Any suggestions on fabrics and a place to buy online? Thanks Guys

I would like to find a boating and Fishing forum similar to TBN, I am having a real rough time finding one... anybody have any?

I am hoping to get a 2 stroke 40 hp aluminium fishing boat from the old man. I was curious if anyone knows the amount of hours until one of these motors require an overhaul? How about just the engine itself? It is a pre mix engine... please help

I was thumbing through they kubota and jd website and was looking at the min turning radius for the kubota BX 2230 and jd 2305. They are about 7.5 ft but nowhere does it say how they are measured. How is this measured? What are the uncut radii of of the tractors with the 60' (kubota) and 62"...

I have a 11 year old murray (hold the jokes please ). It is a rear engine rider. The front tires have been coming off the bead constantly for the past year. Does anybody have any hints to stop this?

My old man expects me to pick up a season's worth of leaves with an electic blower circa 1975. We are planning to pick up a gas model tomorrow, do you have any suggestions?

I am curious if the Deere advertisement here on TBN is showing us the new 300 series L & G Tractors. The grill seems to be of no current model. Also I dont think the hydraulic levers are yellow on current 300 series If I am wrong I am sure the deere faithful will tell it how it is. The 2210...

I try to stear clear of the box stores as much as possible. I was in Home Depot yesterday and say this power washer. It has the Honda GX engine and a Cat pump. My old man is looking for one, what do you guys think. power washer sorry guys i cant get the link to work. it is the 6.5 hp Excell...

A guy at work was telling me he was going to buy a powerwasher, curious if they make PTO powerwashers. If they dont it would make for an interesting project.

of course i just started my job and my car died. i need a new (to me) truck. I would like a diesel. My mother had a 1977 mercedes diesel and put 436,000 miles on it. Any comments on the engines, is it worth the extra cost. They are hard to find used in extended cab models. any websites would be...

i was wondering if anybody knows when JD is planning to come out with the next generation 300 series lawn and garden tractors... i know there is a dealer out there who knows something!

i was on another tractor site where someone posted that the AWD system on the 455 will last until 1100 hours. But the yanmar diesel would last between 5000 and 10000. How long will an AWD system last? how reliable is it? what is the uncut radius (with either the 54" or the 60")? and can one blow...

I have made several posts about the BCS two wheel tractor. I would love to run a PTO generator off it. It has a 1 3/8" PTO that "nearly runs at 13 hp" the issue is that it also runs at 990 rpm! is there an easy way to run a generator off this machine?

I know that the BCS has a standard PTO option (1 3/8") does anybody know the RPM and PTO horsepower of an 852? can i run a generator off it? how can i figure it out?

This is my first post, glad to be on TBN. I have been following this site for about a year. Thanks to all those to post and help those who are new! I am about 8 months away from a purchase of a BCS 852. I am considering making side money by cutting 5 lawns and snowblowing like 4. EarthTools...