Search results

Now I just need to get it dirty.

Signed on the dotted line for a L2501 HST with a B77 backhoe and thumb. I’m in the process of renovating the house that my mother was born in, and there is a good bit of clearing of brush, rehabbing a creek, building a couple of retaining walls and backfilling, etc. Looking forward to getting...

I’m getting close to purchasing a tlb. I’ve narrowed it down to an LS XG3035 HST and a Kubota L2501 HST. I am going to attach a mechanical thumb, but I haven’t seen an LS backhoe that has the mounting holes. Kubota has a reinforced mounting ring. I’d prefer not to have to fabricate one. Any...

Here is the pickle. I found a great deal on a Kioti CK35HST with 850 hours. Good sound tractor, very well maintained. With a 6' box blade and 5' cutter, just a hair over $12,500. Then along comes a Kubota L2501 HST, 75 hours, same 2 attachments, $15,500. I've owned a Kioti and a Bobcat...

I found a great deal on a Kioti CK35HST. The only downside is it has 853 hours. It looks like it has been very well maintained. When does a tractor start showing its age in hours? I am also looking at a CK27 gear with only 150 hours for just a little more. I just like the idea of the HST...

Not one, but TWO tractors! I had planned on getting a finish mower to go with my new Kioti CK4010H, but instead, I found a BX1850 with just over 145 hours. With approval from the boss, I got them both. On the Kioti, I upgraded to telescoping lift arms, and installed a top and tilt kit. A...

Two months ago I sold my Bobcat CT225. It was a great tractor, but just a bit underpowered. After a lot of going back and forth about what I really needed/wanted, I pulled the trigger this afternoon. Arriving next week after Gary and the fellows at West End Sales get everything put together, is...

Two months ago I sold my Bobcat CT225. It was a great tractor, but just a bit underpowered. After a lot of going back and forth about what I really needed/wanted, I pulled the trigger this afternoon. Arriving next week after Gary and the fellows at West End Sales get everything put together...

I'm installing a wood stove in my workshop and I'm having trouble finding flashing steep enough. I have a 14/12 pitch roof and most flashings just go to a 12/12. Can I cut out the high side just a tad to make a 12/12 work? Any suggestions...or sources for a 14/12 pitch flashing. Here is a...

I'm in the process of installing a a wood stove in my shop and when I went to price out the 6" chimney pipe I needed, I just about fainted. For a 15' run (I've got a 14/12 roof so I gotta go all the way to the top to get clearance), it's going to be over $500 in pipe alone. Does anyone know...

It's time for a timber harvest. I have 20+ acres of mixed hardwood acres. I've contacted a forester who is gonna cruise the land in a few weeks. Does anybody have a ballpark per acre value on good standing hardwoods? I'm not planning on clear cutting, just selective harvesting. I'm just...

I need to get my parking pad in front of the shop squared away. I'm planning on just a gravel pad. The topsoil is off and the soil is stable, I just need to know the order for my gravel. Planning on two layers. Is it crush and run on bottom and 3/4 on top, or do I make the 3/4 the base and...

After "deconstructing" the old barn on our property, I've been putting together a few odds and ends. Here is a cabinet I put together. I've made several coat racks, a large mirror, and key hooks and other stuff. The door is an old window that was found in the...

Since I didn't have enough to do this winter... My wife found a 1983 Terry Taurus camper on Craigslist and talked me into going with her to look at it. You can guess how this ended. I found myself dragging it home the next day. Truth is, for a 31 year old camper it was in exceptional shape...

I've been putting some of my old barn wood to good use. These are my latest creations. I will be doing these in custom colors...JD green, IH red, NH blue, Kubota orange, etc. Perfect place to hang your favorite farm hat. I should have details of these up in my Etsy shop by...

Be been having fun with all of the barn wood I've salvaged. Here are a few of the projects I've been playing around with.

Started small...a key rack. I have tons of spare wood and plenty of ideas.

My Dad never threw anything away. This became painfully obvious after he passed away. When I started cleaning the old barn so I could tear it down and salvage what I could, you would be amazed at what I found. Just a sample... 20 old oak school cafeteria chairs. All of them in excellent...

Where is the best place to get filters for my CT225 50hr service? Is there a good source online or should I drop by my local Kioti dealer and cross match the CK27 filters? Where do you guys get yours?

So I think I have found the right plan that will fit perfect on the property and I can build myself. I think. I hope. Over the years I have slowly increased my knowledge base and tackled larger and larger projects. However, This will be the largest one to date. I am handy with tools, can...

I got a little frustrated with my toolbox that wasn't even big enough for a half dozen linch pins. So I made something that will hold what I need...including chains. The pitifully small OEM box The box A place for chains, a place for pins and tools Looks ok but kinda plain...

The toolbox that was standard on my Bobcat CT225 was just slightly north of useless. Seriously, what was the point of that plastic afterthought? I could barely fit linch pins in it, much less any necessary tools. After rummaging around in the shop, I found just what I needed to remedy the...

I need a generator for use around the property. Anyone have experience with PTO generators? Just wondering what pros and cons the were between them and a regular gas generator.

I am going to be putting up a prefab metal garage on a slab in the next few months and was wondering if anyone has ever finished the inside of one of these. I am looking at a 18x36 and will wire and insulate it. I am also going to build a TV/game room in the back by framing it out and paneling...

Any ideas or suggestions on where to find a jib boom to fit a bobtach bucket mount? thanks!

I spent my day off trenching and replacing the drain line at my Dad's place. The bottom of the hill was a bit wetter than I anticipated. Things were fine trenching down the hill. The attempt to back up the hill was far less successful. Mud under the high grass. Wet, red, clay mud. I...

In the middle of the day. In the heat. Like an idiot...but I got some results!

I've got a Bobcat CT225 and I'm looking to drag a flail mower behind it. Primary use will be to cut pasture grass (less than a foot...usually <6") and the right of way on my road. Can I get away with a 72" or am I getting a little ambitious? 28HP, 20@PTO Any advice is welcomed. Thanks!

I've got a Bobcat CT225 and I'm looking to drag a flail mower behind it. Primary use will be to cut pasture grass (less than a foot...usually <6") and the right of way on my road. Can I get away with a 72" or am I getting a little ambitious? Any advice is welcomed. Thanks!

So it begins...my wife and I were tired of the original walkway. Time to start a new one. When finished, it will be 7'x28'...and that's just for starters. Eventually there will be stone flower beds and a retaining wall integrated into the hardscape. Then the patio with built in fire pit...

Looking into buying a small dump truck for farm use. Something under CDL for hauling stone, brush, mulch, etc. Anyone bought one and thought "how did I ever manage without it?". Or was it "what the he!! was I thinking...this is a money pit!". Just wanting to hear some pros and cons other...

Ordered them on a Friday, they were here on Monday. Quality, solid pieces. I put 3 on the top if the bucket and backed one with a clevis/shackle. Thanks Ken!

Had it a week now and I just gotta say, I love it. I sold my John Deere 1070 because it was a bit too big for what I needed now that the house is built and all the heavy lifting is done. The CT225 is plenty maneuverable on the property and has just the right amount of HP to run my finish mower...

I loved my old John Deere 1070 but now that the house is built, the fields are cleared, and its just a question of maintenance, I decided to downsize. I looked at the local Kubota dealer and really liked the B3200. The dealer was friendly, and priced competitively, however, at PTO speed, the...

I've been in the market for a new, smaller tractor. I loved my JD 1070, but it was 20 years old and a bit too big for what I needed now. While looking for a replacement, I posted the tractor on Craigslist while I began my search. I looked at most colors, Liked the Kubota, B3200, really liked...

I am picking up a Bobcat CT225 and am hoping not to have to buy or borrow another trailer. Mine is rated 3500 on the axle and the tractor is right at 3500-4000. It is a 600 mile trip to bring it home and I won't be using ths trailer to haul the tractor any more. If secured, and careful, can I...

I had finally settled on a Kioti CK35 HST and was just about to sign on the dotted line. I decided, on a whim, that I would give Rick Wallace a call and see what might be on his lot. Good thing I made the call. He had a Bobcat CT235 (the albino Kioti CK35) for 3k less, delivered to my door...

I was all prepared to pick up a CK30HST then my dealer offers a CK35 Shuttle for the same price. My last tractor was a gear without shuttle shift and I managed fine. My primary work is mowing a 3 acre field and a steep acre of yard. Every now and then I do some loader work but that's not the...

I have been trying to find out the weight of Kubots's LA504 loader. It's not printed in the specs but I was wondering if any of you fine folks knew how much it weighed. Thanks for the help!

Nothing like building a fire in the barrel stove and messing around in the workshop on a cold day. Every now and then you gotta take a break and make yourself comfy in front of the fire...and enjoy the company of a good friend. :)

It looks like my JD 1070 is going to be sold so now I have to figure out what the replacement is going to be. I had narrowed my choices to 3; Kubota B3200, Kioti CK30, and Massey Ferguson 1529. I drove the Massey today and ruled it out...the ergonomics were just all wrong for me. The B3200...

I am selling my JD 1070 and am looking really hard at a B3200. I need something a little smaller for the property now that the heavy work is done. The problem I have is all my implements are 6 foot. I am sure the B3200 can handle my finish mower and my landscape rake, but how much of a strain...

I have a dilemma. I am wanting to downsize a bit but struggling with which direction to go. I have a John Deere 1070 with a 4-n-1 bucket that is a great machine. Less than 1200 hours on her. However, I find myself doing a good bit of mowing and general upkeep anymore and don't really need...

I've got a '92 JD 1070 4wd with a 4-n-1 bucket that I am thinking of selling. It has a hair over 1200 hours on it, and a canopy with a couple of cracks from getting a little too close to some low hanging branches. Over all it is a great machine, but now that the house is complete, I find its a...

I am thinking of trading my John Deere 1070 for a B3300. For the work I find myself doing anymore, the 1070 is about too big. The problem I have though, is all of the 6' attachments I have. I know I won't be using the 6' box blade or bush hog, but what about my finish mower? It's used just...

A boy and a girl. Named them Lucy and Ricky. She is laid back, he is a bundle of energy. Went for a walk this afternoon, now it's time for a nap.

I'm looking at building a small workshop in the 12x24 to 16x32 range. I am fairly handy but would like the convenience of a pre cut kit. Anyone gone this direction and have any advice or recommendations on companies, etc. Thanks in advance.

Would it do any harm to my 1070 if I were to cut off the top 3-4 inches of the exhaust stack where the turnout is and replace it with an old school exhaust rain cap? The bouncing of the old rain cap reminds me of seeing my Dad on his old Allis-Chalmers...it would make me think of him every...

I need to get a good tool box for my Nissan Frontier. I've got a Lowe's (with Kobalt brand) and Tractor Supply in my little town. Anyone have a review on a tool box from there?

Just getting some ideas... Skin side up or down? How do YOU do it and why? How long do you cook your porker? Rub, inject, baste, or a combo of all 3? Any recipes, hints, tricks? I will be building my roaster tomorrow and will post pics. I have a plan (sort of) for my pig, but still...

We are roasting a 100lb half pig next week. I am building a concrete block pit, using charcoal, and smoking/roasting for ~10 hours. Any tips, advice, recipes, etc?

Anyone had any experience with these mowers? I know they are Italian made, but that is about it. Any info would be appreciated.

I am looking to trade my JD 1070 for something with a bit smaller footprint but still keep most of the HP. All of my implements are 6ft and I don't want to have to reinvest. Can a CK35HST handle a 6ft bush hog (mainly pasture mowing and light brush) and a 6ft box blade? Thanks!

Any suggestions? Preferably in western NC.

I have a 1992 model 1070 with a 4way bucket FEL. It's been a great machine, but as I have finished most of my larger projects over the years, I am thinking about downsizing. It's a little big for some of the work around the yard. My problem is finding a definitive source for pricing it to...

Have a '92 107 with 1148 hours. Great tractor, but lately the starter hasn't been engaging the first time, every time. I have gotten to the point of gritting my teeth every time I turn the key just in case I hear the screech! Is there any remedy other than replacing the starter? Also, what...

Need to build a new pig cooker and the only mesh I can find is galvanized. Does anyone know a supplier that sells this?

Just curious as to who really lives in the country. How far to your nearest grocery store, fast food restaurant, or <gasp> Wal-Mart? 14.8 miles to the closest grocery store. 19.2 to the preferred grocer. Wal-Mart relocated from 15 miles away to 21. But on the upside, TSC built a store next...

I am not going to have time to take care of the fluids and filters myself this spring. Any idea on the ballpark cost of having my fluids and filters changed at the dealer? All fluids and filters. 1992 JD 1070. Just wanting to know about what to expect. thanks!

I have discovered that I can't do without a trailer. I am tired of loading everything in my truck bed. My 5x10 utility trailer is the perfect platform for haling lumber, mulch, rock, block, and anything else that would mess up the truck bed. Just an observation. I wonder who else feels like...

Am looking to build a small pond using the contours of my land in a spot fed by a spring on one corner and a small stream on the other. Nothing huge...about 150 x 100, probably 8 feet at the deepest dug part. I have all summer to work on it so time isn't an issue, but my question is, how...

I am wanting to have a pig picking this year as a going away party for a few folks that I teach with who are moving out of our district. I have never cooked a whole hog myself, but I am a quick learner and pretty detail oriented. Besides, as long as I keep a keg nearby, I am sure to have lots...

I'm looking to get a generator for projects away from the house and the occasional power outage. Any recommendations on a 3500-4000 watt portable. Also, any thoughts regarding pot generators?

I am having a carport shed (18x21) delivered to my property for my tractor and a couple of implements. I want to have power at the shed for running pressure washer, grinder, etc. when I need to work on things. I don't particularly want to wire the shed, but I was thinking of putting in a 16'...

I am wanting to wire two or three work lights on my JD 1070. I have done a few small home wiring projects, but haven't attempted any projects this ambitious on my tractor. Where do I start? Is this an easy DIY kind of thing? Any help will be greatly appreciated. And yes, I'll post pics...

I am looking at putting a quick hitch on my JD 1070 and was hoping for some feedback. The iMatch is gonna be tops in price but guaranteed fit. However, I have seen prices ranging from around $250 for the Tractor Supply version to $109 for the Northern Tools model. Anyone wanna offer a review...

Old Manor stone and some landscape adhesive from Lowes...the twin to this column is on the other side of the driveway. A little patience and some heaving lifting is all it took. My wife thinks I am awesome! :laughing: The driveway was paved the day after...I'll post some more pics after I...

I am trying to get a driveway put in before the weather gets too bad. We are gonna havelows in the 30-40 range and highs of 60+ for the next couple of weeks. Is it realistic to expect a hot-mix drivway to be put in and compacted well with those types of temps?

I just got an email from McGee Equipment. The 6' Kodiak tiller and 6' lawn aerator I ordered will be arriving at the terminal Tuesday. I see beautiful tilled soil and a lush green lawn in my future. :)

I've got an extra couple of acres that I am thinking of turning into a pumpkin patch. What are some of the better varieties for carving pumpkins? I am planning on selling a few, giving some away, etc. and want to know which pumpkins you have the best luck with. Also, if I plant more than one...

I just had a large portion of my yard graded in prepartion for getting the driveway paved befor winter hits. My question is how late can I get away with planting some rye-grass and get it to come up to keep things from washing?

I just ordered a Kodiak 6ft tiller from McGee. I've been lugging around a Kodiak rotary cutter for a couple of seasons now and have been pleased with the performance...I am hoping the tiller will be as solid. Does anyone have any experience with any other Kodiak equipment?

This weekend, the school where I teach is having a workday to clean up and refurbish our nature trail. It's a beautiful trail that wanders through the woods and crosses a pond on campus. We have a wonderful science teacher who received a $5000 grant to clean up, replace signs, repair two...

I am looking for a good, reasonably priced 7' finish mower. Does anyone have any recommendations? I am hoping to keep the price below $2500...and (just like everyone else on here) would love to find a good bargain.

Any suggestions for a good replacement seat? I have a JD 1070 and don't want to replace it with another OEM seat. Any suggestions for comfy seats?

What is a good replacement seat for a 1070? I don't want to get another stock one cause frankly, it's uncomfortable. I feels as if I am being pitched forward all the time...not good for long periods in the saddle. Anyone replaced one with a non OEM seat? Suggestions appreciated!

I'm in the market for a small or medium framed 9mm for concealed carry. What do you guys recommend.. Not exactly a newbie to guns, qualified on the Beretta M9 in the Air Force, but just an occasional shooter. Also, my 16 year-old daughter wants to learn to shoot so I don't want anything that...

I've got a JD 1070 FWD and I'm looking to get a box blade. I am certain it can handle a 6' with no problem at all. With 39hp can I reasonably expect to handle a 7'?

I replaced the battery on my 1070. Started right up Friday. Today, not so much. I am getting the lights, then a loud click, then noting...no lights, no more clicks. I can disconnect the + lead, turn the key...lights, then big click again, then same thing - nothing. It sounds as if something...

my owners manual calls for 550 CCA...can I move up to a 650 or even a 950 CCA battery?

Where is a good place to get a replacement battery that doesn't cost an arm and a leg? TSC has Exide batteries...any reviews?

So my battery light on my 1070 kept coming on and I got a little worried. I read the trouble shooting guide and it gave three possible culprits. 1) Low rpm speed. Not that, I was running between 1500 and 2600 (pto rated). 2) Bad alternator. Don't think so...it had been going on for a couple...

So I was checking out Craigslist the other day and saw a Kodiak 6' rotary brush cutter advertised...called the guy, found out it was a young dude whose grandad owns an apple orchard, no longer had use for his cutter, only 3 years old...asking $400...crazy deal but small problem, missing front...

A guy has a kodiak rotary cutter for sale locally that's about 3 years old...asking $400...gonna go look at it Thursday. These things retail new for around $1400...should I assume something's fishy?

Where is a good place to get barn plans? I need to get something that's engineer stamped...nothing really fancy...just good storage and work space.

Seems like a really good group of folks. Anyone have any feedback concerning them? I am looking to get a box blade and I like what they have.

I am trying to determine the best size for my 1070 4wd. I figure a 6' would be no problem, but am I getting a little too ambitious thinking about a 7'?

How big of a plow can I pull with a 1070? 38.5hp, 4wd. Can I get away with a 3 bottom or will a 2 bottom be the limit?

I need some recommendations on a good log skidder plate. I have been using my boom pole, drawbar, and bucket hooks (essentially whatever was handy) to get some of my logs out, but since I want to do some more serious clearing I think I need something specifically designed for what I am doing...

Could anyone tell me how it's done? I know it is supposed to be simple, but I was just curious the steps. I think I am going to take mine off to do some field work.

After seeing some of the projects here, I am starting to lust after a sawmill. I have the perfect place for it, plenty of timber on my property - tall hemlock, white pines, tons of poplar, and assorted other hardwoods...now if I can just convince the wife of the necessity of one.

I am looking to get either a medium duty or heavy duty cutter for my 1070. I am sure a 5' would be no problem, but what about a 6'? Do any of you guys have any advice? FYI, the 1070 is 39hp with 35 at the PTO. thanks!

I need a swinging drawbar for a JD 1070. Any idea where to get one besides the JD parts store? I want to avoid paying $170 for one!

Here is another question that might leave some of you veterans scratching your heads at a newbie, however...here goes. What is the max tilt or slope that you feel comfortable with? Granted, I know the standard "if you feel nervous then it's too much" kind of answer, but do tractor...

Lesson one: I weigh a lot less than my tractor. There is a small creek / swampy area on my property that has been there since I was a tiny lad. In my 47 years it has always been swampy. One would think I would remember this not-so-insignificant fact. Having a new piece of equipment...

I've had my new-to-me 1070 for a day...and no, I haven't broken anything...yet. However, the back (blade) half of the bucket is a little bent...actually warped may be a better word. There is a gap of about 2inches toward the center when the clamshell is closed. (see attached) Any suggestions on...

I've had my new-to-me 1070 for a day...and no, I haven't broken anything...yet. However, the back (blade) half of the bucket is a little bent...actually warped may be a better word. There is a gap of about 2inches toward the center when the clamshell is closed. (see attached) Any suggestions...

Now my wife won't have to hear me complain "we need a tractor." I just picked up a 1992 (but new to me) John Deere 1070 with 4WD, canopy, and 4-in-1 bucket. Only 1091 hours, runs crazy smooth and is ready to do some serious work. All this for an amazing $9500. There are a couple of minor dings...

Now my wife won't have to hear me complain "we need a tractor." I just picked up a 1992 (but new to me) John Deere 1070 with 4WD, canopy, and 4-in-1 bucket. Only 1091 hours, runs crazy smooth and is ready to do some serious work. All this for an amazing $9500. There are a couple of minor...

Found a 1992(ish) 4wd 1070 with FEL... 1100 hours looks pretty good. I haven't had a chance to crank it up and drive it, but I plan on it. Asking price is $10500. How does that sound to you seasoned John Deere pros?

Just curious what some of you folks consider must haves. Be it wood-working tools, mechanics tools, or anything...what occupies a place of honor in your shop?

I am looking to put down a 20x30 concrete slab for a shop/shed I am going to build. Thickness will be 4". Have any of you folks had concrete work done recently and know a good ballpark estimate for a simple slab?

Any folks in the Southeast recently bought a CK35? I am looking for some ballpark figures so I won't start my shopping unarmed.

I keep hearing folks talk about a skid steer front on a tractor...what does that mean? I know all about skid steering in regards to bobcat style equipment and tracked equipment, but when someone says skid steer regarding tractors, I just smile and nod...:o Is this referring to steering with...

I just got a call from a dealer I had been talking to regarding a DS4110. With the new programs from Kioti, he quoted me a $17200, with quick attach bucket, and fluid in the tires. Two questions I have. How does this pricing sound to you guys and have any of you driven the DS4110?

Today was a gorgeous day for working in the yard...65 degrees and sunny. So the wife, myself, MIL and a couple of nephews trim some old brush, haul everything to the burn pile and then call it a day...almost. I decide to take the old Craftsman lawntractor up and down the hill on my yard a few...

I am going to start clearing a few acres this spring...mostly scrub pine on a hill that was pasture 30 years ago. I am hoping not to encounter too many legless creatures, however, the occasional rattler and copperhead have been spotted. What kinds of snake loads do you guys carry? I prefer to...

I have decided to go ahead and build my tractor shed this summer in anticipation of picking up my machine in the fall. Its going to be a fairly simple structure - 20x30, 2 open bays, one closed for secure storage. I don't have to worry much about snow load so I am going with a shed roof and...

I am beginning my drawings for my run-in shed in anticipation of my fall tractor purchase (I have decided on either the DK35 or 40) and I need to know the length of the machine with FEL attached. I'm not building anything fancy...shed roof, closed sides and back, 2 open bays, one enclosed bay...

Another newbie question... I am trying to decide between R4 and ag tires on my future machine (planning on purchasing within the next 3 months). I doubt I will use the tractor on the yard with the exception of crossing every now and then. My main purpose will be land clearing, leveling...

Could anyone give me a general idea what the cost per yard is for concrete. I am looking to pour the floor of pole barn.

Does anyone have experience with the DS line Hyd. clutch shuttle shift? I am wondering how easy it is to use/maintain and how it might compare with the hst. The DS line looks like such a great value, but no hst available.

Is it bad form to ask what others paid for their machines? I am just trying to get a good idea what to expect. I am looking for a DK40HST with a FEL and ag tires. I have been looking at the "other" orange tractor and have found a good price on a L3700, but I keep coming back to look at the...

I stopped by my local Kubota dealer and he had a pretty new L3700SU on the lot which he let me take for a spin around the place...perfect cockpit for a 6'3" guy...everything in easy reach, drove like a dream...I am in trouble...I think the buying timetable has just been expedited...

I am looking for some ideas on building a pole barn/shed for my equipment. Nothing too fancy...most likely a gravel floor and apron and if i get ambitious, i might add a workshop on the end. Anyone built anything similar?

What is the "normal" or best box blade size that a L3400 can handle? Also, would dropping from a 6' to a 5' bush hog give you any more power to cut into rougher or heaver stuff? Thanks again for all the help you folks have given!

Can anyone give me some feedback on using a tooth bar on their FEL. I am looking at getting one to help with clearing some acres of scrub pine. Is it a worthwhile investment for land clearing?

Another question for the guys who have already been there. What are some of the pros/cons of new vs. used machines? I am leaning way in the direction of new because i don't want to inherit anyones problems, but I need a little more ammo to convince someone in particular that this is a lifetime...

So I had a chat with Brady at Barlowe's...awesome folks there. He was telling me all about the good with the L3400. Any other 3400 owners out there that can tell me how bullet-proof it is? I'm not gonna kill it, just clear some scrub pine, do a bit of trail clearing, box blading, maybe plow a...

I have found both machines for essentially the same price. I know the views here are slanted toward a particular shade of orange, but could you Kioti owners tell me why I should go your way. Any advice/encouragement would be appreciated!

I have found both machines for essentially the same price. I know the views here are slanted toward a particular shade of orange, but could you 'bota owners tell me why I should go your way. Any advice/encouragement would be appreciated!

My local dealer quoted me $17455 for the B3300SU, including loader and tax...how does this stack up? I had looked at a Kioti CK35 for about the same price...this sounds like a good deal to me.

I am looking to pick up a brand spanking new CK35 this week but am still debating between Ag or R4 tires. Here's a quick profile: 25 acres, 70% hilly, woody, with fair to poor logging roads throughout. Will be doing a bit of light bush-hogging, earth moving, and pasture leveling. Will also...

I have finally decided upon the CK35 and have found one with a FEL at the local dealer for $16200. From what I have seen, this seems like a very fair price. Any feedback on those numbers? Thanks!