Search results

I'm thinking of getting a 5 foot snow pusher. I have a gravel drive that is about 600 feet long. I'm thinking it might work better than my bucket and turf tammers as far as being more efficient time wise? My bucket always seems to pack up with snow. Any thoughts?

I notice that my inner tie rod ends had play in them while putting chains on my front tires. Ordered a set from my dealer and they are a heavier design. Called my dealer and he said Kioti has redesigned the inner tie rod ends? Turns out they wont work with the original outer tie rods so I have...

I'll be coming up on just about two years since I changed both filters and hydro oil to mobil 424. I maybe have 130 hours since. My manual seems a bit vague. I take it trans oil and filters every 200 hours? Just wondering what you guys do? BTW fluid is super clear.

Looking at buying a one owner Jd 318 with 715 hours. Been garaged all its life but paint is a bit faded. Seat has been replaced. Engine surges on start up but I believe that is due to old gas. Service and owners manuals. Deck is a 50" that appears to be in good shape. These seem like very...

Anyone with a 2610 upgrade their loader to a kl4030? Love my tractor but wish it had a bit more lift capacity. I would like to trade my kl2610 loader for the kl4030. Has anyone done this? Is the 2610 able to handle heavier lifting? Thanks.

Changed my fuel filer on my 2610 today. I removed the plastic part on the bottom of the fuel filter and cleaned it. I installed the new filter and put everything back together. I had a had time priming the new filter with the plunger? The o ring on the bleed screw looks to be in bad shape. I...

Anyone else use more than a gallon of UTF to refill the front axle? I check mine with the dipstick just setting on top of the fill hole. Well over a gallon to get a small amount on the dip stick. I run it with about 1/2" showing on the dip stick when full. I bet I used a least a Gallon and a...

I'm coming up on my Hydro fluid service. I see Summit Racing has a great deal on 2.5 gallons of Mobil 424 for $32 after a $5 rebate. I'm thinking of grabbing 3 containers? I understand it's good stuff? Any Comments?

Can't seem to find my owner's manual? Have to look in the Barn tomorrow? I changed My Hydro fluid and filters at 50 hours. Is the next fluid/filter change at 400 hours? At 260 hours now. Fluid looks nice and clean. Thanks.

Can any of you guys tell me what torque Ft/lbs you are using on the loader mounting bolts? I know they are a 10.9 grade bolt. I've been using 125ft/lbs but I'm sure it should be more? Thanks in Advance.

I just installed my new stabilizers from Mark Hodge at Stabilworks.rocks.com. I am very impressed with the workmanship. Mark is super to work with. I had to take a few measurements for him as he didn't have any info. on the 2610. My set was $239 with shipping. I'm sure price varies on your...

Thinking of trying this stuff.Robot Check What do you guys think? It's made in Texas. I want a full synthetic for cold weather. About the same price as Super utd.

I started my tractor this afternoon and let it warm up for about 30 minutes. I keep it in a 3 sided pole barn with no electric. It started ok after a single cycle of the glow plugs. The hydraulics where very slow even after letting the tractor run. I took it easy moving the FEL until things...

After having my front end slide around while pushing snow I'm putting chains on the front of my 2610. My dealer suggested 2 place vbar ladder chains but did not have any in stock. I have a set coming from tirechains.com. I have R1's on my machine with loaded rears. I use edge tamers along...

What size BB are you guys using on your 2610's? I can get an LMC in my area and was looking at a 5 footer. They seem to be very heavy for the money??

My ck2610 is coming up on 100 hrs. I seem to recall the fuel filter should be changed? Don't have the manual right in front of me. Anyone else do theirs at 100 hrs? Any Tips? Thanks

Can anyone tell me if you can rotate at 6' rear blade on the 2610 without removing from the 3pt? I'm looking at a Bush Hog 50-06. I need the swing offset to clean ditches without getting too close to the edge of the road:eek:

I changed both my Hydro and HST filters for the 50 hour service. I needed to top off the Hydro fluid afterwards. When I check the fluid level do I install the dipstick all the way back in or just set it on the filler opening. Right now I added fluid and took a reading with the dipstick...

I keep my ck2610 in an unheated pole barn. It's been very cold here for the past week or so. I thought I'd go out and start her up to see how she ran as this is the first winter I have this machine. I had no problem starting...a little smoke and some banging around not bad for how cold it's...

Just wondering if I would cause a warranty problem if I changed out my engine oil before the 50hr service?? I'd like to get Rotella T6 5w-40 in it before the real cold sets in. I have about 28 hrs. on it now and I'm sure there is 15w40 dino from the factory. I'd run the rotella T6 year...

Just wondering how anyone is running their hoses from the rear remote to the front of the loader for a grapple? I want to get one in the spring and would like to run the plumbing over the winter. Both my remotes are not detent. Thanks.:thumbsup:

I currently own a 2014 ck2510 hydro w/o the ssqa bucket. I have a little over 200 hrs. on the machine. I'm regretting not having a quick attach bucket as I would like to add a grapple to my machine. I did not think I would want/need one when I bought it...WRONG! I'm looking at about $2k to...

Having the sticking pedal issue with my CK2510. It has 139hrs on it. Have tried cleaning and lubing everything with some relief but dealer says he's had a few tractors that he had to replace the HST unit. Anyone else have this done and if so what where your results? I'm concerned that I might...

I am coming up on 100 hours on my CK2510. I changed all fluids at 50 hours. The owner's manual says to change engine oil/filter at 100 hours but I don't see anything for the next oil change? I'm guessing engine oil/filter changes are at 50 hour intervals? I'm using Royal Purple Diesel oil...

Can anyone tell me if I would be able to rotate a 72" rake on the CK2510? I'm looking at a Woods LR72 that is on sale for $650? Might be a little wider than I need but it seems like a hard deal to pass up? I do have a quick hitch on my tractor which I think might give me a little more room to...

Anyone know the proper torque spec of the 19mm an 17mm bolts that hold the loader frame mounts to the tractor. I just want to make sure they are not coming lose?

I had the pleasure of ordering a snow plow from Harry at Bxpanded. I have his Pirannah tooth bar and realy like it. I have to get back to him on the size blade I want as I'm not too sure which way to go? My tractor is a Kioti Ck2510 and is alittle under 51 inches wide at the rear tires...

Anyone using rotella T6 5w-40 year round? Im at 25 hrs on my ck2510 and would like to change over to synthetic. I'd like to get the original stuff out of the engine before the 50 hrs mark? I use rotella in just about everything I own. I'm concerned about warranty since the ck2510 manual...

Hi everyone, I'm going to be purchasing a 4 or 5 foot rotary mower. I have a Kioti CK2510 that has just a tick under 20hp at the PTO. I will be mowing 3 to 5 acres of mostly twistle and golden rod some thorn apple here and there. Anything over 11/2" I will remove with the FEL. Once I mow this...

I cant believe how tough this little tractor is. We keep it at the house we are building so I do not get to use it as much as I would like since we only are there on weekends. Trying to get close to 50 hours on it before it gets real cold to get synthetic oil at least in the motor. Only issue...

I have about 10 hours on my new 2510 and I'm going to grease the FEL. My dealer told me to use a moly type grease. My dealer and tractor are upstate so no kioti dealer close to where I live. I stopped in at a local Case dealer and bought a tube of moly grease to take back up this weekend. My...

Getting ready to take delivery on a new ck2510 with R4 tires. Will a 5 ft. Rear blade be big enough? I will be using it mostly for snow removal and material spreading. What is working for you guys.

Hi Everyone! Long time lurker. My wife and I will be getting a New Kioti CK2510 HST w/ FEL this coming Saturday. I want to purchase a few attachments but I'm not sure where to start when it comes to sizing? I'd like to get a rear blade for snow and grading our gravel driveway. Our drive is...