Search results

Would anyone be able to tell me if there should be slop at the point my finger is at. The problem i am having is when my brakes 5release 4x4 i will get a loud clunking back there this is a caseih 75c thanks

Hey guys i have a ih 424 utility my 3 point wont go down i pulled off cover below seat and found this item it is around 1 1/4 long has a small hole at one end large on other dont look like its broken would anyone know where it might go

Hi yall i have a 4x4 caseih 75c with cab. my question is when i am in 2wd and put on brake it turns on 4x4 if i am on a incline even a slight one it will disengage hard when i release brake kind of like the brakes stick and let lose. if i am on a level area it does it once in a while if i have...

Anyone know of a replacement rubber boot that would fit the tie rod in this pic case ih dont seem to sell just the boot and they want 190 for the tie rod you would think they could sell just that boot my tractor is a 75c thanks

looking for a service manual for my 2015 farmall 75c i can only find 2 75c efficeint power copyright 5-2014 and tier 4b final copyright 9-2018 which should i get anyone have a serive manual for one thanks

Hey all i have a IH 424 utility tractor and would like to put a set of remotes on it anyone know how i would go about doing it tia

Hi all i have a 2015 farmall 75c with 12 speed my range shifter with parking brake is a bi.ch to get in to park and alot of times the 1st and 2nd ranges i use it to feed hay and am in and out alot anyone else have this problem and found a cure thanks

Hello i bought some hyd oil in bulk in 55 gal steel barrel a couple months ago and never got around to changing it in my case ih 75c kind of forgot about it. its winter now and when its cold my tilt up on the loader sticks so im thinking about getting the oil change done. i heat my shop with a...

Hi everyone i have a question about the parking brake on a case ih 75c but im sure some other farmall series will be the same and possibly the same problem. depending on where i stop i am not able to put it in park or once in a while into 2nd range without moving it some anyone else have that...

Hello I have a case ih 75c and got a question about the glow plugs it is getting cold here and when i turn key on the glow plug light comes on and shuts off right away but i continue hearing a clicking noise for a little while is that still the glow plugs heating up? I know on my 7.3 diesel the...

Is there any reason to use a manufacturers ethylene glycol antifreeze over any other big difference in price

Hey all i have a case ih 75c and i am putting a new blow by filter in. has anyone else changed it and know if there is a certain way it goes in. it has no up or down on it so i am assuming it makes no difference but want to make sure thanks

Hi yall i have a case ih 75c and was wondering if anyone would know what amps the block heater draws want to put a timer on it and i have a bunch of 15 amp timers made in china laying around thanks

Does anyone add any additives to there diesel fuel got a tractor with 2600 hrs on her should i add something tha

2 identical tractors 1 has 2600 hours 1 has 1700 hours what are the hours worth?

Does your 4 cylinder diesel engine sound like the lifters are ratting when you first start it up not familiar with a 4 cyl diesel this is a caseih 75c

Just got a new to me 75c 4wd got a couple questions if anyone can help mine has a cab went out and mowed a little with it today it rides like a old lumber truck is that normal? It does have a short wheelbase and a cup holder that will spill your soda for you when traveling. haha #2 The pto...

Simple question maybe Is the ford 9n any good

Hi yall Im having hydraulic problems with a tractor i just got it is a ih 244. I took the cap and hyd filter out started the tractor and it sucked the fluid down but there wasnt any more coming in. I have a pressure guage hooked up and there is no pressure. Anyone out there have any ideas. Thanks

Howdy I just got a tractor that has a cross 2 lever control valve with pb. It has both return and pb going to hyd adapter block. Is that right ? The loader is slow and jerky plus my 3 point dont operate properly. Would anyone have any thoughts and possibly a drawing of where these hoses go. It...

hey yall. i have a murray tractor w/shift on go 6 speed and id like to make it a posi rearend. would anybody know what i need to do. thanks

Would anybody know what will cut thru a tempered mower blade. Ive got some real nice blades that the center hole is to smal. Ive went thru 2 bits so far. Thanks :confused:

Hey not sure if im in right place but here goes. I have 11.2x24 and 7-14 ag tires on my 4wd tractor and am thinking about r-4s for it. Would anyone know what size r-4 tires i will need to keep everything in sync. Thanks

Hi does anyone know if discount hyd hose has a tbn discount.

Hi Anyone ever here of these guys or florida hydraulics. Are they an alright company to buy from?

Does anyone out there know how to assemble the reusable hydraulic fittings. or know of a site where i can get a description of how to assemble. Thanks

Hi Guys. This morning i was going down my drive and i had put my loader on float. Then i noticed it started to raise on its own. Any ideas. The lever was engaged. Thanks :confused2:

Hi Everyone. I Have A IH 244 with a k3d engine it has 2000 hrs. runs good and i am wondering how long it will last. does anyone have any experience with these tractors and hours of it. thanks for the help. Rick

Hi Guys. Could Someone Tell Me If Any Of These Configurations Will Or Will Not Work.[ why] In Adding A Set Of Remotes To My Tractor. And Also Is 500# psi A Good Residual Pressure Thanks oh control valve in pic has its own relief.

HI guys. I have a small tractor that has a 4gpm pump. It has a bushhog loader on it. The hydraulic lines before the loader control valve are 3/8" and after are 1/4". The lines are all hose. Id like to replace the 1st 4 lines out of the control which varie in length to 3/8". The fittings...

Hi everyone im not sure if im in the right forum but it sounds good i have a bush hog 1840 loader it has 1/4 " hydraulic lines i dont know what the name of the fittings are to order new ones :confused: they have a flare on the male ends about the size of a 1/4" pipe nipple any help would be...

:confused2:hi everyone. i just got a 1982 ih 244 compact with 2000 hrs on k3d diesel. its dipping into the teens and my owners manual says to use 5w-20 or 5w-30 below 0 degrees. 10w oil below 32 degrees. and 30w above 32 degrees and not to substitute 10w-30 or 10w-40 i cant find 10w and id...

Hi All Just Wondering How Long You Guys Keep Your Block Heaters Plugged In I Have A International Tractor That I Just Got And Thought I Would Plug It In To Make Sure It Worked When I Plugged It In It Started To Make A Sizzling Sound Which I dont Know If Thats Normal Or Not But Appeared To Heat...

hello i have a international compact tractor 244 i put a new clutch in it today and the pedal goes to the floor and dont even start to engage clutch i replaced it because the old one did same thing but all old parts were satisfactory also are the tangs on the pressure plate pulled in after...

hi i just bought a 244 4wd i was driving and when i try to put in gear it would not go till i pushed clutch all the way down which is pto clutch so i figured id put in a new clutch when i removed old one it looked in good shape but it appeared to be installed wrong my question is which way the...

Hi i have a 17 hp kubota can i use a bush hog with this and how big can anyone help thanks rick

Hi anyone know anything about the 275 compact is it a decent tractor thanks

Hi everyone i am thinking abought buying a 275 it has 1600 hrs at 6000 dollars is this a good price and is it a good tractor its 4wd without a loader ag tires thanks rick

Hi again i have another guestion maybe yall can help with kohler 10 hp starts good timing dead on new carb kit it will idle than miss try giving gas it backfires and chokes thi is a pulling cub i have the gas tank is mounted in the front does the tank need to be above carb alot Thanks Rick

Hi Everyone i just bought a new regulator for my cub 149 i put the new one on and it started alright but when i shut it off the starter kept turning until i disconnected the bat wire at the regulator which gets hot all the wiring is correct ihooked it up to 2cubs and same thing any ideas...

these rims are for sale new never used takeoff from ct225 toct335 14" front 24 rear[/ATTACH]

Hi All i have a cih255 i just recently bought it has a mitsubishi 3cyl diesel it has 1100 hrs the lifters seem a little noiseir than other diesels i have adjusted but it did not seem to make much difference is the ticking just normal for a mitsubishi thanks for any help

hi yall i have 2 14x5 6 lug rims and 2 24" centers 6 lugs for sale that will fit ct 225 to ct 235 sell as package or seperate

is it alright to put 7-14 ag tires on 7" rims i have new ag tires to replace turf tires but i cant find 5" rims thx rick

HI anyone now where i can get 24" rear 6loop center rims for my mfd 255 case ih

Hi All i have a brand new set of tires and rims for bobcat 11.2x 24 and 7-14 for sale if interested.

Hi everyone would anybody know what a good price would be for a ci 255 w loader 1100 hours mfd i looking to buy thanks

Hi Everyone im thinking of buying a 1987 255 w/1000 hrs a 70a loader mfwd and turf tires is 7500 dollars a fair price ill use it mainly for pulling a brush hog and grading drive any help would be appreciated Rick

hi all can someone tell me the difference between a b series and a l series kubota thanks

HI IH GUYS IM LOOKING TO BUY A COMPACT TRACTOR I REALLY LIKE CASEIH AND WAS WONDERING WHAT YOUR THOUGHTS ARE LOOKING FOR A1980 OR NEWER 25 HP OR LOWER 3PT PTO NOT A SUBCOMPACT BUT SOMETHING WITH A LITTLE MORE WEIGHT THANKS AND ENJOY THE DAY ANY HELP APPRECIATED

HI ALL I AM THINKING OF BUYING A 244 W/ 1300 HRS AND WAS WONDERING YOUALL'S THOUGHT OF THIS TRACTOR IT HAS 4X4 ALSO THANKS