Search results

The ETL MCA radio on my LS MT573 suddenly quit working a few days ago - no FM, no Bluetooth, no phone, nothing. Below is a picture that the screen is frozen on. Has anyone else had this problem with their LS tractor radio? Any suggestions are welcome. Thanks much.

I would like to upgrade the speakers in my MT573 and would appreciate any advice from an owner who has done this. Looking at other threads regarding upgrading speakers in other LG tractors, it appears that the speakers are located in the cabin ceiling and are relatively easy to access...

Well, I'm taking the plunge. Today I visited the LS dealer nearest to me and checked out the MT57 and like it very much. I asked the salesman a number of questions and carefully inspected the cab interior, the seat would not go back a distance that is comfortable for me but the salesman said...

In shopping for a new tractor, I, like moat, must have one that will operate specific pieces of equipment. I am replacing a 1985 Ford 340B (inherited from family business) industrial tractor which has a quick attach skid steer compatible front end loader. The front end loader is fitted with...

Does a 55 or 60 Hp "NX" Series Have More Standard Features Than a 45 or 50 Hp ​I am seriously researching the purchase of a NX series Kioti and would like to know if the 55 or 60 Hp models have more featurrs or goodies than the 45 - 50 Hp models. Any information is appreciated.

I currently have a Ford 4610 (63 hp) and a Ford 309B/Industrial (50 hp) and would like to trade the 309B for a newer, more modern tractor. Although the 309B has a FEL on which I have installed a quick-attach device and I have forks, grapple and bucket, I need a backhoe. I also have a Hardee...

Hello, I need to reseed some hay fields that were originally seeded about four years ago and need some opinions on the best procedure. These were newly cultivated fields in which we did not get a good stand of fescue. My first thought was to go over them with a disc harrow to loosen the soil...

Well, I thought I finally had my 4610 in good running condition ( prior history: Burned Valve, Piston Issue), but a new problem developed this week. I was mowing with a rotary cutter and thought I had run out of fuel - the fuel gauge is not very reliable and I should have fueled up before...

Hi all! I have a Ford 340B industrial tractor and would like to install a quick attach adapter and grapple and later a set of forks. It is not difficult to find threads on TBN discussing quick attach adapters and grapples for compact tractors, however, I have not seen many threads discussing...

Hi everyone! I have a John Deere 640 Hay Rake that operates fine, but I have a question regarding maintenance. We have greased all fittings but do not know how to check the gear box lubricant. How do we check if the level is correct and what type of lubricant is used? Also, if we take the...

I posted this, Leaking Remote, to the Owing\Operating Forum not realizing the Hydraulics Forum. Is this a major issue?? I will be more careful with my next post!:confused2: Thanks.

Hi everyone! Well, here I am again with another crazy problem on my Ford 4610. For some time I have noticed a slow fluid leak at the coupling on one of my hydraulic remotes. We thought it could be a defective quick-connect coupling and removed the coupling, it continued to slowly leak. I...

Hi everyone! My new 1198W Hardee Rotary Cutter was delivered last week and I need some advice on how to make initial set-up adjustments. I am using it on a Ford 4610 and understand it needs to leveled using the tractor's third arm. I am not sure how to determine the correct height of the two...

Hi everyone! This may sound crazy and I feel some of you can set me straight on this: Yesterday I was talking with a friend who operates diesel equipment in his business and he told me he uses transmission fluid as an additive in his diesel fuel. He said that low sulfur diesel fuel does not...

Hi everyone . . . I need new rear ag tires (16.9 x 30) for my Ford 4610. Are radials better than bias for primarily agriculture use? I have not talked with my local tire dealer and wanted some info before going to the tire store. Thanks to all!

What I thought would be a simple fix has turned out to be something of a challenge. I need to replace the Flasher Switch in the rear light of my Ford 4610. I bought the switch at my local New Holland dealer and looking at the attached diagram thought it would be easy. The problem is removing...

In working on my Ford 4610 today (Reference this thread) we found that it has Headland pistons rather than Standard pistons. A ring kit for Headland pistons costs almost three times the cost of standard ring kits - a kit is for only one piston. The technician told me a new standard piston with...

My brother and I are shopping for a log splitter - the one our dad bought over 20 years ago from Northern Equipment was stolen this summer. We are looking at the 22 ton Huskee from TSC and the 27 ton Troy-Bilt from Lowes. The Huskee splitter is highly recommended by other TBN members and is...

A couple of months ago I bought what I believe to be around a 1988 - 1990 (still have not located s/n) Ford 4610. Both my brother and I took it for a test spin and did not notice any problems with the engine; it sounded good to us. When the tractor was delivered and I hooked it up a my...

I bought a Ford 4610 last week and am having trouble locating the serial number. The tractor has been repainted and the ID plate on the inside of the hood is missing. Per TractorData.com and a local New Holland dealer the number should be stamped on the front right transmission cover. Below...

Hi everyone! I am in the market for a good used tractor in the sub $10,000 range to use primarily for haying and bush hogging. I went this afternoon (Sunday is a good time to look - no salesmen) to our local used ag equipment lot and found several interesting tractors. Of the Fords, New...

I found a nice looking JD 2640 on Craigslist with the following description: I have not seen the tractor in person, but talked with the seller today. He explained that the engine is not new, but was rebuilt because of a noise made by the counter balance shaft. While they were in the engine...

Please bear with me: Here we go with another "which is best?" post:confused: I need a post hole digger for a Ford 340B (48 HP PTO) to plant 6 x 6 posts for a new equipment shed and am looking at the following (with a 9" auger): Leinbach L7200 Leinbach L7300 CountyLine (TSC) Post Hole Digger...

We have some property that we have cleared and need a landscape rake to rid it of rocks and misc. trash. The rake will be used on a Ford 340B industrial tractor with approximately 50 hp. The rakes we are considering are the ABI LR72, the Linebach RR-6, and the ETALR-72. These seem to be...

Hi all! I have a 1985 Ford 340B (s\n C743904) and am having trouble with the temperature gauge. When I first start the tractor the gauge appears to be working, but as the engine warms up the indicator disappears into the low temp. zone. I am not sure if the problem is with the gauge or the...

I am shopping for a canopy for my tractor and ran across the Farm Hand brand mfg. by Agri Works USA in Oklahoma. Their site: Tractor Canopy, Tractor Canopies,Tractor Sun Shade,Mower Canopies,ROPS Canopies,Factory Direct Canopies. They are made of 1/4" thick Polyethylene with a 12 gauge...

The Ratchet Rake was a hot topic on TBN for quite a while and I became interested in this device. However, I have not seen much discussion in several weeks. Is everyone who bought one still happy with their purchase? I am very close to buying one (72" model) for my Ford 340B with a 67" bucket...

Stupid mistake! Yesterday I was adding fluid to the power steering of my 340B and by mistake used 90wt gear oil rather than 303 hydraulic fluid. What is the best way to drain the power steering system? I added approx. 12 ounces of gear oil. Thanks.

I bought this tedder last week from a local used tractor\equipment dealer. It could use a new paint job, but appears to be okay mechanically. I have not located any markings indicating who the manufacturer is. Can anyone ID who made this tedder? Thanks!

Hi everyone! I am looking at a JD Model 640 Hay Rake that appears to be in great condition. It is freshly painted, has all tines and appears to be mechanically sound. The seller is asking $1600 and I'm going to offer him $1200. We normally mow approx. 20 acres of hay. Any opinions on this rake...

Hi everyone! I am looking at this box scrape, 672 DHD, to use on a Ford 340B Industrial Tractor. Is it okay or is it too much for my tractor? Also, any opinions on this scraper? Thanks!