Search results

I’m looking for feedback on discbines / mower / conditioners. I have used a new idea 5209 for the last 15 years and I’m thinking about trading in for a new machine. New Holland and John Deere both about an hour away. Kubota, Massey and Kuhn as well. Need 9-10 foot cut and rubber rollers. Thanks

I wanted to see if anyone had any advice or experience in replacing a 3 spool valve with a 4 spool valve? I have a 2007 cab 4720 and seem to have plenty of room to remove the current 3 spool valve and add a 4 spool valve like this one (FPS 41398 L239 4 Position Manual Hydraulic Spool Valve...

Can anyone recommend a good seeder that will seed in tilled ground and also oversees existing meadows? I can get a used Woods PSS72 or a Landpride APS1572 for around $5k. Both seem to be the same machine. Are they worth the money? Have found a JD OS 1058 overseeder. Also looked at some more...

Does anyone know why my rpm is limited in cold weather? Last week temps were in low teens and tractor would not go above 1500 RPM for almost 20 minutes. After that it went to 2000 rpm.

Looking to upgrade to either a T5070 or a T4-110. The T5070 is a 2012 with 400 hours, T4-110 has 300 hours on it, 2016 model. Both are priced the same. I like the fact that the 5070 is pre TIER 4. Other than that, is there much difference? I'm just not that familiar with the T5070, I have...

Seems I have a significant leak under my TC45D tractor. Upon examination it is coming from where the rear end of the tractor bolts up to the transmission. it is definitely coming out of the bottom. Sides and top are dry. Attached is a picture of the puddle it has made in 48 hours. Any way...

I recently purchased a 2001 TC45 with 950 hours. It was in need of some Basic repair. The tilt steering would not work but fixed with a new gas shock. The other two issues were the hydro wants to creep in the forward position and the platform was in need of replacement. The tractor ran fine and...

Looking for suggestions on a quality net wrap for a NH BR7060 baler I recently purchased. What brand and best place to get it?? Rural king has Bale Lok brand and Agrisupply has Tama wrap. NH dealer of course but much higher cost.

Anyone have any advice on adjusting the parking brake on my 4720? I can pull mine all the way up very easy and tops out It holds ok but really needs a little more I think. Do I have to pull the rear tire?

I have a 2013 JD 4720 with the factory 3rd SCV kit. It has the pistol grip handle with the membrane switches. The vertical switches control the SCV but there is also a small third switch that I understand can be used to control a diverter. I took the handle and switch apart and found that the...

I wanted to see how others were securing their hydraulic connections... I had the lower threaded connection on my QC female for the power beyond vibrate loose?? Not sure why it came loose but it did and fluid started flowing out at a fairly high rate. Probably lost a gallon before stopping...

Hopefully someone has an answer to what might be happening. Today as I am working my box blade with my 2013 JD 4720 tractor, the 3rd scv sticks and runs the top link all the way out. You can hear the pump bypassing. I have tried working the rocker switch on the console as well as the control...

Does anyone know or have any experience in dealing with Leid View tractor company? They have a significant inventory of late model JD tractors but are not a dealer. They have a couple of tractors I am interested in but want to get involved if they are not a solid business. Any experience anyone?

Does anyone know what the serial number range is for the creep to reposition feature for the 4720 tractor? From what I can find, it is a feature that added somewhere in 2011. When I look it up, it says to check literature for serial number sequence as to when it was introduced but I cannot find...

I Have had a 3 series tractor for about 10 years now, first a 3320 and later trading up to a 3720. I really like the 3720 but lately have really been thinking about getting into a bigger frame. I do a lot of hillside mowing and use a PTO wood chipper so the extra HP could be useful. Would also...

Would anyone take a couple of pictures of the spring mechanism on the fuel door? Brought mine back from the dealer and now it doesn't work properly. The spring is dangling loosely and I can't figure out how to set it back. Looked online at the parts manual but no help there. As they say a...

All of the sudden I can't seem to get our 3720 to crank. We have plugged the block heater in for several hours (overnight) and temps are in the low 20's now but when I turn the switch, nothing happens. The glow plug indicator comes on and stays on along with the warning light (! light). You...

I have a 2008 JD 3720 and have been getting the Error Code 57 for a couple of months now. It is random and doesn't seem to effect the operation of the tractor, at least until this week. Yesterday I tried to start when it was really cold. Plugged the heater in for a couple of hours and let the...

I know there have been a couple of threads on this topic in the past, but I needs some advice on the best PTO Chipper. I will doing various chipping tasks with it and want one that can chip the small stuff up to 6" and that will last over time. Will not be using it everyday of course, but I...

How much should cost difference should there be between a JD 3320 and a 3720? I really like my 3320 but need more hp for mowing think grass up hills and a few other jobs. Has there been any know issues with the 3720? Final question, what is the best match that New Holland and Kubota have to...