Search results

i have some manuals for a 324 if that would help?

so i am not seeing any damage to tree trunks, or much to the garden, just the holes and tunnels. so moles? or squirrels? maybe voles, but if it is a mole that would explain why the mouse bait does nothing. So i will pick up some mole traps and see if i can trap something. and if i can find a...

The holes are about the size of a golf ball. They are plugged up down an inch or so. No dirt on the surface like a mole. I can not see a tunnel move like I see in the clips on line. But they collapse under you when you walk over them.

So if it is a mouse or a vole mouse bait and traps should work. There is no mound around the hole at all. Any ideas on what to try? I have tried just one bite, and snap traps with peanut butter. Thanks

So I have tried putting out grains and peanut butter that is supposed to draw voles and mice and squirrels. Have not have anything taken. I will try again. They seem to dig all over the yard and garden but as far as I can tell they are not eating anything in the garden? Or maybe I can't tell...

These are all over and some are connected by tunnels. Some I am not sure of. We have had a few wasps but nothing like in the past I do live in the northwest and in the trees. So I could see a squirrel but I have not seen any of those but pretty sure they are here. Maybe they plant dandelions?

I have also baited for mice

What's in my yard and how do I get rid of it. There is no mound like a mole have not seen anything and the sonic vibration things have done nothing. Thanks

Thank you. The cap never came loose. Just the connecting bolts came loose. I think I will spray it heavy with electric contact cleaner and see what happens I do not know of anywhere to get parts for this. So trying to not ruin anything.

I do not have glow plugs. And the starter always clicks. I have to jump the 2 large terminals. Anyone have any idea how to get this apart

Thanks for the help I did jump the two large terminals on the starter and it started. So I used the original battery and cables. I did not jump the small one to the one from the battery. Is that what I need to check next? A few years ago I bypassed the neutral interlocks on this due to the same...

I have a Rhino 324 tractor. Started fine this winter. Now I hit the key and it just clicks. If I jump the 2 large terminals on the starter it starts right up. Any help or ideas on how to get it to start with the key again? Thanks

Has to cut my spare tire cable on the side of the road. Junk yard for one without a key for $20. I also run trail finder a/t from discount tire on my f150 and expedition.

Here are some photos of my driveway

We missed it. It was between us and Battle Ground. Thanks for asking. I am working on moving some dirt to make ditches again. I thought that dragging the dirt onto the road would be good and need the rain to pack and set? But that sounds like I need to do that in the summer. I will get some...

So I live on a steep hill in the Pacific northwest. The recent rain has washed ruts in the road and the gravel down the hill. Before I have just pulled the gravel back up the hill filling it in with the box blade. I noticed this year that the road is now looking lower than the surrounding...

That splice slid into the end no problem. It has two screws on the top that clamp each side of the rail into it. Worked great. I should have got a picture of it installed. Thanks for the information about the door width. I had a hard time getting the holes in the top of the door for the...

found this connection at the local farm store.

I believe that valve controls the drop rate of your 3pt. Hitch?

Sorry I put this in the Wong place it can be moved

I and putting in the door on my pole barn. I have the round track. How do I join the two pieces of track together? How much larger should the door be than the opening? Thanks

I have a rino 324 tractor, it has been good to me, used to get my parts from FarmBoys tractor. I can not find them listed anywhere. Anyone know if they are in business, or anyone else that would sell parts for this. Thanks

I have a old Howse brush mower. I broke the drive shaft, How do I figure out the correct shaft to buy to replace it? I do not know the model number of the mower. it is about 5 feet across. Thanks Doug

I did not see an adjustment, Is this drawing the same from this other post? if so which part? http://www.tractorbynet.com/forums/files/john-deere-owning-operating/441824d1443214840-4310-rockshaft-repair-filter-replacement-rockshaft-parts-diagram-jpg

I have a friend about 80 with a 4200. I do not know anything about a john deere tractor. The rear hydraulics will not lift any more. The loader is sluggish, He says that last year the rear would lift and not stay up, so he just kept using it that way. After looking I think, or hope for him...

I have not found this issue in my searching, so maybe someone can help me. I have a John Deere 102 riding mower. It has been an ok mower But the last few times I have used it, the belt is comming off of the pulley on the engine, when disengaging the mower. Runs fine, and the pulleys on the deck...

sso I was checking the tractor today, found the oil to be milky in the transmission, So I thought it is time to change it all. But what do I use? Manual says n100 lubricatiog oil for hydraulic systems, does that mean to use hydraulic oil in the tran, 4wd unit, and the lift system? That just...

I have a metal pole barn, standard build with the poles, 2X6 from pole to pole, and then covered with metal. I have a desire to cover the interior with plywood, to make it a little more pleasant. But if I just cover the 2X6 with plywood, then I will have a huge mouse issue behind the plywood...

I Have a Rino 324, it is now running great! thankst to everyone here, Now I have to fix my steering issue. It has manual steering and the sheel turns about 3/4 to a turn before moving the wheels. Trying to adjust the box only made it worse. A new box is over $300. and not really in the...

I have a howes 5 foot brush hog mower. I have used it for years with no issues. Last year I broke the shear bolt when hitting a rock. I have since replaced the bolt almost every time I use it. What do I need to check? mower turns fine by hand, and gear box is full of oil. Could the bolt have...

When I was having hard starting issues, I know I overheated the starter, more than once. Now after getting the engine back together, the starter turns the engine over slowly and at a varying speed. Like there is a power issue. I am assuming this is because I overheated the starter in the past...

This tractor has never idled at minimum throttle. I have to have it about 1/8 of the way open. but seems to run fine. Also there is no fuel in the return lines from the top of the injectors. So how do I fix this? or does it matter? The return lines on top of the injectors that do not have any...

So I got this back together after changing the liners and the piston rings. now when it fires I get smoke out of the exhaust, and intake both. I did have the head machined. So I am going to try and find a spec on the valve clearance, and do that, what are the chances I bent a valve? This is...

So I have this tractor apart now, one set of rings is stuck. So I am going to remove and replace them. How do I get the carbon out of the grooves? using a broken ring is not doing much. do I also need to clean it from the piston, or just leave it? thanks Doug

so I have this 324 Rhino tractor, It has been pretty good to me, and I can not afford to replace it anyway. So I have changed the head gasket about 2 years ago, and now it struggles to start. So now I am going to pull the pistons and change the rings. But I have water in the oil. just recently...

I have a snow blower, and it is picking up a lot of rocks. If I tilt it back more it just pushes the snow. What am I missing here? Also when the snow starts to melt, or it rains on top of the snow, it just clogs it up with ice in the chute. Anything to do on that? or just go back to the blade...

I have the Rhino 324, and the alt. does not charge, I would like to remove the regulator and install an old GM alt. I thought I had seen a procedure to do this somewhere, now I can not find it. Anyone know how to do this, and can help me out. Thanks Doug

I have a rhino 324, but the question is kind of generic. I have the clutch ready to go back in, but how do I align the disks. I can use the PTO shaft that goes into the bushing at the back of the engine to align the PTO disk. But how do I align the drive disk? All of the generic tools I have...

I purchased a quick hitch from harbor freight, and it will not fit into my box scraper. The Box is a Cammond, that I got from a JD dealer many years ago. The hitch is 27 1/2. Anyone have one similar and can let me know if it is the hitch or the Box that is the issue, and how would you fix it...

I have a Rino 324. Love the tractor. About a year ago it developed a starting issue in the cold and snow. So I used a little starting fluid on it, an have had to since then. I know it is not preferred. but I needed the tractor to move snow. I then replaced the injectors. it has gotten slowly...