Search results

How do I know which publication will cover updates in an owners manual for my year of manufacture ( 1997 ). I am aware parts are ordered by serial number in many instances. I want to make sure I am getting the updated information. Thanks

Currently looking to purchase a mower for attachment to a 955. Actually found four within a hundred miles. Some are without attaching hardware, others stored outside in the rain and snow. I did find a 72" from a 4700 that is in very good condition, stored inside, used only several years. I...

Having purchased a like new 955 with a loader I would like to add a 72" mid mount mower. Are there specific models that fit this series ? My 4110 needed a specific model for clearance of the gearbox when raised. Is it a generic mower with perhaps several mount choices ? Would like to locate...

Just acquired a 955 Deere with a 70A loader. It has the old style bolt on mount. As I prefer the quick change system I have on another tractor.... I was wondering if anyone modified or bought components to change.

No mention of the 55 in current sales promotions. Is it still available ? I know through out the years they drop accesories ( like the draft control ) to keep the price in line with other manufacturers. Did they remove the engine option ( turbo ) due to price or repair problems ? I believe...

Well I certainly have lost confidence in Mike and certainly will never read another printed word he writes. I am glad I searched other forums before sending a check. AND he says other people are trying to get the best of him ???? He is not accepting private messages. Maybe, just maybe...

Craigslist had a local person with a 53" Kubota two stage snowblower that was converted to 400 JD series specs. for $225.00 It looked like it was only used a couple years as 95% of the paintwas still on it. I called within the first two hours of posting and wouldn't you know someone 150 miles...

Anyone have dump trailer plans for a 10-12 foot model ? I have been collecting parts for a build. I have ten pieces of ten foot five inch channel ( nice hd pieces ) and two Dexter 8k brake axels with springs and eight bolt hubs. A local custom metal shop will bend up 12' 1/8" sheet metal (...

I would feel better spending the kings ransom on a machine that had a front pto drive system that could be used with a lawn mower. Can you imagine cutting the grass in air conditioned comfort surrounded by surround sound and a cup holder ? I just can't convince myself its worth 20k to drive...

I have been contemplating the purchase of a 6' pto three point mower to be used with my 4110. I'm wondering if the pto with the electric control will work properly as it snaps on so fast there is alot of blades to get in motion. Don't need a thousand dollar parts bill if the system will not...

6+ acres of lawn. Takes too long and need something to cut the time down a little. Anyone recommend a larger brand that isn't in the six figure catagory. Would prefer to stick to a PTO / three point version.

I have an acre pond 12' deep that I would like to aereate. The pond is 800 feet plus from my shop and there is no electricity there. My plan is to bury a 1" black plastic pipe ( I have alot of it on hand ) to the shop and use an oil less compressor to supply the oxygen. I would like to find a...

Is it a case of who did they copy, who builds it and they put their name on it , or they actually did some homework and saw a need for this segment of the industry ? The new 1100 Kubota lists for 17+k. Thats alot of money for a pipe frame, diesel engine, cab, and a utility box. Dealer...

Found this at a garage sale. Owner had a kubota and apparently had second thoughts of making the mounting hardware to fit his tractor. Made some simple brackets from the free steel rack and it fit just fine. Now I can sell the floppy hat... I hate wearing them in the sun anyway.

270 TL Loader steel line that supplies oil to the left lift cylinder was damaged. Wanting to keep the loader like new without any visible blemishes I check with a local dealer for a replacement. I was quoted over $ 550.00 for a single tube 1/2" line. They checked the price twice and this is...

I see where a Ford 1300 was listed on an auction bill. It stated good condition ( Loader I believe also ) with mechanical problem, a broken crankshaft. I didn't even bother to go to see if someone buried themselves in this thing. I'm betting someone would go 12-1500 thinking it would be an...

I heard they parted ways. Are they still using a series of Yanmar or did they develop an engine on their own. I haven't been to the dealership in a while. I know they will talk me into switching for the latest expensive toy.

I have followed the story about John Deere and Yanmar parting ways. Is cub using them in all models of diesels ? Cummins is selling the Dodge truck platform. Without them I think they would be back in bankrupsy court.

Went to move my 55 from the garage to get a truck out and found it would shut off when you put it in gear. Checked all the linkages, peeded at the repair manual, totally confused. Called the service department and they related it is the seat switch as they have had a ton of them fail. We...

I have just purchased an Easy Vac trailer lawn vacuum system with an eight horse Briggs engine. The hoses are deteriated, very light weight, and require replacement. Anyone have experience on a particular brand that would hold up for years to come ? Any wall thickness I should be aware of or...

I have several in my shop but the biggest concern is they leak down in a year or so out of the useful gauge area. I wish someone would make one that could be refilled and repressurized your shop by a valve stem type device. The ones ( kidde ) that weigh about fifteen pounds are preferred as...

Will the Deere float you ask ? Here is living proof from the grounds of a correctional institution in Wisconsin. They were careful not to get the loader wet.

Looking at two used RTV 900s 1. 2007 with 700 hours, windshield, hydraulic dump, bumper, $8750.00 2. 2005 with 2000 hours hydraulic dump, bumper, box liner, $6000.00 Both appear to be in good condition. Are there any major improvements between 05 and 07 ? Is 2000 hours on a Kubota diesel a...

Found this jewel at the salvage yard. Needs a little TLC, and a couple 7' cutting blades. Now to check the township for used snow plow cutting edges. For a hundred dollars its a good start on a rear blade to maintain the trails in the woods. By the bend in the frame it was behind some serious...

I'm kicking the idea around of building a leaf vac system using my JDs pto. It turns 540... if I can use a pulley system maybe I can get the speed up to 2 1/2 times this amount. I have a 16" rotar with 3" fins and a steel case ready to use. Any idea what the tip speed should be to get enough...

I'm in the market for a 12' dump trailer with a 12k capacity. Most have a 10 gage floor and double braking axles.. Frame sizes vary as well as a single ram and double ram models. Some make them with 4" drop axles for lower ground clearance, power up / down and powder coating. Prices vary...

Will have the tower painted and ready shortly. The 1929 Sears motor and fan are ready to go. Probably the only safe way to get it in the air may be hiring a crane ( 3-4 hundred minimum or more ). No sky hook in sight.

My cold blooded 4110 needs a shot with the glow plugs even when it is seventy degrees. Without them it will start after turning over about 10 times and expell some black clouds of smoke. If I place the machine in gear, turn the key all the way to the right for 6-9 seconds, release the key...

I stopped at a rather large Kubota dealership Saturday to look at a 1100. Sales person said they don't stock them due to a selling price of 18k. They have a 900 on order ( no new ones on the lot ) that should be in within a couple weeks. They had a used 900 or it could be a consignment, with...

Most all the fuel containers I have do not have a fine mesh strainer in the pouring outlet. Both tractors have the same size fuel cap for the tank. I was wondering if anyone made a cylinder shape screen that would fit in the tank and final filter the fuel intake. I have looked for fine brass...

I have to get my priorities in line and come up with a bagging system for the 4110. The pine needles are winning the battle and am tired of raking them by hand. After I finish another batch seems to fall from the sky. I have looked at cyclone rakes and pull behind units. I would like a system...

One of the projects I started this cold winter is almost finished ( except for the paint ). It turned out better than expected and under budget. It reaches a bit over 8' and reacts faster on the hydraulic side than anticipated. Haven't attached the weight box as it is being used on the box...

I'm looking for a metric 2112 yoke ( PTO joint ) that will connect to a standard tractor pto shaft with a push button or collar release. Must be unusual because I have been to three suppliers and no one stocks them. Also need a M 2100 cross joint. Also thinking about going with a complete...

Thinking about constructing a pulp trailer with a loading boom. Anyone know where a hydraulic swival could be purchased to operate a clam ? I have seen a unit made in Canada that is pretty compact. A new one may be quite costly depending on size and capacity.

I have a Woods 72" box blade which works great with one exception. When I put the ripper teeth down there isn't enough weight to keep the teeth in the ground. I was thinking about a 2' x 2' steel detachable box mounted in the center to give it the extra incentive to stay where it is needed...

I bought a used canopy from a 855 that looks almost new except for a small damaged area in the rear ( 1 1/2" x 2" ). I thought they were fiberglass but I see it is sheet molded plastic. Looks like a tree branch hit it and was surprised to see the total thickness is less than 1/16". The owner...

I'm building loader mounts on my JD and they have to be tacked in place to be in the correct position. I took the battery out ( needed cleaning anyway ) and was wondering if anything else electrical should be disconnected. I don't like doing this but I didn't see an alternative.

I'm thinking of going with a double set of rear wheel weights on the TC 55. Anyone have them and did they make a big difference ? I still want to be able to use the 3 point and mount the backhoe without filling the tires with fluid.

I'm starting to build a loader for the 4110. Could anyone get a measurement from the back verticle side of the bucket to the front tractor frame when the bucket is resting on the ground ? I want to keep it as close to the tractor as possible for better steering control. Also total length of...

Anyone have a source for fuel filters for New Holland and John Deere compact tractors ? A 3" paper fuel filter for a NH is ten dollars with tax at the dealer. A similar sized Fram is only $2.59. The correct Wix filter is twelve dollars. The parts store sales person states their filters are...

I bought a new old stock 1996 Finn ( ATI manufactured ) power rock rake. The only revision I want to make is it is fixed at 15 degrees to the left by the bolted on hitch assembly. As the mount is welded to the frame I torched the long angle brackets off, ground the base smooth and engineered a...

I have access to a nice Ford 1200 other than the fact the engine needs a crankshaft. Nice factory loader, rear axle, front drive axle, wheels, sheet metal, transmission, 3 point. Would take offer on the complete unit.

Anyone own a JD flail mower, 6' from the late 70s to mid 80s ? I'm trying to match the angle gear drive. If possible I would like a photo, ( of the angle gear box ) if a brand name is available, and the ratio of increase the drive provides. The JD parts photos aren't very helpful and if...

Stopped at the JD store to check if any additional mufflers were available for my tractor. They suggested trying a new muffler ( cost $280.00 ) non refundable if it isn't quieter I might add. I have 120 hours on the machine so it can't be worn out. It just has such a sharp sound to it without...

I'm in the market ( to build or buy ) a pto power rake similar to a Harley rake. I have rented one and they seem to do an amazing job. At 150 a day for all the use I have I would like to park one in my garage. I recently looked at a Nortec Piranha. It has 2" x 1 3/4" x 1/2" sabre tooth...

Every time I come to this site I have to re log in. I left the site for 5 minutes and returned only to find I had to log in again. Is this something new or is my sign in screwed up ?

My 60" MMM for the 4110 has an open center location on the top side . All the grass clippings fall in here and when washed out tend to knit together as they can not be flushed from the low spots. While preparing the mower for its winter nap I made a card board template for a third cover to...

Don't know why but I always wanted a large frame Bolens tractor from the 70s. They were massive compared to others with many heavy duty features. I have been looking in Wisconsin but haven't come across any good prospects as of yet. Does anyone have a location of one for sale ? Thanks

I want to start gathering materials for construction of a front end loader for a 4110 John Deere. I am thinking 2" x 3" by 1/4" steel tubing for the arms and 1/8" plate for the 54" bucket. 3/8" plate for reinforcing where the rams attach and 1- 1/4" pins. Will the 2x3 tubing be strong enough...

Recently I have read of disappointed owners indicating their yanmar diesels took too much fuel for daily tasks. With this in mind I filled my 4110 with fuel and used it for mowing grass only at PTO speed using high range for a majority of the time. It takes three plus hours for one trip around...

My 4110 is a great machine but it just makes too much noise. I have to wear hearing protection while it runs. Has anyone replaced the standard muffler with a quieter version ? My 55hp New Holland is less than half the noise. I like being able to hear without muffs covering my ears. Any...

Looked at the RTVs, gators, rangers, ect and noticed a quite alot of money for the machines. No doubt alot of engineering and aluminun castings ( which in themselves are quite pricey ) are involved. Need something to check the back forty and a couple stream crossings. Ended up with a 94 Jeep...

I was mowing at 1500 rpm with the 60" mmm and noted it wasn't exactly a clean cut after mowing about 3 acres ( have about 5 ). Not to keen on changing the blades in the middle of the lawn cutting. I read in the manual it should be run at full speed ( about 2700 ) . I tried this for one...

I recently found a 4 year old 210 John Deere loader that was never used. The guy bought it in a package deal with a 2210 tractor, snow blower, mid mounted mower, and a Curtis cab. He would sell the loader but has not set a price. I believe this would fit my 4110 as his tractor frame size is...

As you can see by the picture you can mix and match. Must admit this is a strange combination. Saw this tractor for sale and had to post it.

New Holland recently came out with a 60 hp version of the boomer. Does anyone know where they got the extra 5 hp ? I have read the engine from the 45 is the same as the 55, only with the addition of the turbo. I am wondering if the up'd the operating speed and maybe more fuel flow to get the...

To Welch Queenland LLC for 7.1 million. Another fine company headed across the open sea. At least we still can deliver pizzas.

I can't seem to keep up with the numbering system Deere uses. It seems every couple years they change the model numbers and maybe the hood style. What is camparable to the 4110 series in weight and power ? I notice alot more machines are gear drive. Are they cutting costs to make them appear...

The tractor is great. The mower attachment sucks. Not only is it hard to get on / off it only raises about 3". When leaving it on for other tasks I have to be so careful not to drag the mower through a low spot. I was toying with the idea of mounting it ahead of the front wheels. Had I known...

A relative has a new HPX and it seems to work out well for the farm applications. He has noticed when checking the oil the level is higher and a sample smells alot like gas. The plugs foul out and require changing often. This has happened several times and I'm sure it is not good for the...

Stopped at the JD dealer yesterday to check out a ZTR. The cheapest version they have with a Yanmar diesel lists for $16,000. Needless to say a bit more than I wanted to pay. They had other versions with Kawasaki engines but I'm not impressed with them. The green paint is very expensive.

Anyone fashion a post hole digger out of a axle ? I'm thinking of using the front drive axle out of an S-10 for the right angle drive. Add some square tubing for bracing and left over pto shaft. Main purpose would be for planting bare root trees so a 16-24" auger could be purchased or fabricated.

Even in the summer heat the three seconds on the glow plug timer isn't enough for an instant strat. Anyone have a clue how to extend the timer to about eight to ten seconds?

I have narrowed the search for a wood chipper and I believe the best chipper for the price is the BX-62. From what I gather the retail list price is $2850. Not including shipping and tax.... anyone get a better price ? Thanks jr

The mid mount mower on my 4110 ( 60" ) only raises approximately 2 inches for a travel height. Are there more adjustments I am missing ? There is not alot of room under the frame for the linkage.

Does anyone have any info on the mulching pannel that you can place under the 62" deck ? Haven't priced them but if they work well it might be a worth while attachment. Would you have to remove it if you planned on bagging the pine needles in fall? I have never seen one work... only pictures.

I understand the need for safety as well as a reminder now and then. If you leave the seat of the 55 while it is running and not set the brake a loud beeping sound will continue until it is set. Usually I remember and it is no big problem. Now that I have a backhoe mounted on the tractor and...

Came across a nice used Yamaha atv. Anyone have any experience with this brand ? It won't get used alot, just running into the woods. Can't justify a new one at the current prices but this one is pretty reasonable.

Looked at the above chipper this weekend. Where do they get $6000. for this machine consisting of a sheet metal cabinet, pto shaft, chute, cast wheel with four cutters and a bearing to hold it in place. I was amazed how compact and light the unit was. They must have alot of liability...

I have been looking around for 3 steel caster wheels that swival and are rated for at least #800 pounds. The backhoe, frame, and dolly will tip the scales at approximately 2100 #. Checked harbor freight, only rubber tires that I'm sure would not withstand the load for long periods of time...

I have a three point frame and the pto drive hose from a farm trac brand unit. The hopper and spreading plate have rusted out. I was thinking of finding a milk can for the hopper and making a heavy duty spreading plate. Some type of plastic insert on the interior could act as a funnel to...

Have a 4110 with the mid mounted 60" mower. When I first used it the top belt covers rattled when cutting grass. Called the dealer... he stated the covers should not be fastened down and the bolts sticking through the covers were just guides. Called JD customer service. They told me the same...

Local dealer stated there was no available mount for the 611 to the New Holland TC 55. A lighter series bracket would fit but not reccomended. I had some flat steel sheared and bent for the back hoe mount. The tractor mount used flat and 2" x 4" tube steel. I tried it out today and it passed...

I like the unit specs but I am curious about the total unit weight ( 630# ) Other makes seem to be a bit heavier and have a lighter flywheel. This is taken from what I read on line. Can anyone who has used one of these machines give a product report on features, problems, service, and if they...

Would like to build a 5' core aerator . Anyone know where the steel plug shells could be purchased ? I know they are cone shaped, thin and very durable. I would be covering 5-6 acres. If I can't find the shells I may weld some 1/2" rods to a section of well casing. I like the core idea best.

I see where the jimna site indicates they have an 8" model for $2300. It weighs a couple hundred pounds more and details are sketchy but it might have a four blade flywheel. When I find a stocking dealer I will give it a close inspection. I'm not sure but I think it has an assisted feed...

There is a 1998 Kubota 3610 for sale locally. It has 200 hours, loader, cab,snow blower, and mower. Can anyone give a ball park figure on what an average price for this equipment ? Thanks jr.

My friend also has a new TC 55 DA. He replaced the battery with an Altima jell type battery. After it sits for two to three weeks he noticed the battery was not at full strength. After several chargings he believed the battery was defective. Prior to removing the battery we tested the...

I gave my machine a workout today lifting frozen wood piles. I couldn't get the temperature guage to indicate warm. It just entered the green section. My TC 45 required a water line from the block to be closed off to increase the operating range. Never thought to ask what degree thermostat...

I have three large brush piles that I would like to burn next week. I used the TC 55 to loosen up the snow and ice covered wood so the fire would get more air. About 100 feet out of the garage the engine stumbled to a halt after a half hour of warming up. I removed the fuel filter which was...

I bought an older western 5' snow plow off the internet. It must have been made for Kubota because it had a serial tag with Kubota stamped on it. The turn cylinders were 2 1/4" in diameter and featured a weld on backing plate. I took it to a hydraulic shop. They said heat the end and pull...

When I was trading my tc45 a dealer tested the transmission by holding the rpm @ 18-2000 rpm and ran the tractor forward and reverse at a very slow rate. Wouldn't say what he was looking for... just indicated the working capability was within specifications. When they are worn are they jerky...

While speaking to an elderly gentleman this weekend I learned he purchased a new 6610 ( 80 hp 4x4 with loader ) four years ago. He stated when the machine reached 350 hours the clutch was not working properly. He took it back to the dealer where they replaced the clutch for the sum of $1500...

We have 6 inches of wet snow and more on the way. The weight box works great. It is so compact I don't have to worry about it when backing close to objects. It is set at 561# and ... if a little is good, how much more can I add without stressing the rear axel? ( is set up for 200# additional...

I was spoiled with the 45 DA and the gas hood struts. Now I have the new TC 55 with the 1952 Packard manual hood rod. I am under the hood frequently and this "lack of" feature aggravates a sore spot. Soon as I scratch my head and figure an alternative it will be changed. The only problem I...

Needed a weight box to off set the snow plow on the John Deere 4110. I decided to construct one out of steel as it would be more compact and adjustable to my needs. I used some 2x2x1/4 angle I had in stock to form the exterior. I have some 1 1/2x3x24 inch bar stock pieces that weigh 25# each...

Bought a 5' western plow with cylinders and a Kubota mount ( don't know what it fit but it has a kubota tag and serial number ) off the computer for $100. The stock JD models are only 54" wide and do not cover the wheel tracks of my 4110 when angled. I designed an under frame mount with some...

The new Miller 185 wire feed is a great machine and makes you look like a pro. I fabricated the guards for a TC 55 DA and a Deere 4110. The tooth bar was built for a New Holland TC 45 D and remodeled to fit the 55. I used alot of small steel pieces left over from another job. Now all I need...

Deerhunter F350 ; This is the tooth bar I built for the TC 45 D. It also had a 6' HD bucket. The main upper support is 3/8 x 5 inch flat steel with the fab co cast steel fixtures and replacable teeth. It is wedged on the cutting edge and held in place by two side bucket bolts. Works...

I have been playing with the wire feed and the new TC 55. I have added a home built grill guard and a step for the right side ( wonder why it isn't standard ? ). I had to add additional brackets for the tooth bar as the bucket holes were in a higher location. Also new upper rear axle pins (...

Friday at five pm the new tractor arrived. It was sad to see the 45 go but I think the new one will be more comfortable in these surroundings. Got all the buttons figured out and have to add some accessories. This big blue thing is just awesome. Took some pictures, now I have to learn how to...

Per the area manager they were supposed to be available this month but have been pushed back to March of 07. Hope they have better production numbers on the cab than the TL series loader.

My TC 55 is two weeks over due. I visited my dealer to check on the status. He indicated it should have arrived but the new loader may be holding production up. We tracked it through the computer and found the tractor was assembled on 9-18. It also indicated the loader arrived on 9-16. As no...

The John Deere dealer where I bought the 4110 would not throw in a fender handle like the literature shows. Also said he would give me a deal on the mid mounted mower they had in stock. Turns out it wouldn't fit and offered a new one at near list price. Found a new mower at another dealer and...

The dealer called today with the serial number for my TC 55 DA. It will be built this week from what I understand. Hope the FEL is on schedule also. Sign me counting down til the delivery date !!

Saw it at Walden Book Store. A little pricey ( $29.95 ) but alot of good information and great illustrations. Hopefully it will go on sale soon !

Woods manufacturing purchased Central Fabricating in Schofield, Wisconsin approximately five years ago. They are breaking ground for a new plant in Mosinee about five miles south of their old facility. Great to have them in our county building quality equipment and employing many people. I...

Checked with several dealers.... received an agreeable trade price, very reputable business, wrote out the check for the down payment. Should take 6-8 weeks ( wanted one fresh off the assembly line ). EHSS, R-4 tires, quick release bucket, 72" HD bucket, 2 rear remotes, 270L loader, and a...

While pricing a new TC 55 D today the dealer stated the latest change is the " new and improved " 270 L loader. Supposed to be stronger, easier to mount, and made by a seperate US manufacturer to NH specs. Anyone have additional info ? Sometimes manufacturers find a cheaper way to build the...

I have been trying to get signed on in the classified section for the past month. Wrote 5 e mails... no response or solution. Here is hoping a moderator is listening .. err reading. Want to list my TC 45 D for sale. I would like to move up to a 55 soon. jr

Anyone have knowledge of the creeper gear system used in the gear drive cubs. I understand it is also used in the cub low boy series. Anyone know of an outlet where one could be purchased ? Thanks jr

My tc 45 d has tip and tilt. Up to now it was just fine til I hooked a 3 bottom 3 point plow to it. The top link was about 3 inches short to level the plow. I changed it with the manual link from my D-17 ac and it worked just fine. I always thought the ram looked a little short but it does...

My 4110 came with only the left fender handle. All the advertising shows 2 for this model. The dealer wants $33.00 for an additional one. I can't see that price for a piece of molded plastic and I consider it a safety item. JD customer service stated some models came with 2, others 1...

My friend just took delivery on a TC 55, electronic reverser, 18 LA loader, and 3 rear remotes. Anyone price one of these out lately ? Looks like a nice unit.

Mowing \"first crop \" with 4110 I know it is hard to believe but the snow and frost left the area. ( Wisconsin ) After a 3 day rain period the grass was ready for the first trim. I could not believe the difference between the 455 / 60" and the 4110 / 60". They must have turned up the rpm...

There is a snow blower advertised in an area shopper for a JD 420 with a sub frame, weight box, chains, and a hard cab for $500. He didn't know the model number and it is described in excellent condition. Could this be adapted to fit a 4110 ? It is about 75 miles away, thought I would check...

Bought a used Bradco backhoe for the TC 45 D. It was used on a Case skidsteer. I recently changed my hydraulic / hydrostatic fluid and have no idea what was in the skid steer. There is also a moisture issue as the unit is 4 years old stored outside. Would 90% of it come out if I placed the...

Checking out the bargains on e bay and noticed someone has John Deere CD repair / service manuals for 9.95 and 9.95 for shipping. I wouldn't mind having one but paying as much for shipping as the article just goes across my grain. Anyone have such a cd and is it as good as the written...

Reading another post apparently the standard alternator will not be adequate for additional lighting. The dealer didn't mention it at purchase time. Does anyone know the specs on both of them? Another friend stated it is not a true alternator but some type of magnetic pulse unit. Now I am...

7 Iron deck vs 60\"MMM deck Does anyone know the difference between the above two decks. One dealer says they are interchangable fitting the 4110 and the 4200 series tractors. The other dealer says they are different. The attachment kit I am sure would be different but the deck itself looks...

Just purchased a new 4110 john deere. I would like to build a front end loader for it and was wondering if anyone has constructed one and what thickness the materials are required to be. I think it would be a fun project and the machine is just big enough to do useful tasks. Thanks in advance.

Wrote the painful check today... delivery next week. Got to play with it at the dealership............. what a toy !!! Quite an upgrade from the 455. New cx-200 is $2500 with set up and delivery. He said they usually knock off a hundred if I pick it up and mount. Now my New Holland TC 45 D...

Does anyone know where I can buy an angle gear drive that is 1 to 3 ratio. Most I have seen are 1 to 1. I bought a flail mower and need the added speed for a nice clean cut. This should be able to adapt to a tractor pto. Thanks jr

Looking at a 2305 with a 54" deck. Anyone buy one outright and what was the best price? My dealer is offering a $900. deduct from retail ( plus set up ) I think the shipping is in the retail price already. Thanks in advance.

My 96 455 jd has done a great job and logged over 1900 hours. I am in the market for a replacement. Looked at a 4010 hst which is 4x4 and the right size. I also looked at a 2305 which is basically the same machine, more power, but a single speed hst and I believe a smaller gpm hydraulic pump...

Was in the process of designing a backhoe for my TC45D when I came across a used 611 Bradco hoe at a very reasonable price. It currently is set up for a skid steer. Factory mount is $1500.00 ( yikes !! ). Anyone have an idea how to design a mount that will work ?

I have just read the sales literature on the new 20 series. I can't find any difference between the 43 hp vs the 58 hp tractor. They seem to have the same weight, same cubic inch engine, hydraulic systems, transmissions, and all are turbocharged. I didn't read it but I assume it is an...

Kubota sure does a nice job with their cabs. Heat, air, visibility, style..... and the nearby dealer seems to be customer oriented. When I get all the New Holland engineering defects repaired I am going to seriously take a look at their tractors. At the rate I'm going new problems out number...

My brother just ordered a new TS 125 A New Holland with every feature except front weights. I can't wait to try out the air ride cab and all wheel lock up. It is entering an all GREEN community so I hope it measures up.

Does anyone know if the service manual will be available on CD in the near future ? It would be so nice to just print out the section you need and take it to the work bench where you know it will meet mr. grease and oil. I always end up with a photo copy to work with while the clean book...

I ordered a loader valve rebuild kit for my tc-45d. My local dealer said it was not rebuildable, a second dealer said they have done several and the kit is $34.70. I go back to the first dealer and he now finds it in the book for $35.31. The part is ordered and I am informed it contains...

Would like to build a 3 point rock rake with carbide tips on the roller. Anyone know a place that will just sell the steel roller at a reasonable price? One manufacture will part with one for $1600. I was thinking of starting with a 6' section of well casing, drilling the holes to add the...

In my old age I would like a hard cab of steel or fiberglass for my 45d. I haven't seen any NH literature or one with a cab. Has anyone viewed such an option or know of a custom built one that would be designed for this purpose? The larger tractors have some nice curved glass ones. Thanks in...

Sure is confusing. Two of three people I spoke with stated I didn't want the yellow top for a diesel tractor application. They stated if it wasn't drawn down substancially and brought back up it wouldn't cycle properly and may develop a memory at near full charge. The red top is recommended...

The dealer didn't have a real good explanation why it was an option on the tc 40 but not the 45. He did state some of the early 45s came setup internally for a mid mount. It appears to be the same identical tractor with 5 more hp. I was informed you could buy all the parts for a conversion...

Bought a used 6' flail mower with a broken gear drive. Apparently the small alum housing didn't hold alot of oil and the small offset gear arrangement ran dry. A new gear drive is very expensive and by counting the teeth it is geared 3 to 1 on the pto. I have a new holland 1 to 1 gearbox with...

I like the component size of the 55 but I am not willing to give up the hydro. A four speed is acceptable in an old vette but not in my tractor. ( then after I get a 55 I will need 10 more hp. ..... where does it end ? )

My TC 45D goes in for service next week. Most of the problems I have read on this site seem to have found my machine. The tilt and telescope, low engine heat, forward hydro sticks, the dash fogs up, and the hydraulic leaks down after a few minutes. What did I miss or should I have checked...