Search results

Well I just got my rent statement from the company that I rent my oxygen and acetylene and they want $470.00 for 5 years and that's to much. Where is the best place to buy my tanks from? I have seen some from $150.00 up to $800.00 and will I have a problem getting them filled. I had read...

Well a friend call me and said you not gonna believe what happen to me today.I was pulled over by the state police and he gave me a ticket that carries a fine up to 10,000 dollars. He was pulling a trailer with equipment on a trailer dull wheel pick up and they wrote him a ticket for not having...

well i guess this makes it official we are a dyeing breed. the virginia dept of game is going state wide having public meetings asking what to do to get the younger people intrested in fishing. the bottom line here is they or loosing a lot of money yearly because not many fishing licence or...

well i have run out of ideals now. i have a 1983 dometic 4000 watt generator, it's in a 1983 motor home i can't find any engine id without taking it out of the motor home witch is a major job. it has a tag says it was built by genrac. i called genrac they couldn't tell me anything i called...

my tn70 with all 4 tires loaded. how much should it weigh the fluid in the rear tires adds 800 lb each I think.

the wife and I have been watching this kid for over a year now and he is something else. you can log on to avery the drummer. com or he's on you tube. I enjoy watching a kid this age with the talent he has.

I read back thru 01 threads and didn't see anything on how to adjust my deck to get the ball park look on my lawn. whats the trick I have my deck set level now do I need to lower the back or front?

well i have went thru my collection of easy outs and i'm having the same problem i have all ways had they break. so i need me a new set and a good set of left hand drill bits. so what works best for you? give me some ideals thanks.

didn't really know where to put this so i thought here would do. these open sockets in the pics i got several years ago to replace o2 sencors on vehicle and sence then i have foud alot of uses for different sizes. i got them from a tooldealer who is no longer in business. the 2 i have are 1 1/16...

well i changed all my fluids in my tn70 today and i had what i concider alot of metal on the magnet on the rear drain on hyd fluid. i hpoe i don't have some kind a problem. has anyone else had this? been about 5 years sence changed.

well my neighbor has this troy built push mower came from lowes refurbished no warrenty. the spring you see was wraped aroud the kill switch that stops the fly wheel. it has fire and gas the first crank it tries to run but quits. he was mowing and it just quit and has not ran sence.

i am hoping to find some guys who have tow trucks or have worked on them? i decided to help a friend and install a new hyd valve box on his 1996 chalanger I 600 wrecker and now the wheel lift won't work everthing else works fine. there is a valve body on each side i replaced the one on the left...

i'm going to change the hyd fluid in my tn 70 and was just wondering if there is anything special i need to do as i change it?

well today is our 35 wedding anniversary and i promised the wife i take her out this evening and get her a happy meal. do you think i'm over doing it? i just carring on my wife is one of the most loving carring people in the world if not for her i would't have a pot to p*** in or a window to...

well the only way i could see to get the drive belt off of the crank pully was to take engine mounting bolts lose and lift moter above the metal plate, is that the only way or is there another way? also the 3 pullys that the belt rides on all spin ok but they sound awful dry would you replace...

seem's like every time i am working on something in the shop there is one thing i go to almost every time, when i was a kid we clled it the bent nail can - now i call it the junk box it;s kinda full.:thumbsup:

wouldn't you know it i have done took blade off tractor and put it in the barn oiled it up and now it'pouring down the snow got about a inch now.:laughing:

well my air greese gun blew up this morning so i got to have a new one. just wondred if there is any new guns that work as good or better than the air gun i have, i got it from napa about 5 years ago but would like a little better design than what mine is. the diaphram busted in mine so it's toast.

now i know why there is no little deer what must i do:laughing::laughing:

I now have some kinds problem with the water. i have a well 200 ft deep ihave a preasure tank and a switch on the line. my wife noticed that the water just stop's running for about 5 seconds or so and start's running again. i get a spurt of air when the water start's running. im going to check...

well as most of you know the wife lost her job of 30 year's company shut down she had figured up her severence pay and she new how to figure the taxes she done mine for year's for the people who worked for me. ok today she got her first check and they taxed it at 40 percent she is fit to be...

well my home made generater bit the dust but you can bet i will see it going again my 1970 model 8hp briggs give up now i need a 8hp or larger with 1 inch crank shaft

I am looking at this dianostic tool called the [CAR DR] just need some imput on weather it works or just another gimmic

well it's comming down good out of the east that most always a sign of a good one my problem child loves it

This morning my wife of 35 years and i were drinking our coffee and the weather man on tv was talking about the counties in pink were going to get 4 to 8 inches of snow thrusday i told she better look and see if we were in the pink she looked at me and said i don't care how much we get because i...

well don't have a job no more so i was looking at geting into escorting over size loads anyone ever done this any info would be helpful i have a friend who is looking at it to.

well the company my wife works for is closing there doors this month the hr person told them that if another company came in and bought them out before the close date that if they ofered her a job at less money per hour than she making now that she had to take the job or she would loose several...

ok im looking to replace my heat in garage it's metal building insulated well 30x40 i see the 6 element infrared heaters on sale for $158.00 suppose to heat 1500 square ft does anyone use these heaters and how efficent are they i have kerosene now but it just cost to much to heat thanks in...

can anyone tell me the best site to get auto repair info there are so many i don't have a clue witch one i need info on 95 grand prix thanks:confused:

my neighbor has a d17 seris 4 allis the starter is shot we don't have anyone in this area we can get any parts from where do i go i to get best price and quality on a rebuilt starter thanks:confused:

pics of my good friday tator patch doing good so far

a friend of mine is looking at a 53 jubilee he says everything looks ok and it sounds ok i no nothing about themis there any special things to look for and what do these tractors sellfor on average body looks good needs paint but not been abused:confused:

this is the earlist i ever planted so i will see what happens i heard from my parents and grandparents you always plant potatoes on good friday well first ever for me i planted 150 lb of potatoes today.:thumbsup:

it's great to see so many new members comming to tbn it's impossible to say hi to each one .this is a great place to pass time and learn things as well hope you all enjoy the time as much as i do i get some great advice from some very smart people and have fun doing it welcome to tbn all new...

here some pics of our first measurable snow of the winter108

i need some help my daughter has soda stains on her seats cloth seats what is the best method to remove them or get them as clean as possible thanks for your help in advance.:mad:if she would just pay attention this stuff would'nt happen wishful thinking.

i was thinking of trading my tn70 on a new manhindra the deller said my tractor with 320 hours was only worth 8000 bucks because no one wanted a two wheel drive tractor any more i said ok and left is my tractor is worth more isn't it.

ok i have never been one to voice an opnion but enough is enough.i have been a nascar fan sense 1969 but no more for me brad kelowiski was fined $25.000 for voicing his opnion about the new fuel injection system tha nascar put in place this season. they took a bailout from the goverment in 2010...

HI everyone from southwest va i read alot of intresting post before i joined look forward to learning and having fun.don't have alot of time for computer but i enjoy the time i have.:)