Search results

I need to replace the original seat with a more comfortable one. My dealer doesn't have one which is a direct fit. Has anyone replaced their seat with a suspension type? How difficult was it to do? I believe all of the 15 series used the identical seat.

In 1980 I bought a ceiling fan, no light. It has a pull switch which at the time required one pull on the chain to turn on or off. Fast forward to about 2015; ever since then it takes 5 pulls to turn it on, one to turn it off.

Has anyone who owns one of these ever had the need to remove the roll pins that secure the latch mechanism? I bought a repair kit which necessitates driving them out. I'm wondering if once I obtain the correct size punch, does it matter from which side the pin should be driven out? Does it come...

I was given a brand new Sunsei model SE1500 solar panel. Evidently the owner failed to buy, or lost the controller. I saw this one on Amazon, along with others. All I want to know is if it will work with my panel. https://www.amazon.com/gp/product/B072MMDY4F/ref=ask_ql_qh_dp_hza Any experts on...

This man never ceases to amaze me. The Torch, When Wrenches Just Don't Work - YouTube Andy can do with his feet which I would struggle to do with two hands.

My pan has leaked a little oil since 2005. Look at removal procedures makes me think the drive shaft must be removed for clearance.

When I turn the key to heat the plugs, the light no longer appears on the dash, and after 10 seconds there is no longer a shutoff click, as before. This causes hard starting at lower temps. I know the fuse is good, but there is no power to the plugs until I attempt to start the tractor, at which...

I Bought A Red Tractor? - YouTube

Never saw a blade like this, or a tractor set up like this. Wanted blade for tractor - wanted - by owner - sale

Surely it probably isn't odd to many, just an oldie I've not seen. It is sitting down at my neighbor's, ready to rake.

In 1976, at my first home in Oregon, I unearthed this wheel from a trash pit. I've always wondered what it was used on. Please help me find out.It measers 18" diameter. In one picture you see praying mantis hatching from the egg case stuck behind the wheel. I was working below as they were...

Lord, next time I'm tempted to complain about life on the farm, please remind me of this guy, my new inspiration. Ford To The Rescue......I'm Stuck!! - YouTube

Check out these neat products. I really like the John Deere PTO adapter. Three New Innovations That May Be Coming to Small Tractors - YouTube

My daughter came across one in the Orlando, FL area. If interested, I will post an image.

Has anyone rebuilt or repaired this jack? Mine is leaking at the bottom of the rods going through the springs. I guess there must be some failed O-rings, or seals. Without some guidance, I can't see how to properly tear it down. 1.5 Ton Aluminum Racing Floor Jack with Rapid Pump(R)

Not being certain where to categorize this thread, thought here most appropriate. The video you are about to watch was produced by the same individual who produced a number of videos on the Oroville dam in 2017. I found it to be very enlightening. California Wildfires 2018 - California's...

The access panel for the lever mechanism is practically impossible to reinstall. The one on mine is actually to big and so tight, it takes two people to wrestle it into position for lining up and inserting the bolts. Am I the only one with this problem? It's so bad I shudder at the thought of...

Somehow the nut holding my cam gear in place came off and fell into the oil pan. In the process the timing chain also broke. It is a very special hardened steel nut. It is chewed up and may be too unreliable to use. I'm hoping by the grace of God, someone on here has one or knows where I can...

It would only be in the way. Formula E: Mahindra Takes 2nd Podium Win This Season At Marrakech ePrix

I don't have television, but I am listening to game 1 on the radio. Right after the sixth inning there was a long Mahindra tractor commercial.

According to this article, Mahindra has a major technical center in Troy, Michigan. US Postal Service picks finalist to build next-generation mail truck | Fox News

All I can say is: thank God I don't have a computer on my tractor. If you have one on yours, say your prayers. Farmers lobbying for the right to fix own tractors | Miami Herald By NICHOLAS BERGIN Lincoln Journal Star LinkedIn Google+ Pinterest Reddit...

Pretty impressive look at Mahindras being made in India. Mahindra Tractor Manufacturing Video for Make in India Week - YouTube

There is a slow leak in the cylinder. I've been quoted $125.00 to repair. That sounds outrageous, as it seems to me a seal kit should be all that's needed. I was also told there is not a kit for the cylinder, just bring it in and they will replace needed parts. I'm not sure I believe this...

These are being made in southern Oregon, just down the road from my place. http://www.roguerovers.com/farmdogg The FarmDogg. Our first rover. Made in America. Built-to-Order. Open Source. The FarmDogg(R) was designed from the ground up. It's an all terrain, electric powered multipurpose work...

This was posted in parts/repairs, but I thought it might help the owner if I linked to it here. http://www.tractorbynet.com/forums/parts-repairs/334552-help-tractor-not-moving-need.html Default HELP!! Tractor not moving need to move today I was loading dumpster with bucket this morning...

Very informative video. I think this company is rock solid. Mahindra XUV500: Making of the XUV500 -- Inside Out on Discovery Channel - YouTube

In southern Oregon, we rarely face icy roads; so it is quite rare to face driving in such conditions - especially on a 59 year old, 2wd tractor. The story below was published in our local paper. How bad was it? | MailTribune.com Chris Crawford, Medford The recent cold snap led me to...

Has anyone tried these? pellets, Bear Mountain Forest Products Bear Bricks

Today, about 20 minutes into the Rush Limbaugh show, Rush aired a Mahindra commercial. It is the first radio ad I've heard for Mahindra, and Rush read the script, perfectly. It started off, "98% of owners say they would recommend Mahindra..."

I want to increase my firewood carrying capacity. If this is doable, I won't have to buy another set of forks for the 3 point hitch. Does anyone have an idea on the best way to add pins and a top link to this unit? I have an excellent mobile welding service so I don't have to transport it to a...

Howdy fellow Mahindra owners How cool is this? Mahindra Song - YouTube

Hi folks, I saw this on craigslist. Just a heads up. I hope this person gets the tractor back. 2007 Kubota M9540 STOLEN (Davis) Date: 2011-04-03, 5:47PM PDT Reply to: sale-5f9m9-2303649433@craigslist.org [Errors when replying to ads?] PLEASE HELP! Someone recently stole my tractor from Davis...

This sound fantastic, and makes a good argument for the value of carbon dioxide. Mass. company making diesel with sun, water, CO2 - Yahoo! News

I'm sure these folks won't try this at home, (again). Roseburg couple injured while removing yard stump | The News-Review - NRtoday.com A Roseburg couple's attempt to remove a stump from their yard sent both of them to the hospital when a cable stretched across their neighborhood road was...

I've never seen anyone here mention having one of these. My dealer is lukewarm about it when I mention getting one, because it will put the loads farther out, and decrease lift capacity. I'm not too concerned about it, unless it would be a significant loss. I really need to go from bucket to...

I saw this raritiy, and thought someone out there might be looking for a needle in a haystack. John Deere loader - $1500 (grants pass oregon) Reply to: sale-982951509@craigslist.org [?] Date: 2009-01-06, 3:32PM PST this is a jd loader for a 110/112 1964 lawn and garden tractor. not many...

I just saw this ad on craigs list:Naumes Equipment - GOING OUT OF BUSINESS BLOWOUT! Naumes Equipment - GOING OUT OF BUSINESS BLOWOUT! - $1 (Medford, OR) Reply to: sale-973229000@craigslist.org [?] Date: 2008-12-29, 10:19AM PST Kubota Parts, Oil, Shop Manuals, Paint, Owner's Manuals and much...

I know some of you guys are into mini-trucks. I have looked at the Suzuki Carry All, with a dump bed, and recently a Daihatsu. I was told the load capacity was only 780 lbs. Can that be correct? In comparison, I have a garden cart that has a 400# weight load. How could this mini-truck be...

What do you think about this? I went to a friend's house to do some weed eating for him. I thought I had enough fuel in my machine to do the job. Half way through, I ran out of gas. Knowing my friend has a lawn mower, I asked if he had any gas. He lead me out to his driveway, and his 1962...

Are there other TBN members who believes the production of ethanol is a lose, lose proposition in the United States? I offer this food for thought from a well respected professor of economics. If you are a farmer receiving a subsidy, have you taken land formerly producing other crops, to now...

Recently my Mahindra salesman asked if there was anything I did not like about my 2615 HST. I said the only thing coming to mind that due to the location of the hydraulic valve, it would be hard to exit the right side of the tractor, mainly in case of emergency. I told him I wished the...

Indias ,500 Car - Wheels - Autos - New York Times Blog I just saw this in the N.Y. Times, and thought it provided more insight into this company, and its products.

I suppose I could have posted this in the discussions, but I know others wander in here. What would it mean if Mahindra were green? And what would you do if Kubotas were blue? A red New Holland? I don't think so. John Deere in orange? Please say it ain't so. In all seriousness. What if...

Delightedly, there seems to be a dearth of complaints about these Mitsubishi made Mahindras. Yes indeed, it's a wonderful life!

Ladies and gentlemen, farmers, landscapers, orchardists, contractors, tractor lovers all. Lend me your ears. In 2000, due to a blown disc, I was forced to retire from 24 years as a landscape/irrigation contractor. During that time I had the opportunity to operate a myriad of equipment; from...

Most of the time I have been wearing a dust mask while operating my tractor. I researched and bought the I Can Breathe, brand. It is made of silk, and comes with replaceable carbon filters. I think it does a very good job of filtering dust, and it cuts down on the diesel exhaust, which can be...

I have been trying to post a review of my tractor. I know it doesn't go here, but I have not been successful in the Reviews section. Is this feature obsolete? I don't see any recent reviews of any brands. Furthermore, when I contact the admin. (3 times) I get no response. What's up? AB

Has anyone installed one of these on the 2615 or similar model Mahindra? Please share details and pics if possible, please. Thanks, AB

Who knows the magic formula for removing diesel fuel, and subsequently, the odor from clothing?

What size sockets are you guys using on the frame bolts, and the wheel lugs? My guess is anywhere from 20-22 mm.

Does anyone know why they leave these bare on the loaders? I notice Kubota, and John Deere have them protected.