Search results

I don't think people will ever learn. Here are a couple of pictures we took with my cell phone. We were on the interstate going about 65 mph when these were taken.

Ok, I sent two or maybe three e-mails to the administration about this problem over the last several weeks and never got any kind of response. Here is what is going on. If I click on to the Gallery tab at the top of the page, then click on My Gallery at the top of the next page. It takes me to...

I have a fiberglass camper shell cap on my F150. It was on the truck when I bought it, so I don't know what effect it has on mileage. It is level with the top of the cab and it has the sealed pass though to the cab. What I want to know is how does it effect gas mileage? Will the mileage be...

I wish there was a way to look up the pictures that you have posted. I know there has been more than once where I have posted a picture or diagram and then sometime later the same subject will come up again. Then, I post it again. There is no need to take up space on the servers. If I could only...

Bare-Co USA now has T&T kits for these brands. I don't know anything about the prices. I do know that they have to be sold through a retailer/dealer. Apparently, you can fill out their form on-line and they will forward it to dealer or that is the way it seems to work. Maybe if someone get a...

JB Hunt died. Here is the story. ArkansasBusiness.com - UPDATED: Don Tyson, Jim Lindsey Honor J.B. Hunt

Does anyone here have a Yanmar FX-2 or know does anyone know anything about that model? I am looking at one and can't find any information about it.

My photo gallery on TBN doesn't recognize me. Normally if I am logged in on TBN , I don't have to log in on the photo gallery. I am logged in on TBN, but I am not on the photo gallery and I can not log in. Is anyone else having this problem?

As posts are posted we see many times where someone says that a repair could have been covered by the dealer but wasn’t. Several of these posts at some point state that it was actually bailing wire or thorns etc that caused the problem, then some of the posts state that the owner caused the...

I was looking to see how something was made on a certain brand of backhoe a while ago in the photo section. It pertained to a certain model. That is when I noticed that most of the pictures told what was taking place in the photo, but didn't tell the model of tractor or loader etc. There was no...

Muhammad, It would be nice if a link could be placed on the member’s bio page that would take you to their Photo Gallery. Is that something that could be done? I don’t know anything about how any of this stuff runs except that you and your family does a fantastic job Thanks

Wow. Things had been loading really slow for the last day or two on TBN and this morning it was slower than slow. Then nothing. Is everything fixed now?

I was at Harbor Freight today. They had sent me a flyer showing Grade 43, 3/8" x 14’ chain with hooks for $16.99. I ask the manager if he had it in grade 70. He told me that the 5/16” x 20’ Grade 70 was the same price. I bought two of them. The sale goes through March 27, if anyone needs some...

There was some talk about Montana and a deal in North Carolina a while back as well as something’s said about them buying another company. Here are a couple of articles.Montana Arknasas Business

I am having a strange issue with the PM system. When someone sends me a PM, I get the notice in my e-mail that it is there. That is the only way that I know that someone has sent one. The icon that use to show up at the top of the page does not show up. The strange part is that when I get a...

Does any one here have a JD 790 that was made in India? Or has anyone ever seen one that said made in India on it?

If anyone is using the SeaMonkey browser, what are you using for a spell check? I can't find one that will work with it.

Check this chainsaw attachment out. I have thought about it a few times over the years. I thought that I would wind up breaking a blade. That is why I haven't tried to make one. Can't see how you could keep from messing up your chainsaw. I would like to see one actually work.

Check out this loooong TG230 from Europe. It sure would take a lot of room to turn it around. We shoot. That didn't work the way that it should have. Go down the page a little ways and click on the NH TG230.

Someone tell me if it's just me or there is a problem. For the last few days, TBN has loaded really slow because of the Google adds not loading. I can't pull up the Google search either. No one else has said anything that I have seen. So, Is it my computer or Google? BTW, I have DSL.

Just a little information for those that follow Montana tractors. Montana News

Several of you have made equipment dollys, here are some that are made for snow blades that I ran across. They might give you some more ideas or you even might want to buy some of these. The usual disclaimer-I an not related to anyone with this company nor am I friends or associated with anyone...

With all of the talk of late about some members welding, drilling and or otherwise modifying their ROPS, has anyone traded in a tractor to a dealer that has had such a ROPS? I mean one where it is apparent to the dealer that it has been modified?

One of our computers is a HP Pavilion with windows 98. When in use, the screen will flash on and off. If you turn the power off to the monitor for a few minutes, it is all right for a while. It doesn't do it even everyday. Just once in while, but when it does, you can't get anything done. I know...

I thought that I would post a few pictures of what I have been working on. This Link will take you to My Photo Gallery in the photo section. I made a sliding canopy a while back, to shade me when I am using the backhoe. There are also two pictures of the start of my overhead console. I will...

<font color="blue">The engine is equipped with a splined crankshaft for use as a front PTO.</font> Like some of the other here, I have been looking at Kioti tractors. Not to buy one, but to see how things develop with them. (You know, competition is good) I noticed a cool thing about the DK40...

I have a friend that is looking at a L3400 and has some questions that I haven't been able to answer. I want to know if these things are available from the dealer as factory. Can you get telescopic end links? Can you get a folding ROPS? What is the seat like? Is it a suspension seat? On the...

In the last five years here, there are always someone building shop etc. I there not anyone that uses steel trusses with legs? In my opinion, they are the way to go. You don't need as many and they make it faster to build the whole building.

Is anyone else having problems get to MY HOME? I am always logged in and up till the last couple of days, anytime I want to go to MY HOME, I just click the tab. The last few times, I have had to log in again, after clicking on the tab. Is it my computers problem or is it something new with TBN?

I need to know a few things about these Kubotas. If anyone can answer these questions, please let me know. In the past the L5030 has had a air conditioner problem. Has this problem been addressed by the factory? Has this problem been fixed to your satisfaction by your dealer? Is this problem...

Over the years here, several member have had the shear pin break starting the PTO. Many have discussed lowering the PTO speed before engagement. On the compact MF's that I have owned, they have a feather start on the PTO. You can start the PTO at full speed, if you was so inclined without...

.

Muhammad, We seem to have a problem with very long URLs. Is there anyway that you could fix it to where, when you place a url that you have to place it by name only. Such as the the url thing that pops up from he bottom of the post screen. Or is it that the members are just putting in the url...

Life expectancy of our tractor engines comes up here pretty often. I would like to say that the life of any engine is decreased as the rpm is increased. I am not saying that you are to run 1800 rpm on a engine designed to run 3600 rpm. What I am saying is that, if the rpm is increase to reach a...

Was this place down this morning or was it just my computer? Looked like it was down for about 1:30 AM until 11:??.

AGCO has just announced that they are taking over Valtra tractors of Finland, which will includes Sisu engines.

Does anyone here have factory remotes on their MF, AGCO or Cat compact? My dealer didn't plan ahead very well on the mounting of my remotes. If you do, could you post a picture of the coupler mount on the back of the tractor?

I just got my new tractor and I have already put receivers on the bucket. One on each side, to put hooks in and also to put a spill guard etc. Here is a picture of how it turned out. First shot.

I finely got my new tractor, loader and backhoe and it had a whole 1.7 hrs. on it when I pick it up. Its a MF 1440 tractor, a MF 1466 loader and a MF 1475 backhoe. Here is a picture. Without the backhoe.

Could someone please tell me how to fix a problem? The problem is on a new computer that I just bought. TBN and some other sites only use part of the screen. They take up all of the screen top to bottom, but only 1/2 to 2/3 of the screen right to left. There are a lot of sites that do use the...

They have finely got started putting my new MF 1440 together. This is the middle of hay season here and I thought that I would have to wait for a while longer to get it started. It may take a week or so to finish because of stopping to work on hay equipment.

I saw this by the road the other day and had to stop and take a picture. It is a Interational pick-up truck hood. Sorry, it was starting to get dark when I got there.

I took the time today to look in my AGCO/Massey sold Iseki Diesel Engine manual for the cross between Massey and Iseki. Here it is. Someone tell me if this Excel file works.

I would like to know how Agco/Massey/etc. stands behind their warranties. Has anyone had a major problem that the Corporate boys have been involved in? If you have, how did they handle it? Do you think that they handled it the way they should have?

I have a family friend that has Lou Gehrig's disease. She has progressed to the point that she cannot talk at all. Her husband and son have been looking for an inexpensive lap top computer that she could carry with her to talk to people with. Does anyone know where they could get a used or...

I have a daughter that is about two years away from starting college. She has been looking into different areas of financial aid. Does anyone have any information about a group called College Degree Planners, LLC. <A target="_blank"...

This not meant as a lecture or to grip anyone out. It is also not meant at any one directly. We have been blessed lately with manufactures, mechanics and a dealer. I do say blessed because of their insight that they have been able to provide. These gentlemen have answered all of our questions to...

I have had flats on the front tires out in the field more than once. From reading here several others have too. Well, here a while back I was about a mile from the house on the farm and had a flat. Everyone knows the old story of you can walk back home and get the air tank to air it up or just...

Saturday I tried out my, new to me, Danuser post driver. My father-in-law called and wanted me to help put in some posts around his bale pen. It works great even in our rocky soil. I don’t think that I will be using my post auger very much any more.

Check out this site. It has all kinds of tractor sites on it. It has both clubs and personal tractor sites. <A target="_blank" HREF=http://www.carlynx.com/tra/tra.htm>http://www.carlynx.com/tra/tra.htm</A>

Latest and biggest news in the tractor world happened Monday. It was announced Monday that AGCO (Massey Ferguson) had bought Caterpillars tracked tractor line. AGCO has bought them lock, stock and barrel. Now AGCO’s line doesn’t stop at the mid size 225 horse tractors, but goes up through 425hp...

Could some one please tell me the difference between a Pentium and a Celeron processor? As in performance, speed and over all usability. I am looking at buying a new computer and I am to say the least confused.

Do any of you own a Danuser PTO drive, post driver. If you do, have you had any problems with it? What would one in like new condition sell for in your area?

Bird, Didn't you say at one time that you had a Wells Ag canopy? My dealer just started carrying them. I need to buy one because I am on my tractor EVERYDAY and need some protection from mother nature. I don't want a fiberglass canopy and that was the only thing that I could find in my area...

I have found a real good publication from the University of Georgia about the rescuing of farm accident victims. I thought that it might be of interest to several here. It deals with all sorts of accidents that can happen on farms from tractor overturns to chemical exposure. Check it out at...

Muhammad, We could use more space in the members profile area for attachments. I have typed them in and also pasted them in and they always get cut off. A larger text window would be nice. Could this be changed without to much of a problem? Thanks JerryG

I have made a few things to make life easier on my tractor or to make-work easier. Here is a photo of a wheel weight bracket. The holes that the bolts are in have been cut so that carriage bolt heads will fit and the bolt will not turn during tightening. I put 4-50lb. weights on each bracket...